https://woodworksbyjohn.com/2026/03/18/imitation-is-the-sincerest-form-of-flattery/https://woodworksbyjohn.com/wp-content/uploads/2026/03/securing-spandrel-to-frame-1.jpegSecuring spandrel to framehttps://woodworksbyjohn.com/wp-content/uploads/2026/03/oil-gilding-frame-and-spandrel.jpegOil gilding frame and spandrelhttps://woodworksbyjohn.com/wp-content/uploads/2026/03/first-light-by-diane-eugster-cropped.jpegFirst Light by Diane Eugster (cropped)https://woodworksbyjohn.com/wp-content/uploads/2026/03/first-light-by-diane-eugster.jpegFirst Light by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2026/02/molding-profile-1.jpegMolding Profilehttps://woodworksbyjohn.com/wp-content/uploads/2026/02/tall-rabbet-rip-blade.jpegTall Rabbet! Rip Bladehttps://woodworksbyjohn.com/wp-content/uploads/2026/02/molding-profile.jpegMolding Profilehttps://woodworksbyjohn.com/wp-content/uploads/2026/02/spacers-to-create-rabbet.jpegSpacers to create rabbethttps://woodworksbyjohn.com/wp-content/uploads/2026/02/back-of-frame.jpegBack of Framehttps://woodworksbyjohn.com/wp-content/uploads/2026/02/screenshot-2026-02-06-at-12.52.18-pm.pngScreenshot 2026-02-06 at 12.52.18 PM2026-03-18T17:18:07+00:00monthlyhttps://woodworksbyjohn.com/2026/02/14/a-bit-of-whimsy-and-milk-paint-frame-280/https://woodworksbyjohn.com/wp-content/uploads/2026/02/once-upon-a-time-by-diane-eugster.jpegOnce Upon a Time by Diane EugsterOnce Upon a Time2026-02-14T17:34:30+00:00monthlyhttps://woodworksbyjohn.com/2025/10/25/carved-fans-frame-for-a-dancer/https://woodworksbyjohn.com/wp-content/uploads/2025/10/milk-paint-osmo.jpegMilk Paint & OSMOhttps://woodworksbyjohn.com/wp-content/uploads/2025/10/laying-out-fan-blades-1.jpegLaying out fan bladeshttps://woodworksbyjohn.com/wp-content/uploads/2025/10/inspiration-and-first-attempt-1.jpegInspiration and first attempt2025-10-31T16:00:35+00:00monthlyhttps://woodworksbyjohn.com/2025/10/10/cutting-coves-on-table-saw/https://woodworksbyjohn.com/wp-content/uploads/2025/10/sanding-cove-1.jpegSanding Covehttps://woodworksbyjohn.com/wp-content/uploads/2025/10/cove-cutting-jig.jpegCove Cutting JigMy cove cutting jighttps://woodworksbyjohn.com/wp-content/uploads/2025/10/img_2162.jpegIMG_2162What you need2025-10-10T22:36:39+00:00monthlyhttps://woodworksbyjohn.com/2025/09/27/wood-or-plastic-whats-your-choice/https://woodworksbyjohn.com/wp-content/uploads/2025/09/all-the-parts-1.jpegAll the Parts!https://woodworksbyjohn.com/wp-content/uploads/2025/09/the-final-piece-3.jpegThe Final Piecehttps://woodworksbyjohn.com/wp-content/uploads/2025/09/the-final-piece-2.jpegThe Final Piecehttps://woodworksbyjohn.com/wp-content/uploads/2025/09/makeshift-jig-2-1.jpegMakeshift Jig 2https://woodworksbyjohn.com/wp-content/uploads/2025/09/tools-used-for-joinery-1.jpegTools Used for Joineryhttps://woodworksbyjohn.com/wp-content/uploads/2025/09/beech-tray-1.jpegBeech Trayhttps://woodworksbyjohn.com/wp-content/uploads/2025/09/img_2138-1.jpegIMG_2138https://woodworksbyjohn.com/wp-content/uploads/2025/09/tools-used-for-joinery.jpegTools Used for Joineryhttps://woodworksbyjohn.com/wp-content/uploads/2025/09/img_2138.jpegIMG_2138https://woodworksbyjohn.com/wp-content/uploads/2025/09/beech-tray.jpegBeech Tray2025-09-28T00:17:33+00:00monthlyhttps://woodworksbyjohn.com/2025/09/03/two-frames-270-271/https://woodworksbyjohn.com/wp-content/uploads/2025/09/tools-for-cutting-peas.jpegTools for Cutting Peashttps://woodworksbyjohn.com/wp-content/uploads/2025/09/profile-cuts.jpegProfile Cutshttps://woodworksbyjohn.com/wp-content/uploads/2025/09/osmo-polyx-3043-1.jpegOsmo Polyx 3043https://woodworksbyjohn.com/wp-content/uploads/2025/09/422-beads-lee-valley-plow-plane.jpeg!/4" Beads, Lee Valley Plow planePlow plane for 1/4" beadshttps://woodworksbyjohn.com/wp-content/uploads/2025/09/pattern-tools-frame-271.jpegPattern/Tools Frame 2712025-09-03T20:01:21+00:00monthlyhttps://woodworksbyjohn.com/2024/12/15/peas-frame-256/https://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1295.jpegIMG_1295https://woodworksbyjohn.com/wp-content/uploads/2024/12/topright-4-0.jpegTop&Right 4/0https://woodworksbyjohn.com/wp-content/uploads/2024/12/carved-pea-sample.jpegCarved Pea Samplehttps://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1239.jpegIMG_1239Cut with double bevel 1F/8 on center line of peahttps://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1244.jpegIMG_1244Final brushing to clear chips, the burnisher/sealer should fill in any remaining gouge marks.https://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1240.jpegIMG_1240Cut in with 8/6mm gouge to center from one direction, use brush to remove chip and cut from other sidehttps://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1242.jpegIMG_1242I took 2 shallow cuts, gradually going to center. Followed up with almost vertical outline of the pea.https://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1211.jpegIMG_1211Creating 1/4" bead with small plow planehttps://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1243.jpegIMG_1243Use a single bevel, 8mm chisel, goal is to remove the chip between each of the peas.2025-09-03T19:36:07+00:00monthlyhttps://woodworksbyjohn.com/2025/08/16/have-you-missed-me-im-back/2025-08-17T03:02:54+00:00monthlyhttps://woodworksbyjohn.com/2025/06/28/danish-loveseat-finished/2025-06-28T18:38:09+00:00monthlyhttps://woodworksbyjohn.com/2025/06/23/danish-loveseat-part-3/https://woodworksbyjohn.com/wp-content/uploads/2025/06/mike-pekovich-method-1-1.jpegMike Pekovich Method - 1Lay out on tape using spacerhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/fine-tuning-mortise-2-1.jpegFine Tuning Mortise - 2Chisel work to scribed lineshttps://woodworksbyjohn.com/wp-content/uploads/2025/06/2c2b0-angle-for-wedge-2.jpeg2° Angle for Wedge2° angle for outer wallshttps://woodworksbyjohn.com/wp-content/uploads/2025/06/fine-tuning-mortise-1.jpegFine Tuning Mortise - 1https://woodworksbyjohn.com/wp-content/uploads/2025/06/forming-arm-rest.jpegForming Arm RestBeginning of endhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/after-tablesaw-1.jpegAfter tablesawMaterial removed for webbing, rip bladehttps://woodworksbyjohn.com/wp-content/uploads/2025/06/seat-webbing-complete.jpegSeat webbing completeFinished with 2" webbing installedhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/ready-to-assemble-2.jpegReady to assembleSquared off and chiseled smoothhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/glued-clamped-1.jpegGlued & ClampedGlued and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/front-haunched-m-t-1.jpegFront haunched M/THaunched tenon on front rail2025-06-25T13:37:13+00:00monthlyhttps://woodworksbyjohn.com/2025/06/09/danish-loveseat-part-2/https://woodworksbyjohn.com/wp-content/uploads/2025/06/ready-to-assemble-1.jpegReady to assemblehttps://woodworksbyjohn.com/wp-content/uploads/2025/06/seat-back-layout.jpegSeat back layoutDouble checking slat lengthhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/setup-for-tenons-with-dado.jpegSetup for tenons with dado3/8" dado set up for tenonshttps://woodworksbyjohn.com/wp-content/uploads/2025/06/tenon-sizing-4img_1756.jpegTenon sizing - 4IMG_1756Squaring shoulders and easing end of tenonhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/mortising-seatback.jpegMortising SeatbackMortising top and bottom railshttps://woodworksbyjohn.com/wp-content/uploads/2025/06/tenon-sizing-3.jpegTenon Sizing - 3Removing wastehttps://woodworksbyjohn.com/wp-content/uploads/2025/06/final-step.jpegFinal StepRoundover bit to radius all edgeshttps://woodworksbyjohn.com/wp-content/uploads/2025/06/tenon-sizing-2-jpeg.jpegTenon sizing -Scribing width and cuttinghttps://woodworksbyjohn.com/wp-content/uploads/2025/06/tenon-sizing-1.jpegFine tuning cheeksDialing in thickness with rabbet block planehttps://woodworksbyjohn.com/wp-content/uploads/2025/06/ready-to-assemble.jpegReady to assembleChiseling complete and sanded2025-06-10T02:21:09+00:00monthlyhttps://woodworksbyjohn.com/2025/06/07/danish-inspired-loveseat/https://woodworksbyjohn.com/wp-content/uploads/2025/06/img_1703-2.jpegIMG_1703https://woodworksbyjohn.com/wp-content/uploads/2025/06/img_1703-1.jpegIMG_1703https://woodworksbyjohn.com/wp-content/uploads/2025/06/img_1703.jpegIMG_1703https://woodworksbyjohn.com/wp-content/uploads/2025/06/side-insert.jpegSide insertInsert hole at top, pilot hole for connector bolthttps://woodworksbyjohn.com/wp-content/uploads/2025/06/left-side-all-fits.jpegLeft Side -- all fits!https://woodworksbyjohn.com/wp-content/uploads/2025/06/transferred-to-frame.jpegTransferred to FrameTransferred to frame, ready for insert on drill press holehttps://woodworksbyjohn.com/wp-content/uploads/2025/06/pilot-hole-backrest-frame.jpegPilot Hole Backrest/FramePilot hole from drill press in back rest, located on framehttps://woodworksbyjohn.com/wp-content/uploads/2025/06/installing-insert.jpegInstalling insertHand pressure only, hex driver for inserthttps://woodworksbyjohn.com/wp-content/uploads/2025/06/seat-frame-insert.jpegSeat frame insert3/8" hole for threaded insert, seat railhttps://woodworksbyjohn.com/wp-content/uploads/2025/06/15c2b0-tenons.jpeg15° Tenons2025-06-07T19:27:35+00:00monthlyhttps://woodworksbyjohn.com/2025/05/16/crazy-challenge-hexagon-box-with-hinged-lid/https://woodworksbyjohn.com/wp-content/uploads/2025/05/image.jpegImageAlmost ready to gluehttps://woodworksbyjohn.com/wp-content/uploads/2025/05/beginnings.jpegBeginningshttps://woodworksbyjohn.com/wp-content/uploads/2025/05/end-cuts.jpegEnd Cutshttps://woodworksbyjohn.com/wp-content/uploads/2025/05/making-the-end.jpegMaking the EndFirst cutshttps://woodworksbyjohn.com/wp-content/uploads/2025/05/tails-centered.jpegTails CenteredTails laid out, scribing shouldershttps://woodworksbyjohn.com/wp-content/uploads/2025/05/chisel-to-outline-scribed-lines.jpegChisel to outline scribed linesMaking scribe lines deeper made final chisel work easierhttps://woodworksbyjohn.com/wp-content/uploads/2025/05/chisel-to-scribed-line.jpegChisel to scribed lineFitting and scribing onto hexagonhttps://woodworksbyjohn.com/wp-content/uploads/2025/05/removing-the-waste-1.jpegRemoving the waste - 1Awkward position but able to chisel waste outhttps://woodworksbyjohn.com/wp-content/uploads/2025/05/removing-the-waste-2.jpegRemoving the waste - 2Used body weight to hold hexagon on scrap and chiseled out wastehttps://woodworksbyjohn.com/wp-content/uploads/2025/05/separating-the-lid.jpegSeparating the Lid2025-05-16T18:44:14+00:00monthlyhttps://woodworksbyjohn.com/2025/04/24/frame-266-milk-paint-beads-clavos/https://woodworksbyjohn.com/wp-content/uploads/2025/04/layout-for-clavos-1.jpegLayout for ClavosDividers used to locate clavoshttps://woodworksbyjohn.com/wp-content/uploads/2025/04/corner-carve-1.jpegCorner CarveMiter area, about 2 1/4"https://woodworksbyjohn.com/wp-content/uploads/2025/04/installing-clavos.jpegInstalling ClavosInstalling the clavoshttps://woodworksbyjohn.com/wp-content/uploads/2025/04/traildust-frame-layout-1.jpegTraildust Frame LayoutLayout, area removed at center and miterhttps://woodworksbyjohn.com/wp-content/uploads/2025/04/center-carve-1.jpegCenter CarveCenter area, about 3 1/2"https://woodworksbyjohn.com/wp-content/uploads/2025/04/img_1612.jpegIMG_1612https://woodworksbyjohn.com/wp-content/uploads/2025/04/img_1610.jpegIMG_1610https://woodworksbyjohn.com/wp-content/uploads/2025/04/2nd.-cut-on-rabbet-1.jpeg2nd. cut on rabbethttps://woodworksbyjohn.com/wp-content/uploads/2025/04/squaring-outer-edge-1.jpegSquaring outer edge2025-04-24T16:49:59+00:00monthlyhttps://woodworksbyjohn.com/2025/03/05/something-new-frame-263/https://woodworksbyjohn.com/wp-content/uploads/2025/02/force-of-nature-by-diane-eugster.jpegForce of Nature by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2025/02/full-pattern.jpegFull Patternhttps://woodworksbyjohn.com/wp-content/uploads/2025/02/preparing-stock.jpegPreparing Stockhttps://woodworksbyjohn.com/wp-content/uploads/2025/02/pattern-pieces.jpegPattern & Pieceshttps://woodworksbyjohn.com/wp-content/uploads/2025/02/woodworksbyjohn-filigree-frame.jpegWoodworksbyJohn -- Filigree Framehttps://woodworksbyjohn.com/wp-content/uploads/2025/02/first-idea.jpegFirst Idea2025-03-05T16:58:31+00:00monthlyhttps://woodworksbyjohn.com/2024/12/23/the-eugster-collared-floater-frame/https://woodworksbyjohn.com/wp-content/uploads/2024/12/eugster-collared-floater-frame.jpegEugster Collared Floater Framehttps://woodworksbyjohn.com/wp-content/uploads/2024/12/the-in-between.jpegThe In Betweenhttps://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1325.jpegIMG_1325https://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1322.jpegIMG_1322https://woodworksbyjohn.com/wp-content/uploads/2024/12/img_1275.jpegIMG_12752024-12-24T03:37:26+00:00monthlyhttps://woodworksbyjohn.com/2024/11/08/custom-family-trophy/2024-11-10T03:00:41+00:00monthlyhttps://woodworksbyjohn.com/2024/11/03/japanese-tool-box-in-ash/https://woodworksbyjohn.com/wp-content/uploads/2024/11/woodworksbyjohn-5.jpegWoodworksbyJohn-5Connor's https://woodworksbyjohn.com/wp-content/uploads/2024/11/woodworksbyjohn-6.jpegWoodworksbyJohn-6Rory'shttps://woodworksbyjohn.com/wp-content/uploads/2024/11/woodworksbyjohn-4.jpegWoodworksbyJohn-4Japanese Toolbox for Roryhttps://woodworksbyjohn.com/wp-content/uploads/2024/11/woodworksbyjohn-2.jpegWoodworksbyJohn-2Top view, loved the grain in the lids!https://woodworksbyjohn.com/wp-content/uploads/2024/11/woodworksbyjohn-3.jpegWoodworksbyJohn-3Japanese Toolbox for Connorhttps://woodworksbyjohn.com/wp-content/uploads/2024/11/woodworksbyjohn-1.jpegWoodworksbyJohn-1End Viewhttps://woodworksbyjohn.com/wp-content/uploads/2024/10/img_1099.jpegIMG_1099Bandsaw table tilted at 10° and wedge cut.https://woodworksbyjohn.com/wp-content/uploads/2024/10/img_1103.jpegIMG_1103Box part, wedge, and lid batten. Holes marked to screws and plugs.https://woodworksbyjohn.com/wp-content/uploads/2024/10/img_1100.jpegIMG_1100Used a block plane to remove ridges left by bandsaw.https://woodworksbyjohn.com/wp-content/uploads/2024/10/img_1118.jpegIMG_1118Attaching battens, the one with arrow is first, about 1/4" from end. Here you can see the sliding/removable tray.2024-11-03T19:56:07+00:00monthlyhttps://woodworksbyjohn.com/2024/08/08/i-dont-care-if-it-is-a-dry-heat/https://woodworksbyjohn.com/wp-content/uploads/2024/08/french-cleats-1.jpegFrench Cleatshttps://woodworksbyjohn.com/wp-content/uploads/2024/08/before-after-chamfer-1.jpegBefore & After Chamferhttps://woodworksbyjohn.com/wp-content/uploads/2024/08/100-holes-1.jpeg100 Holes!https://woodworksbyjohn.com/wp-content/uploads/2024/08/drilling-pilot-holes-1.jpegDrilling Pilot holeshttps://woodworksbyjohn.com/wp-content/uploads/2024/08/french-cleats.jpegFrench Cleatshttps://woodworksbyjohn.com/wp-content/uploads/2024/08/img_0835.jpegIMG_0835https://woodworksbyjohn.com/wp-content/uploads/2024/08/boot-jack-by-john-eugster-2.jpegBoot Jack by John Eugster-2https://woodworksbyjohn.com/wp-content/uploads/2024/08/step-3-scribing-final-edge.jpegStep 3: Scribing final edgehttps://woodworksbyjohn.com/wp-content/uploads/2024/08/drilling-pilot-holes.jpegDrilling Pilot holeshttps://woodworksbyjohn.com/wp-content/uploads/2024/08/step-i-locating-inlay.jpegStep I: locating inlay2024-08-08T21:17:22+00:00monthlyhttps://woodworksbyjohn.com/2024/07/11/is-leather-my-new-rabbit-hole/https://woodworksbyjohn.com/wp-content/uploads/2024/07/img_0773.jpegIMG_0773https://woodworksbyjohn.com/wp-content/uploads/2024/07/img_0747.jpegIMG_0747https://woodworksbyjohn.com/wp-content/uploads/2024/07/stitching-pony.jpegStitching Ponyhttps://woodworksbyjohn.com/wp-content/uploads/2024/07/img_0770.jpegIMG_0770https://woodworksbyjohn.com/wp-content/uploads/2024/07/img_0765.jpegIMG_0765https://woodworksbyjohn.com/wp-content/uploads/2024/07/img_0771.jpegIMG_0771https://woodworksbyjohn.com/wp-content/uploads/2024/07/img_0766.jpegIMG_0766https://woodworksbyjohn.com/wp-content/uploads/2024/07/gettin-groovy.jpegGettin' Groovy2024-07-11T21:10:01+00:00monthlyhttps://woodworksbyjohn.com/2024/05/06/how-to-make-picture-frame-for-stretched-canvas-from-1-thick-wood/https://woodworksbyjohn.com/wp-content/uploads/2024/05/15c2b0-profile-1.jpeg15c2b0-profile-1https://woodworksbyjohn.com/wp-content/uploads/2024/05/beading-complete-1.jpegBeading Completehttps://woodworksbyjohn.com/wp-content/uploads/2024/05/cut-3-rip-fence-1.jpegCut #3 rip fence slightly movedhttps://woodworksbyjohn.com/wp-content/uploads/2024/05/completed-lay-out-w-tools-3.jpegCompleted Lay Out w/toolshttps://woodworksbyjohn.com/wp-content/uploads/2024/05/completed-lay-out-w-tools-2.jpegCompleted Lay Out w/toolshttps://woodworksbyjohn.com/wp-content/uploads/2024/05/cut-2-1.jpegCut #2https://woodworksbyjohn.com/wp-content/uploads/2024/05/cut-1-1.jpegCut #1https://woodworksbyjohn.com/wp-content/uploads/2024/05/completed-lay-out-w-tools-1.jpegCompleted Lay Out w/toolshttps://woodworksbyjohn.com/wp-content/uploads/2024/05/completed-lay-out-w-tools.jpegCompleted Lay Out w/tools2024-05-07T02:17:32+00:00monthlyhttps://woodworksbyjohn.com/2024/03/31/paisleys-perch-aka-modern-cat-furniture/https://woodworksbyjohn.com/wp-content/uploads/2024/03/pais.jpegpais2024-03-31T19:41:27+00:00monthlyhttps://woodworksbyjohn.com/2024/03/12/frame-249-real-milk-paint-and-their-chippy-product/2024-03-12T23:04:11+00:00monthlyhttps://woodworksbyjohn.com/2023/12/27/silver-leaf-and-textured-cove/https://woodworksbyjohn.com/wp-content/uploads/2023/12/air-brush-for-shellac.jpegAir brush for Shellachttps://woodworksbyjohn.com/wp-content/uploads/2023/12/laying-on-cove.jpegLaying on covehttps://woodworksbyjohn.com/wp-content/uploads/2023/12/leaf-paper.jpegLeaf & Paperhttps://woodworksbyjohn.com/wp-content/uploads/2023/12/gray-burnisher-sealer.jpegGray Burnisher/Sealerhttps://woodworksbyjohn.com/wp-content/uploads/2023/12/japan-black-on-edges-cove-taped.jpegJapan Black on Edges, cove tapedhttps://woodworksbyjohn.com/wp-content/uploads/2023/12/shellac-sealer-after-carving-1.jpegShellac sealer after carving2023-12-28T04:03:27+00:00monthlyhttps://woodworksbyjohn.com/2023/12/09/real-milk-paint-for-frame-245/https://woodworksbyjohn.com/wp-content/uploads/2023/12/img_0176-1.jpegimg_0176-12023-12-09T23:51:59+00:00monthlyhttps://woodworksbyjohn.com/2023/11/18/z-chair-project-completed/https://woodworksbyjohn.com/wp-content/uploads/2023/11/draw-bore-tool-1-1.jpegDraw Bore toolhttps://woodworksbyjohn.com/wp-content/uploads/2023/11/lay0ut-for-sculpting-1-1.jpegLay0ut for Sculptinghttps://woodworksbyjohn.com/wp-content/uploads/2023/11/front-of-arm-rest-1-1.jpegFront of Arm Resthttps://woodworksbyjohn.com/wp-content/uploads/2023/11/arm-rest-sculpting-1-1.jpegArm Rest Sculptinghttps://woodworksbyjohn.com/wp-content/uploads/2023/11/0-biscuit-for-arm-rest-1-1.jpeg#0 Biscuit for Arm Resthttps://woodworksbyjohn.com/wp-content/uploads/2023/11/img_0130-1.jpegIMG_0130https://woodworksbyjohn.com/wp-content/uploads/2023/11/front-of-arm-rest-1.jpegFront of Arm Resthttps://woodworksbyjohn.com/wp-content/uploads/2023/11/img_0130.jpegimg_0130https://woodworksbyjohn.com/wp-content/uploads/2023/11/lay0ut-for-sculpting-1.jpegLay0ut for Sculptinghttps://woodworksbyjohn.com/wp-content/uploads/2023/11/arm-rest-sculpting-1.jpegArm Rest Sculpting2024-11-03T23:59:26+00:00monthlyhttps://woodworksbyjohn.com/2023/11/08/part-3-classic-z-chair-continues/https://woodworksbyjohn.com/wp-content/uploads/2023/11/screenshot-2023-11-07-at-5.02.53-pm.pngscreenshot-2023-11-07-at-5.02.53-pmhttps://woodworksbyjohn.com/wp-content/uploads/2023/11/img_0107.jpegimg_01072023-11-08T16:37:16+00:00monthlyhttps://woodworksbyjohn.com/2023/10/26/part-2-my-take-on-the-classic-z-chair/https://woodworksbyjohn.com/wp-content/uploads/2023/10/img_0038-1.jpegimg_0038-12023-10-26T22:14:16+00:00monthlyhttps://woodworksbyjohn.com/2023/10/14/beginnings-my-take-on-the-classic-z-chair/https://woodworksbyjohn.com/wp-content/uploads/2023/10/adjusting-width-of-back-and-leg.jpegAdjusting width of back and leghttps://woodworksbyjohn.com/wp-content/uploads/2023/10/seat-frame-1.jpegSeat Framehttps://woodworksbyjohn.com/wp-content/uploads/2023/10/finalizing-web-mortise-1.jpegFinalizing web mortisehttps://woodworksbyjohn.com/wp-content/uploads/2023/10/sliding-table-2.jpegSliding Tablehttps://woodworksbyjohn.com/wp-content/uploads/2023/10/75c2b0-tenon-set-up-2.jpeg75° Tenon Set-uphttps://woodworksbyjohn.com/wp-content/uploads/2023/10/routing-slots-for-seat-webbing-clips-1.jpegRouting slots for seat webbing clipshttps://woodworksbyjohn.com/wp-content/uploads/2023/10/75c2b0-tenon-set-up-1.jpeg75° Tenon Set-uphttps://woodworksbyjohn.com/wp-content/uploads/2023/10/sliding-table-1.jpegSliding Tablehttps://woodworksbyjohn.com/wp-content/uploads/2023/10/75c2b0-tenon-set-up.jpeg75° Tenon Set-uphttps://woodworksbyjohn.com/wp-content/uploads/2023/10/routing-slots-for-seat-webbing-clips.jpegRouting slots for seat webbing clips2023-10-14T15:53:43+00:00monthlyhttps://woodworksbyjohn.com/2023/09/24/sapele-display-unit/https://woodworksbyjohn.com/wp-content/uploads/2023/09/drill-press-set-up-for-counter-bore-and-screw-holes-1.jpegDrill press set up for counter bore and screw holes2023-09-25T02:37:25+00:00monthlyhttps://woodworksbyjohn.com/2023/08/24/frame-243-two-piece-frame-for-greener-pastures/https://woodworksbyjohn.com/wp-content/uploads/2023/08/frame-243-profile.jpegFrame #243 Profile2023-08-24T23:03:50+00:00monthlyhttps://woodworksbyjohn.com/woodworking-portfolio/https://woodworksbyjohn.com/wp-content/uploads/2021/06/contemporary-cigar-humidor-woodworks-by-john.jpegContemporary Cigar Humidor- Woodworks by Johnhttps://woodworksbyjohn.com/wp-content/uploads/2020/01/ebonizedoak-12x16-1.jpgEbonizedOak 12x16 - 1https://woodworksbyjohn.com/wp-content/uploads/2018/08/tablestraight-woodworks-by-john-1.jpgTableStraight Woodworks by John - 1Cherry Sofa Table with inset Kumiko designhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/tableangled-woodworks-by-john-1.jpgTableAngled Woodworks by John - 1Cherry Sofa Table 14" x 36" x 30"https://woodworksbyjohn.com/wp-content/uploads/2018/07/enhanced-photo-1.jpgEnhanced Photo - 1https://woodworksbyjohn.com/wp-content/uploads/2018/07/dreaming-in-blue-11.jpgDreaming in Blue - 1https://woodworksbyjohn.com/wp-content/uploads/2018/07/beadedlandscapeframe-1.jpgBeadedLandscapeFrame - 1https://woodworksbyjohn.com/wp-content/uploads/2018/02/shopmademldg-1.jpgShopMadeMldg - 1Shop Made Molding finished 2 wayshttps://woodworksbyjohn.com/wp-content/uploads/2018/02/gilded-floater-style-1.jpggilded Floater Style - 1Gilded Floater with texture to complement paintinghttps://woodworksbyjohn.com/wp-content/uploads/2018/02/floater-style-1.jpgVersion 2Gilded Floater Frame2023-04-29T14:43:04+00:00weekly0.6https://woodworksbyjohn.com/2023/04/22/frame-240-art-nouveau-carved-motif/2023-04-22T21:22:57+00:00monthlyhttps://woodworksbyjohn.com/2023/03/29/night-stands-are-done-final-blog/https://woodworksbyjohn.com/wp-content/uploads/2023/03/woodworksbyjohn-over-all-view.jpegWoodworksbyJohn - Over-all Viewhttps://woodworksbyjohn.com/wp-content/uploads/2023/03/woodworksbyjohn-front-view-1.jpegWoodworksbyJohn - Front ViewContemporary Night Stands2023-03-30T13:27:39+00:00monthlyhttps://woodworksbyjohn.com/2023/03/21/vertical-grain-nightstands-part-ii/https://woodworksbyjohn.com/wp-content/uploads/2023/03/img_4564.jpegimg_4564https://woodworksbyjohn.com/wp-content/uploads/2023/03/checking-for-square.jpegChecking for squarehttps://woodworksbyjohn.com/wp-content/uploads/2023/03/holes-for-pegs-at-drawer-back.jpegHoles for pegs at drawer backhttps://woodworksbyjohn.com/wp-content/uploads/2023/03/stands-clamped-up-1.jpegStands Clamped-up2023-03-21T17:32:59+00:00monthlyhttps://woodworksbyjohn.com/2023/02/23/vg-douglas-fir-night-stands-part-i/2023-02-24T03:15:55+00:00monthlyhttps://woodworksbyjohn.com/2023/01/30/frame-238-summer-hues-by-diane-eugster/https://woodworksbyjohn.com/wp-content/uploads/2023/01/morning-hues-by-diane-eugster-1.jpegMorning Hues by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2023/01/img_4374.jpegimg_4374https://woodworksbyjohn.com/wp-content/uploads/2023/01/corner-detail-lay-out.jpegCorner Detail Lay-outhttps://woodworksbyjohn.com/wp-content/uploads/2023/01/morning-hues-by-diane-eugster.jpegMorning Hues by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2023/01/img_4393.jpegimg_4393https://woodworksbyjohn.com/wp-content/uploads/2023/01/ground-out-design.jpegGround out designhttps://woodworksbyjohn.com/wp-content/uploads/2023/01/carving-bench.jpegCarving Bench2023-01-30T19:28:45+00:00monthlyhttps://woodworksbyjohn.com/2022/12/17/covid-wont-stop-me/https://woodworksbyjohn.com/wp-content/uploads/2022/12/break-of-day-by-diane-eugster-1.jpegBreak of Day by Diane Eugster2022-12-17T14:30:31+00:00monthlyhttps://woodworksbyjohn.com/2022/11/19/making-tabernacle-frame-234/2022-11-21T00:39:44+00:00monthlyhttps://woodworksbyjohn.com/2022/11/17/guestroom-cabinet-or-the-battle-of-birch-is-over/https://woodworksbyjohn.com/wp-content/uploads/2022/11/chest-on-stand-woodworks-by-john.jpegChest on Stand Woodworks by Johnhttps://woodworksbyjohn.com/wp-content/uploads/2022/11/details-woodworks-by-john.jpegDetails Woodworks by Johnhttps://woodworksbyjohn.com/wp-content/uploads/2022/11/img_4222-1.jpegimg_4222-1https://woodworksbyjohn.com/wp-content/uploads/2022/11/img_4221-2.jpegimg_4221-2https://woodworksbyjohn.com/wp-content/uploads/2022/11/side-hung-drawer-detail-1.jpegSide Hung Drawer Detailhttps://woodworksbyjohn.com/wp-content/uploads/2022/11/img_4222.jpegimg_4222https://woodworksbyjohn.com/wp-content/uploads/2022/11/img_4221-1.jpegimg_4221-1https://woodworksbyjohn.com/wp-content/uploads/2022/11/img_4221.jpegimg_4221https://woodworksbyjohn.com/wp-content/uploads/2022/11/side-hung-drawer-detail.jpegSide Hung Drawer Detailhttps://woodworksbyjohn.com/wp-content/uploads/2022/11/guest-room-cabinet.jpegGuest Room Cabinet2022-11-18T15:12:19+00:00monthlyhttps://woodworksbyjohn.com/2022/10/13/my-battle-with-birch/https://woodworksbyjohn.com/wp-content/uploads/2022/10/tails-laid-out-1.jpegTails laid outhttps://woodworksbyjohn.com/wp-content/uploads/2022/10/img_4106.jpegimg_4106https://woodworksbyjohn.com/wp-content/uploads/2022/10/img_4126.jpegimg_4126https://woodworksbyjohn.com/wp-content/uploads/2022/10/rabbet-on-tail-board.jpegRabbet on Tail Boardhttps://woodworksbyjohn.com/wp-content/uploads/2022/10/tails-laid-out.jpegTails laid outhttps://woodworksbyjohn.com/wp-content/uploads/2022/10/img_4125.jpegimg_4125https://woodworksbyjohn.com/wp-content/uploads/2022/10/img_4127.jpegimg_4127https://woodworksbyjohn.com/wp-content/uploads/2022/10/img_4081.jpegimg_4081https://woodworksbyjohn.com/wp-content/uploads/2022/10/img_4091.jpegimg_4091https://woodworksbyjohn.com/wp-content/uploads/2022/10/chest-on-stand.jpegchest-on-stand2022-10-14T04:54:11+00:00monthlyhttps://woodworksbyjohn.com/2022/08/29/latest-frame-profile-232/2022-08-29T23:12:40+00:00monthlyhttps://woodworksbyjohn.com/2022/07/30/wall-hung-cabinet-part-ii/https://woodworksbyjohn.com/wp-content/uploads/2022/07/pockets-for-half-blind-dovetail-1.jpegPockets for Half Blind Dovetail2022-08-01T00:32:04+00:00monthlyhttps://woodworksbyjohn.com/2022/07/26/wall-hung-cabinet-part-i/https://woodworksbyjohn.com/wp-content/uploads/2022/07/wall-cabinet-1-woodworksbyjohn-1.jpegWall Cabinet -1 WoodworksbyJohn2022-07-27T00:35:57+00:00monthlyhttps://woodworksbyjohn.com/2022/07/23/small-details-maximum-time/https://woodworksbyjohn.com/wp-content/uploads/2022/07/pull-detail-woodworksbyjohn.jpegPull Detail WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2022/07/vertical-grain-douglas-fir-woodworksbyjohn.jpegVertical Grain Douglas Fir WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2022/07/ready-to-glue-1-1.jpegReady to Gluehttps://woodworksbyjohn.com/wp-content/uploads/2022/07/creating-pulls-1.jpegCreating Pullshttps://woodworksbyjohn.com/wp-content/uploads/2022/07/ready-to-glue-1.jpegReady to Gluehttps://woodworksbyjohn.com/wp-content/uploads/2022/07/ready-to-glue.jpegReady to Gluehttps://woodworksbyjohn.com/wp-content/uploads/2022/07/creating-pulls.jpegCreating Pulls2022-07-23T19:35:41+00:00monthlyhttps://woodworksbyjohn.com/2022/06/07/sharpening-opinions-please/https://woodworksbyjohn.com/wp-content/uploads/2022/06/vertical-grain-dougfir-experiment.jpegVertical Grain DougFir experimenthttps://woodworksbyjohn.com/wp-content/uploads/2022/06/chisel-sharpening-day.jpegChisel Sharpening Day2022-06-11T02:19:03+00:00monthlyhttps://woodworksbyjohn.com/2022/05/18/finally-carving-chisel-holder/https://woodworksbyjohn.com/wp-content/uploads/2022/05/carving-chisel-rack.jpegCarving Chisel Rackhttps://woodworksbyjohn.com/wp-content/uploads/2022/05/carving-corner-woodworks-by-john.jpegCarving Corner Woodworks by Johnhttps://woodworksbyjohn.com/wp-content/uploads/2022/05/marking-to-size-shelf.jpegMarking to Size Shelfhttps://woodworksbyjohn.com/wp-content/uploads/2022/05/hand-planing-chamfer.jpegHand Planing Chamferhttps://woodworksbyjohn.com/wp-content/uploads/2022/05/angled-bottom-shelf-1.jpegAngled Bottom Shelfhttps://woodworksbyjohn.com/wp-content/uploads/2022/05/angled-bottom-shelf.jpegAngled Bottom Shelfhttps://woodworksbyjohn.com/wp-content/uploads/2022/05/hand-cut-dado.jpegHand Cut Dadohttps://woodworksbyjohn.com/wp-content/uploads/2022/05/angled-dado.jpegAngled Dadohttps://woodworksbyjohn.com/wp-content/uploads/2022/05/forstner-bit-holes.jpegForstner Bit Holes2022-05-20T19:53:18+00:00monthlyhttps://woodworksbyjohn.com/2022/04/03/floater-frame-technique/2022-04-06T23:33:51+00:00monthlyhttps://woodworksbyjohn.com/2022/03/29/danish-cord-hall-bench/https://woodworksbyjohn.com/wp-content/uploads/2022/03/marking-joints.jpegMarking Joints2022-03-29T23:16:36+00:00monthlyhttps://woodworksbyjohn.com/2022/02/12/simplified-method-for-sliding-drawers/2022-02-12T20:17:36+00:00monthlyhttps://woodworksbyjohn.com/2022/01/11/new-year-new-home-and-new-shop/2022-01-12T15:17:35+00:00monthlyhttps://woodworksbyjohn.com/2021/08/03/trestle-frame-215/2021-08-04T14:21:24+00:00monthlyhttps://woodworksbyjohn.com/2021/07/07/its-all-about-the-wood-zebrawood-valet/https://woodworksbyjohn.com/wp-content/uploads/2021/07/zebrawood-valet-4-woodworksbyjohn.jpegZebrawood Valet-4 WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2021/07/zebrawood-valet-2-woodworksbyjohn.jpegZebrawood Valet-2 WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2021/07/zebrawood-valet-5-woodworksbyjohn-1-1.jpegZebrawood Valet-5 WoodworksbyJohn (1)https://woodworksbyjohn.com/wp-content/uploads/2021/07/zebrawood-valet-16woodworksbyjohn-1.jpegZebrawood Valet-16WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2021/07/zebrawood-valet-17woodworksbyjohn-1.jpegZebrawood Valet-17WoodworksbyJohn2021-07-08T03:57:10+00:00monthlyhttps://woodworksbyjohn.com/2021/06/24/donkey-ear-shooting-board-and-box-dividers/https://woodworksbyjohn.com/wp-content/uploads/2021/06/box-inserts-1.jpegBox Insertshttps://woodworksbyjohn.com/wp-content/uploads/2021/06/original-miter-shooting-board.jpegOriginal Miter Shooting Boardhttps://woodworksbyjohn.com/wp-content/uploads/2021/06/dividers.jpegDividershttps://woodworksbyjohn.com/wp-content/uploads/2021/06/donkey-ears-in-use-1.jpegDonkey Ears in Use 1https://woodworksbyjohn.com/wp-content/uploads/2021/06/routing-v-groove.jpegRouting V-Groovehttps://woodworksbyjohn.com/wp-content/uploads/2021/06/measuring-width.jpegMeasuring Widthhttps://woodworksbyjohn.com/wp-content/uploads/2021/06/transferring-measurement.jpegTransferring Measurementhttps://woodworksbyjohn.com/wp-content/uploads/2021/06/process-1-1.jpegProcess-1 (1)https://woodworksbyjohn.com/wp-content/uploads/2021/06/donkey-ears-in-use-2.jpegDonkey Ears in Use 2https://woodworksbyjohn.com/wp-content/uploads/2021/06/donkey-ear-shooting-board.jpegDonkey Ear Shooting Board2021-06-25T01:33:00+00:00monthlyhttps://woodworksbyjohn.com/2021/05/26/kitchen-re-do-bamboo-island/2021-05-27T00:37:19+00:00monthlyhttps://woodworksbyjohn.com/2021/04/13/contemporary-cigar-humidor/2021-04-14T00:28:53+00:00monthlyhttps://woodworksbyjohn.com/2021/03/13/entry-door-project/2021-03-14T15:12:57+00:00monthlyhttps://woodworksbyjohn.com/2021/03/01/__trashed/2021-03-03T07:20:39+00:00monthlyhttps://woodworksbyjohn.com/2020/08/06/frame-talk-4-traditional-water-gilding-23k-gold-leaf/https://woodworksbyjohn.com/wp-content/uploads/2020/08/drifting-by-diane-eugster.jpegDrifting by Diane EugsterDrifting by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/clay-bole-1-1.jpegClay-Bole - 1Clay/bole Processhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/drifting-by-diane-eugster-1.jpegDrifting by Diane Eugster - 1https://woodworksbyjohn.com/wp-content/uploads/2020/08/gesso-1.jpegGesso - 1Gesso Processhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/clay-bole-1.jpegClay-Bole - 1https://woodworksbyjohn.com/wp-content/uploads/2020/08/cutting-leaf-1.jpegCutting Leaf - 1Cutting the gold leafhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/photo-of-touch-up-1.jpegPhoto of touch up - 1Applying with gilders tip after wetting clay/bolehttps://woodworksbyjohn.com/wp-content/uploads/2020/08/burnish-begin-1.jpegBurnish begin - 1Beginning burnishing with agatehttps://woodworksbyjohn.com/wp-content/uploads/2020/08/finish-mount-1.jpegFinish Mount - 1Mounting detailshttps://woodworksbyjohn.com/wp-content/uploads/2020/08/casein-black-1.jpegCasein Black - 1Casein for edges2021-02-26T01:39:47+00:00monthlyhttps://woodworksbyjohn.com/2021/02/10/redwood-gate/2021-02-11T00:34:10+00:00monthlyhttps://woodworksbyjohn.com/2021/01/18/2020-ends-2021-begins/2021-01-18T17:18:27+00:00monthlyhttps://woodworksbyjohn.com/2020/12/08/layout-and-carving-the-guilloche-design/2021-02-19T00:18:43+00:00monthlyhttps://woodworksbyjohn.com/2020/11/28/frame-205-guilloche/2020-11-28T19:57:51+00:00monthlyhttps://woodworksbyjohn.com/2020/11/17/carved-frame-and-paring-chisel/https://woodworksbyjohn.com/wp-content/uploads/2020/11/screen-shot-2020-11-17-at-11.33.53-am.pngScreen Shot 2020-11-17 at 11.33.53 AMhttps://woodworksbyjohn.com/wp-content/uploads/2020/11/progress.jpegProgressWitness marks show off squarehttps://woodworksbyjohn.com/wp-content/uploads/2020/11/close-up.jpegClose UpFinished but check the sides!https://woodworksbyjohn.com/wp-content/uploads/2020/11/initial-grind-done.jpegInitial Grind DoneSquared up with rough stonehttps://woodworksbyjohn.com/wp-content/uploads/2020/11/img_2414.jpegIMG_2414Ebay Findhttps://woodworksbyjohn.com/wp-content/uploads/2020/11/corner-in-progress-1.jpegCorner in Progress - 1Corner Progress - 2https://woodworksbyjohn.com/wp-content/uploads/2020/11/corner-progress-2.jpegCorner Progress - 2Corner Progress - 12020-11-18T02:32:15+00:00monthlyhttps://woodworksbyjohn.com/2020/11/07/unique-and-interesting-commission/2020-11-07T18:49:26+00:00monthlyhttps://woodworksbyjohn.com/2020/08/13/utilitarian-project-kitchen-improvement/https://woodworksbyjohn.com/wp-content/uploads/2020/08/pantry-cabinet-aa-1.jpegPantry Cabinet AA - 1https://woodworksbyjohn.com/wp-content/uploads/2020/08/pantry-cabinet-hinges-1.jpegPantry Cabinet Hinges - 1Installed, note notches for the hingeshttps://woodworksbyjohn.com/wp-content/uploads/2020/08/drawer-slide-1-1.jpegDrawer Slide -1 - 1MDF cut to highest slide, drilled and attachedhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/drawer-slide-2-1.jpegDrawer Slide -2 - 1Re-cut MDF for next slide positionhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/drawer-slide-3-1.jpegDrawer Slide -3 - 1Repeat process till donehttps://woodworksbyjohn.com/wp-content/uploads/2020/08/parts-ready-1.jpegParts Ready - 1https://woodworksbyjohn.com/wp-content/uploads/2020/08/assembly-1-1.jpegAssembly-1 - 1Detail of bottom https://woodworksbyjohn.com/wp-content/uploads/2020/08/assembly-2-1.jpegAssembly-2 - 1Fingers and bottom gluedhttps://woodworksbyjohn.com/wp-content/uploads/2020/08/assembly-3-1.jpegAssembly-3 - 1Clamped and tacked = Done!https://woodworksbyjohn.com/wp-content/uploads/2020/08/finger-joints-1.jpegFinger Joints - 1SawStop with Finger Joint Jig2020-08-14T16:52:09+00:00monthlyhttps://woodworksbyjohn.com/2020/07/16/traditional-dovetailed-drawer-hand-tool-tutorial/https://woodworksbyjohn.com/wp-content/uploads/2020/07/drawer-groove-1.jpegDrawer Groove - 1Grooves for drawer bottomhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/stanley-140-trick-1.jpegStanley 140 Trick - 1Step at front, Stanley 140 trickhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/cutting-tails-1.jpegCutting Tails - 1First cuts for dovetailhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/notch-for-saw-1.jpegNotch for Saw - 1Chiseled notch to aid sawhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/chisel-clearance-1.jpegChisel Clearance - 1Chiseled notch to provide clearance for chisel bevelhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/transfer-to-pinboard-1.jpegTransfer to Pinboard - 1Holding Fixture for transferring tail layouthttps://woodworksbyjohn.com/wp-content/uploads/2020/07/chopping-out-1.jpegChopping out - 1Removing material, time for careful fitting!https://woodworksbyjohn.com/wp-content/uploads/2020/07/transferring-2-1.jpegTransferring #2 - 1Finishing the Layouthttps://woodworksbyjohn.com/wp-content/uploads/2020/07/dado-lay-out1-1.jpegDado Lay-out1 - 1Scribe lines for dado, notch edge with chisel first to help guide sawhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/dado-lay-out-2-1.jpegDado Lay-out 2 - 1Router plane to scribe edge2020-07-19T01:16:49+00:00monthlyhttps://woodworksbyjohn.com/2020/07/12/count-your-blessings/https://woodworksbyjohn.com/wp-content/uploads/2020/07/season-of-hope-by-diane-eugster-1.jpegSeason of Hope by Diane Eugster - 1Season of Hope Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/season-of-hope-12kt-oil-gilded-1.jpegSeason of Hope 12kt Oil Gilded - 1Oil gilding the edgehttps://woodworksbyjohn.com/wp-content/uploads/2020/07/season-of-hope-assembled-frames-1.jpegSeason of Hope Assembled Frames - 1Glued and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/season-of-hope-milled-parts-1.jpegSeason of Hope Milled Parts - 1Basswood preparedhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/season-of-hope-miter-jig-1.jpegSeason of Hope Miter Jig - 1Pieces mitered https://woodworksbyjohn.com/wp-content/uploads/2020/07/dovetailed-box-1-1.jpegDovetailed Box-1 - 1Cutting the Dovetailshttps://woodworksbyjohn.com/wp-content/uploads/2020/07/dovetailed-box-2-1.jpegDovetailed Box-2 - 1Forming the lidhttps://woodworksbyjohn.com/wp-content/uploads/2020/07/dovetailed-box-3-1.jpegDovetailed Box-3 - 1Completed Box; 3"x4"x7"https://woodworksbyjohn.com/wp-content/uploads/2020/07/tea-box-1.jpegTea Box - 1Tea Box; Big Leaf Maple & Walnuthttps://woodworksbyjohn.com/wp-content/uploads/2020/07/tea-box-details-1.jpegTea Box Details - 12020-07-12T18:23:42+00:00monthlyhttps://woodworksbyjohn.com/2020/06/27/walnut-picture-frame-201/https://woodworksbyjohn.com/wp-content/uploads/2020/06/rabbet-bevel-1.jpgRabbet & Bevel - 1Tablesaw work complete https://woodworksbyjohn.com/wp-content/uploads/2020/06/smooth-plane-1.jpgSmooth Plane - 1#4 Lie-Nielsen Smooth Planehttps://woodworksbyjohn.com/wp-content/uploads/2020/06/beading-1.jpgBeading - 1Bead formed and sandedhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/frame-201-clamped-1.jpgFrame #201 Clamped - 1Mitered, biscuits, and clamped over-nighthttps://woodworksbyjohn.com/wp-content/uploads/2020/06/corner-detail-201-1.jpgCorner Detail #201 - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/dons-compound-by-devon-meyer-1.jpgDon's Compound by Devon Meyer - 1Don's Compound by Devon Meyer2020-06-28T00:17:45+00:00monthlyhttps://woodworksbyjohn.com/2013/08/27/hand-cut-dovetails-spalted-maple/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-51.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-5https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-41.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-4Initial Cutshttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-31.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-21.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/spalted-maple1.jpgSpalted Maplehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-spaletedmaple-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-SpaletedMaple-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-spaletedmaple-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-SpaletedMaple-1https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-5Flipped Over to Complete Cutshttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-4https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-slidingtopbox-handcutdovetail-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingTopBox-HandcutDovetail-32020-06-21T22:50:35+00:00monthlyhttps://woodworksbyjohn.com/2020/06/16/tablesaw-push-stick-heres-mine/https://woodworksbyjohn.com/wp-content/uploads/2020/06/layout-mortise-1.jpgLayOut Mortise - 1Mortise Laid Outhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/choppingout-1-1.jpgChoppingOut-1 - 1In Progess .......https://woodworksbyjohn.com/wp-content/uploads/2020/06/chopping-out-2-1.jpgChopping Out -2 - 1...... and done!https://woodworksbyjohn.com/wp-content/uploads/2020/06/in-use-1.jpgIn-Use - 1Push Stick in Usehttps://woodworksbyjohn.com/wp-content/uploads/2020/06/details-1.jpgDetails - 1Close up viewhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/old-push-stick-1.jpgOld Push Stick - 12021-04-11T12:30:36+00:00monthlyhttps://woodworksbyjohn.com/2020/06/05/mitered-birch-mantle-aka-packing-tape-assembly/https://woodworksbyjohn.com/wp-content/uploads/2020/06/rabbet-ends-1-1.jpgRabbet Ends - 1Rabbeting for end capshttps://woodworksbyjohn.com/wp-content/uploads/2020/06/box-1-1.jpgBox - 1 - 1Pieces mitered and splinedhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/removal-1-1.jpgRemoval 1 - 1Bow saw to cut an inch or two..https://woodworksbyjohn.com/wp-content/uploads/2020/06/removal-2-1.jpgRemoval 2 - 1.... then chisel and hammerhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/assembly-1-1.jpgAssembly -1 - 1First side assembled, bar clamps keep it all togetherhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/assembly-2-1.jpgAssembly -2 - 1Side two, used lots of tape!https://woodworksbyjohn.com/wp-content/uploads/2020/06/new-screen-1.jpgNew Screen - 1New Fireplace Screenhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/end-1-1.jpgEnd -1 - 1One side slightly offhttps://woodworksbyjohn.com/wp-content/uploads/2020/06/end-2-1.jpgEnd -2 - 1Sliding bevel square and block planehttps://woodworksbyjohn.com/wp-content/uploads/2020/06/tile-space-1-1.jpgTile Space - 1 - 1First Pass2020-06-05T21:00:25+00:00monthlyhttps://woodworksbyjohn.com/2020/05/26/april-may-covid-19-shop-changes/https://woodworksbyjohn.com/wp-content/uploads/2020/05/grandsons-initials-1.jpgGrandsons Initials - 1Grandsons Initial Plaqueshttps://woodworksbyjohn.com/wp-content/uploads/2020/05/carvedcat-1.jpgCarvedCat - 1Stylized Cat on Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/cornersample-1.jpgCornerSample - 1Stepped Frame Samplehttps://woodworksbyjohn.com/wp-content/uploads/2020/05/doxie-1.jpgDoxie - 1Dauschund on Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/newbox-1-1.jpgNewBox-1 - 1Side view showing leg designhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/newbox-2-1.jpgNewBox-2 - 1Drawers feature half-blind, hand cut dovetailshttps://woodworksbyjohn.com/wp-content/uploads/2020/05/hinged-box-2.jpgHinged box - 2https://woodworksbyjohn.com/wp-content/uploads/2020/05/hinged-box-1.jpgHinged box - 1https://woodworksbyjohn.com/wp-content/uploads/2020/05/triton-spindle-belt-1.jpgTriton Spindle-Belt - 1Triton Belt/Spindle Sanderhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/cementwork-1.jpgCementWork - 12020-05-26T20:12:37+00:00monthlyhttps://woodworksbyjohn.com/2020/05/05/the-color-of-asphalt-frame-197/https://woodworksbyjohn.com/wp-content/uploads/2020/05/the-color-of-asphalt-1.jpgThe Color of Asphalt - 1The Color of Asphalt by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/the-color-of-asphalt-detail-1.jpgThe Color of Asphalt - detail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/resawing-1.jpgResawing - 1Resawing pieces for the steps -- surfaced to 3/16"https://woodworksbyjohn.com/wp-content/uploads/2020/05/edgeprep-1-1.jpgEdgePrep-1 - 1Glue scraped, "witness" pencil lines https://woodworksbyjohn.com/wp-content/uploads/2020/05/edgeprep-2-1.jpgEdgePrep-2 - 1Jack Plane evens out layershttps://woodworksbyjohn.com/wp-content/uploads/2020/05/layering-1-1.jpgLayering - 1 - 1Shooting Boardhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/layering-2-1.jpgLayering - 2 - 1Step One, glued, pinned, & clampedhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/layering-3-1.jpgLayering - 3 - 1Step Threehttps://woodworksbyjohn.com/wp-content/uploads/2020/05/layering-4-1.jpgLayering - 4 - 1Final step glued and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2020/05/edge-4-1.jpgEdge - 4 - 1Durham Rock Hard Putty2020-05-05T22:25:35+00:00monthlyhttps://woodworksbyjohn.com/2020/04/14/frame-talk-3-ebonizing-basswood/https://woodworksbyjohn.com/wp-content/uploads/2020/04/floater-cradle-2-1-1.jpgFloater Cradle-2 - 1Pre-drilling mounting holeshttps://woodworksbyjohn.com/wp-content/uploads/2020/04/floater-cradle-1.jpgFloater Cradle - 1Cradling the panelhttps://woodworksbyjohn.com/wp-content/uploads/2020/04/experimental-paint-1.jpgExperimental Paint - 1On The Road by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2020/04/experiment-detail-1.jpgExperiment Detail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2020/04/ebonizing-basswood-3-coats-1.jpgEbonizing Basswood, 3 Coats - 13 Coats, even the plywood took some color!2020-04-14T18:39:15+00:00monthlyhttps://woodworksbyjohn.com/2020/03/29/fun-with-chisels-and-a-stanley-271-router-plane/https://woodworksbyjohn.com/wp-content/uploads/2020/03/oak-chechem-box-1-1.jpgOak-Chechem Box-1 - 1Completed box closedhttps://woodworksbyjohn.com/wp-content/uploads/2020/03/oak-chechem-box-2-1.jpgOak-Chechem Box-2 - 1Completed box openhttps://woodworksbyjohn.com/wp-content/uploads/2020/03/done-1.jpgDone - 1Lid is donehttps://woodworksbyjohn.com/wp-content/uploads/2020/03/routerplane-1.jpgRouterPlane - 1Router Plane after chisel justhttps://woodworksbyjohn.com/wp-content/uploads/2020/03/hingechisel-1-1.jpgHingeChisel-1 - 1Beginning Chisel Cutshttps://woodworksbyjohn.com/wp-content/uploads/2020/03/hingelayout-1-1.jpgHingeLayout-1 - 1Scribing on the Masking Tape2021-01-09T16:52:05+00:00monthlyhttps://woodworksbyjohn.com/2020/03/24/another-dovetail-tutorial-social-distanced/https://woodworksbyjohn.com/wp-content/uploads/2020/03/tails-1-1.jpgTails - 1 - 11.) Rabbet the endshttps://woodworksbyjohn.com/wp-content/uploads/2020/03/tails-2-1.jpgTails - 2 - 12.) Cut both boards at same timehttps://woodworksbyjohn.com/wp-content/uploads/2020/03/tails-3-1.jpgTails - 3 - 11.) Relief cut for chisel bevehttps://woodworksbyjohn.com/wp-content/uploads/2020/03/tails-4a-1.jpgTails - 4a - 12.) Checking square of tailshttps://woodworksbyjohn.com/wp-content/uploads/2020/03/tails-4b-1.jpgTails - 4b - 13.) Checking square of base/shoulderhttps://woodworksbyjohn.com/wp-content/uploads/2020/03/bottomgroove-1.jpgBottomGroove - 14.) Bottom Groovehttps://woodworksbyjohn.com/wp-content/uploads/2020/03/pins-1-1.jpgPins-1 - 12.) Jig to hold while scribinghttps://woodworksbyjohn.com/wp-content/uploads/2020/03/pins-2-1.jpgPins-2 - 11.) Transfer Jig in usehttps://woodworksbyjohn.com/wp-content/uploads/2020/03/pins-3-1.jpgPins-3 - 12.) Small pieces better when removing materialhttps://woodworksbyjohn.com/wp-content/uploads/2020/03/pins-1.jpgPins - 11.) Chalk after scribing2020-03-24T20:30:25+00:00monthlyhttps://woodworksbyjohn.com/2020/03/01/frame-talk-2-sherri-profile/https://woodworksbyjohn.com/wp-content/uploads/2020/02/assembled-clamped-1-1.jpgAssembled-clamped - 1Clamped and Glued The biscuit is that oval piecehttps://woodworksbyjohn.com/wp-content/uploads/2020/02/stockprep-1.jpgStockPrep - 1Hand Planing the first edgehttps://woodworksbyjohn.com/wp-content/uploads/2020/02/stockprep-3-1.jpgStockPrep-3 - 1Tadpole sandershttps://woodworksbyjohn.com/wp-content/uploads/2020/02/stockprep-2-1.jpgStockPrep-2 - 1Triple bead cutter on shaperhttps://woodworksbyjohn.com/wp-content/uploads/2020/02/burnisher-sealer-1.jpgBurnisher-Sealer - 1Burnisher Sealerhttps://woodworksbyjohn.com/wp-content/uploads/2020/02/sherriprofile-1.jpgSherriProfile - 112" x 12" Framehttps://woodworksbyjohn.com/wp-content/uploads/2020/02/sherriprofile-detail-1.jpgSherriProfile-detail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2020/02/prepstock-1.jpgPrepStock - 1Face Planing the "show face"https://woodworksbyjohn.com/wp-content/uploads/2020/02/assembled-clamped-1.jpgAssembled-clamped - 12020-03-01T21:44:29+00:00monthlyhttps://woodworksbyjohn.com/2020/01/21/frame-talk-1/https://woodworksbyjohn.com/wp-content/uploads/2020/01/julian-float-2-1-1.jpgJulian Float -2 - 1Close up of Julian Float-2https://woodworksbyjohn.com/wp-content/uploads/2020/01/julian-float-1-1-1.jpgJulian Float -1 - 1Close up of Julian Float-1https://woodworksbyjohn.com/wp-content/uploads/2020/01/splines-in-progress-1.jpgSplines in Progress - 1Walnut splines Installedhttps://woodworksbyjohn.com/wp-content/uploads/2020/01/julian-float-2-1.jpgJulian Float 2 - 12020-01-22T15:20:21+00:00monthlyhttps://woodworksbyjohn.com/2020/01/04/frame-185-completed-clavos/https://woodworksbyjohn.com/wp-content/uploads/2020/01/alejandro-by-diane-eugster-1-1.jpgAlejandro by Diane Eugster - 1 (1)Alejandro by Diane Eugster. Ebonized Oak frame with Clavoshttps://woodworksbyjohn.com/wp-content/uploads/2020/01/clavos-pre-drill-1.jpgClavos Pre-drill - 1Pre-drilling holeshttps://woodworksbyjohn.com/wp-content/uploads/2020/01/clavos-from-jordan-1.jpgClavos from Jordan - 1Clavos from Jordanhttps://woodworksbyjohn.com/wp-content/uploads/2020/01/ebonizedoakdetail-1.jpgEbonizedOakDetail - 1https://woodworksbyjohn.com/wp-content/uploads/2020/01/clavos-2-1.jpgClavos-2 - 1Installation in frame2020-01-04T22:37:40+00:00monthlyhttps://woodworksbyjohn.com/2019/12/20/mesa-art-center-demonstration-12-7-2019/https://woodworksbyjohn.com/wp-content/uploads/2019/12/mac-box-1-1.jpgMAC box - 1 - 1Over-all viewhttps://woodworksbyjohn.com/wp-content/uploads/2019/12/mac-box-2-1.jpgMAC box - 2 - 1Detail of the lid lifthttps://woodworksbyjohn.com/wp-content/uploads/2019/12/mac-box-2-1-1.jpgMAC box - 2 - 1 (1)Detail of the hinging methodhttps://woodworksbyjohn.com/wp-content/uploads/2019/12/mac-box-4-1.jpgMAC box - 4 - 1Selected this piece for the lid, reminds me of cat eyes!https://woodworksbyjohn.com/wp-content/uploads/2019/12/mac-demo-1.jpgMAC demo - 1Outside demonstration at The Store at Mesa Art Center 2019-12-21T00:03:45+00:00monthlyhttps://woodworksbyjohn.com/2019/12/13/frame-185-ebonized-oak/https://woodworksbyjohn.com/wp-content/uploads/2019/12/img_1430-2.jpgIMG_1430 2Design Sketch #185https://woodworksbyjohn.com/wp-content/uploads/2019/12/glued-clamped-1.jpgGlued-Clamped - 1Completed frame glued and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2019/12/ebonzing-solution-1.jpgEbonzing Solution - 1Vinegar/Steel Wool solution for ebonizinghttps://woodworksbyjohn.com/wp-content/uploads/2019/12/paring-chisel-even-miter-1.jpgParing Chisel-Even Miter - 1https://woodworksbyjohn.com/wp-content/uploads/2019/12/miter-work-1-1.jpgMiter Work - 1 - 1https://woodworksbyjohn.com/wp-content/uploads/2019/12/miter-work-2-1.jpgMiter Work - 2 - 1Offset paring chisel used to even out miter as neededhttps://woodworksbyjohn.com/wp-content/uploads/2019/12/1-422-beads-small-plow-plane-1.jpg1-4 Beads Small Plow Plane - 1Veritas Small Plow plane for beadshttps://woodworksbyjohn.com/wp-content/uploads/2019/12/profile-2c2b0-angle-1.jpgProfile 2° Angle - 1Dado between beads, ready for angled cuthttps://woodworksbyjohn.com/wp-content/uploads/2019/12/alejandro-by-diane-eugster-1.jpgAlejandro by Diane Eugster - 1Alejandro by Diane Eugster2019-12-13T14:17:16+00:00monthlyhttps://woodworksbyjohn.com/2019/11/30/custom-cat-furniture/https://woodworksbyjohn.com/wp-content/uploads/2019/11/img_1397-2.jpgIMG_1397 2Head scratcher -- everything markedhttps://woodworksbyjohn.com/wp-content/uploads/2019/11/expose-plies-1.jpgExpose Plies - 1Top or Bottom with edges exposed and dado cutshttps://woodworksbyjohn.com/wp-content/uploads/2019/11/dryfit-check-square-1.jpgDryFit-Check Square - 1Dry fit and checking for squarehttps://woodworksbyjohn.com/wp-content/uploads/2019/11/hinge1-1.jpgHinge1 - 1Mortises cut for hingeshttps://woodworksbyjohn.com/wp-content/uploads/2019/11/hinge2-1.jpgHinge2 - 1Mortise squared offhttps://woodworksbyjohn.com/wp-content/uploads/2019/11/dado-hinge-1.jpgDado-hinge - 1Screw holes centered in dado for assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2019/11/front-back-dado-1-1.jpgFront-Back Dado-1 - 1First pass for 1 1/2" wide dadohttps://woodworksbyjohn.com/wp-content/uploads/2019/11/front-back-dado-2-1.jpgFront-Back Dado-2 - 1Second pass with spacer against fencehttps://woodworksbyjohn.com/wp-content/uploads/2019/11/planning-1-1.jpgPlanning-1 - 1Scale Model by Dianehttps://woodworksbyjohn.com/wp-content/uploads/2019/11/grainmatch-1.jpgGrainMatch - 1Cabinet complete -- looks just like Dianes model! There will be a step where the model is sitting2019-12-01T02:45:48+00:00monthlyhttps://woodworksbyjohn.com/2019/11/14/sawstop-one-vs-finger-three-stitches-that-is/https://woodworksbyjohn.com/wp-content/uploads/2019/11/longstock-1.jpgLongStock - 1Outboard support and L-fencehttps://woodworksbyjohn.com/wp-content/uploads/2019/11/longstock-2-1.jpgLongStock-2 - 1L-Fence, sliding table, and finger in splint!https://woodworksbyjohn.com/wp-content/uploads/2019/11/grooves-slots-2-1.jpgGrooves-Slots-2 - 1Place Masonite in first slothttps://woodworksbyjohn.com/wp-content/uploads/2019/11/grooves-slots-1-1.jpgGrooves-Slots-1 - 1Pin nail jig to piece and route the slothttps://woodworksbyjohn.com/wp-content/uploads/2019/11/grooves-slots-3-1.jpgGrooves-Slots-3 - 1Pry up jig, pull pins, vacuum, repeat!https://woodworksbyjohn.com/wp-content/uploads/2019/11/grooves-slots-4-1.jpgGrooves-Slots-4 - 1One down and a bunch to go!https://woodworksbyjohn.com/wp-content/uploads/2019/11/catty-wumpus-shot-1.jpgCatty Wumpus Shot! - 1https://woodworksbyjohn.com/wp-content/uploads/2019/11/jig-in-use-1.jpgJig in Use - 1Jig in usehttps://woodworksbyjohn.com/wp-content/uploads/2019/11/jig-1.jpgJig - 1Plans, jig, and some toolshttps://woodworksbyjohn.com/wp-content/uploads/2019/11/sawstop-1.jpgSawStop - 1The Cartridge Works!2023-02-09T22:39:19+00:00monthlyhttps://woodworksbyjohn.com/2019/10/25/new-frame-commission-and-drawing-desk-follow-up/https://woodworksbyjohn.com/wp-content/uploads/2019/10/first-rees-frames-1-1.jpgFirst Rees Frames - 1Three down, five to gohttps://woodworksbyjohn.com/wp-content/uploads/2019/10/removeglue-1.jpgRemoveGlue - 1Once rubbery, scraped offhttps://woodworksbyjohn.com/wp-content/uploads/2019/10/cut-to-length-plus-miter-1.jpgCut to length plus miter - 1Actual pieces cut and marked on endshttps://woodworksbyjohn.com/wp-content/uploads/2019/10/stock-ready-1.jpgStock Ready - 1Ripping and planing to required sizehttps://woodworksbyjohn.com/wp-content/uploads/2019/10/measure-guide-1.jpgMeasure guide - 1Lay-out piece for required sizes https://woodworksbyjohn.com/wp-content/uploads/2019/10/rough-stock-1.jpgRough stock - 18/4 Basswood from Woodworkers Sourcehttps://woodworksbyjohn.com/wp-content/uploads/2019/10/cut-to-lenght-1-1.jpgCut to lenght - 1 (1)Initial "ooze line" after clampinghttps://woodworksbyjohn.com/wp-content/uploads/2019/10/special-3x5-1-1.jpgSpecial 3x5-1 - 1https://woodworksbyjohn.com/wp-content/uploads/2019/10/special-3x5-corner-1.jpgSpecial 3x5 Corner - 1https://woodworksbyjohn.com/wp-content/uploads/2019/10/sophias-drawing-desk-1-1.jpgSophia's Drawing Desk - 1 (1)Sophia's Drawing Desk2019-10-25T14:31:08+00:00monthlyhttps://woodworksbyjohn.com/2019/10/07/drawing-desk-complete/https://woodworksbyjohn.com/wp-content/uploads/2019/10/scan2019-09-14_135011.jpgScan2019-09-14_135011Plan for the deskhttps://woodworksbyjohn.com/wp-content/uploads/2019/10/final-smoothing-1.jpgFinal Smoothing - 1https://woodworksbyjohn.com/wp-content/uploads/2019/10/hardwareinstall-2-1.jpgHardwareInstall - 2 - 1Location inside box, center line markethttps://woodworksbyjohn.com/wp-content/uploads/2019/10/hardwareinstall-3-1.jpgHardwareInstall - 3 - 1Location under lid, center line markedhttps://woodworksbyjohn.com/wp-content/uploads/2019/10/drawing-table-done-1.jpgDrawing Table Done - 1Completed project2019-10-09T12:17:50+00:00monthlyhttps://woodworksbyjohn.com/2019/10/01/modeling-job-new-commission/https://woodworksbyjohn.com/wp-content/uploads/2019/10/drawingdesk-rabbet-1.jpgDrawingDesk-Rabbet - 1Skewed Rabbet Plane cuts shoulder for insidehttps://woodworksbyjohn.com/wp-content/uploads/2019/10/tails1-1.jpgTails1 - 1Waste chiseled out, always start with removing a small chip to clear bevel of chiselhttps://woodworksbyjohn.com/wp-content/uploads/2019/10/pins1-1.jpgPins1 - 1Tails cut, transferred to pin boardhttps://woodworksbyjohn.com/wp-content/uploads/2019/10/pins2-1.jpgPins2 - 1Pin board laid out and cuthttps://woodworksbyjohn.com/wp-content/uploads/2019/10/drawingdesk-beginnings-1.jpgDrawingDesk beginnings - 1Beginning Stageshttps://woodworksbyjohn.com/wp-content/uploads/2019/10/tailscut-1.jpgTailsCut - 1Tails are laid out, sides cut back to backhttps://woodworksbyjohn.com/wp-content/uploads/2019/10/lvsquare-1.jpgLVSquare - 1Checking for squareness with small double squarehttps://woodworksbyjohn.com/wp-content/uploads/2019/10/divinitytattoo-1.jpgDivinityTattoo - 1https://woodworksbyjohn.com/wp-content/uploads/2019/10/divinitytattoo-1-1.jpgDivinityTattoo - 1 (1)https://woodworksbyjohn.com/wp-content/uploads/2019/10/divinitytattoo-1-2.jpgDivinityTattoo - 1 (2)2019-10-02T11:54:56+00:00monthlyhttps://woodworksbyjohn.com/2019/08/27/twisted-feather-carve-sharing-the-process/https://woodworksbyjohn.com/wp-content/uploads/2019/08/feather-waxout-1.jpgFeather WaxOut - 1https://woodworksbyjohn.com/wp-content/uploads/2019/08/feather-samples-1.jpgFeather Samples - 1Literal and Subtly Carved Feathershttps://woodworksbyjohn.com/wp-content/uploads/2019/08/carving-1-1.jpgCarving-1 - 1Incising edges with small #2https://woodworksbyjohn.com/wp-content/uploads/2019/08/carving-2-1.jpgCarving-2 - 1"Pillowing" designhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/lay-out-1.jpgLay-out - 1Locating designhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/profile-1.jpgProfile - 1Profile right off the sawhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/chisels-required-1.jpgChisels Required - 1Annotated Gouge Procedurehttps://woodworksbyjohn.com/wp-content/uploads/2019/08/making-pattern-1.jpgMaking Pattern - 1Plastic Pattern and Samplehttps://woodworksbyjohn.com/wp-content/uploads/2019/08/onecorner-1.jpgOneCorner - 12019-08-27T21:00:03+00:00monthlyhttps://woodworksbyjohn.com/2019/08/21/frame-168-final-work/https://woodworksbyjohn.com/wp-content/uploads/2019/08/gilding-1.jpgGilding - 1Gilding in Progresshttps://woodworksbyjohn.com/wp-content/uploads/2019/08/conceptdrawing-1.jpgConceptDrawing - 1Concept Drawing, Full Sizehttps://woodworksbyjohn.com/wp-content/uploads/2019/08/frame168-complete-1.jpgFrame168 Complete - 1Completed Frame, 12 kt gold leaf2019-08-22T09:04:55+00:00monthlyhttps://woodworksbyjohn.com/2019/08/14/frame-168-trim-and-roof/https://woodworksbyjohn.com/wp-content/uploads/2019/08/roof-assembled-1-1.jpgRoof Assembled - 1Roof Assemebledhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/roof-trim-1-2.jpgRoof Trim - 1Trimming pieces for roofhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/trimwork-putty-1-1.jpgTrimwork putty - 1Glued/pinned then bondo puttyhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/shooting-board-1-1.jpgShooting Board - 1Shooting board, notice shim https://woodworksbyjohn.com/wp-content/uploads/2019/08/mitering-trim-1-1.jpgMitering Trim - 1Tablesaw with pencil to hold molding2019-08-14T14:00:16+00:00monthlyhttps://woodworksbyjohn.com/2019/08/10/frame-168-tabernacle-style/https://woodworksbyjohn.com/wp-content/uploads/2019/08/base-1.jpgBase - 1https://woodworksbyjohn.com/wp-content/uploads/2019/08/roof-1-1.jpgRoof - 1 (1)Inner supports addedhttps://woodworksbyjohn.com/wp-content/uploads/2019/08/assembly-detail-1.jpgAssembly Detail - 1https://woodworksbyjohn.com/wp-content/uploads/2019/08/inner-angle-1.jpgInner Angle - 1Squaring off the radiused corners formed by router bithttps://woodworksbyjohn.com/wp-content/uploads/2019/08/pilasters-1.jpgPilasters - 1https://woodworksbyjohn.com/wp-content/uploads/2019/08/img_1095.jpgIMG_1095Initial full size drawing2019-08-11T15:11:13+00:00monthlyhttps://woodworksbyjohn.com/2019/07/25/making-custom-frames-summarized/https://woodworksbyjohn.com/wp-content/uploads/2019/07/readyshaping-1.jpgReadyShaping - 1Workable lengths, ready for profilinghttps://woodworksbyjohn.com/wp-content/uploads/2019/07/profiletadpole-1.jpgProfile&Tadpole - 1Rabbet cut and coves ready for tadpole sander to clean up router workhttps://woodworksbyjohn.com/wp-content/uploads/2019/07/allmitered-1.jpgAllMitered - 1Miter jig for tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2019/07/coves-1.jpgCoves - 1Coves cuthttps://woodworksbyjohn.com/wp-content/uploads/2019/07/begins-1.jpgBegins - 1Starting point; 4/4 Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2019/07/closedcorner-2-1.jpgClosedCorner 2 - 1Marking and sanding the closed cornerhttps://woodworksbyjohn.com/wp-content/uploads/2019/07/endresult-1.jpgEndResult - 15"x7" finished frame, 4"x6" in the box2019-07-26T00:44:07+00:00monthlyhttps://woodworksbyjohn.com/2019/06/10/new-frames-and-cataract-surgery-in-my-future/https://woodworksbyjohn.com/wp-content/uploads/2019/06/signs-of-spring-detail-1.jpgSigns of Spring - Detail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/signs-of-spring-1.jpgSigns of Spring - 1"Signs of Spring" by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/here-comes-the-sun-1.jpgHere Comes the Sun - 1"Here Comes the Sun" by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/hcts-6-1.jpgHCTS-6 - 16.) Grounding out designhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/hcts-5-1.jpgHCTS-5 - 17.) One corner completehttps://woodworksbyjohn.com/wp-content/uploads/2019/06/hcts-4-1.jpgHCTS-4 - 15.) Gouges 7/20 and 7/14https://woodworksbyjohn.com/wp-content/uploads/2019/06/hcts-3-1.jpgHCTS-3 - 14.) Dividers to step off distance for leaveshttps://woodworksbyjohn.com/wp-content/uploads/2019/06/hcts-2-1.jpgHCTS-2 - 13.) Outline with V-Chiselhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/hcts-1-1.jpgHCTS-1 - 12.) Template for vine2019-06-12T14:51:34+00:00monthlyhttps://woodworksbyjohn.com/2019/06/07/beaded-frame-water-gilding-experiments/https://woodworksbyjohn.com/wp-content/uploads/2019/06/twopart-mldg-1.jpgTwoPart Mldg - 1Molding sample, Veritas small plow plane, and Flamed Oak box.https://woodworksbyjohn.com/wp-content/uploads/2019/06/saguaro-and-sage-1-1-1.jpgSaguaro and Sage-1 - 1 (1)Saguaro & Sage by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/saguaro-and-sage-detail-1.jpgSaguaro and Sage detail - 1Frame and Painting: Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/rabbet-backs-1.jpgRabbet-Backs - 1Rabbet tuned up after cutting on tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/dsc06435.jpgDSC0643523 Karat gold leafhttps://woodworksbyjohn.com/wp-content/uploads/2019/06/cut-1.jpgCut - 1Pieces mitered with jig, weight counterbalances long pieceshttps://woodworksbyjohn.com/wp-content/uploads/2019/06/clamped-1.jpgClamped - 1https://woodworksbyjohn.com/wp-content/uploads/2019/06/clamped-1-1.jpgClamped - 1 (1)Biscuited and clamped together https://woodworksbyjohn.com/wp-content/uploads/2019/06/basecoat-1.jpgbasecoat - 1Tinted Grey Base Coat2019-06-08T02:11:24+00:00monthlyhttps://woodworksbyjohn.com/picture-frame-process/https://woodworksbyjohn.com/wp-content/uploads/2017/05/summer-breeze-1.jpgSummer Breeze - 17.) Painting titled Summer Breeze by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/framedetail-4-1.jpgFrameDetail-4 - 14.) Burnisher/sealer is followed by sizing then laying silver leafhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/framedetail-3-1.jpgFrameDetail-3 - 13.) After all carving is complete, burnisher sealer is applied to framehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/framedetail-2-1.jpgFrameDetail-2 - 12.) Once outline is carved, details are added with transfer paperhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/framedetail-1-1.jpgFrameDetail-1 - 11.) Initial design drawn on framehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/braids-toned-2-1.jpgBraids Toned - 2 - 16.) Silver leaf rubbed back to simulate age and toned downhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/braids-toned-1-1.jpgBraids Toned - 1 - 15.) Various techniques are used to tone initial leafhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/miterjig-1.jpgMiterJig - 1Miter Cutting Jighttps://woodworksbyjohn.com/wp-content/uploads/2017/05/woodworksbyjohn-profile-1.jpgWoodworksbyJohn Profile - 11.) WoodworksbyJohn Profilehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/biscuitjoint-1.jpgBiscuitJoint - 1Biscuit Joint Illustrated2019-05-29T21:03:49+00:00weekly0.6https://woodworksbyjohn.com/2019/05/05/ebony-dowels-sharpening-concerns/https://woodworksbyjohn.com/wp-content/uploads/2019/05/banded-shelves-1.jpgBanded Shelves - 1Banded Shelves for Armoirehttps://woodworksbyjohn.com/wp-content/uploads/2019/05/gaprepair-1.jpgGapRepair - 1Gap repair!!https://woodworksbyjohn.com/wp-content/uploads/2019/05/gap-1.jpgGap - 1Gap on Mk. II Honing Guidehttps://woodworksbyjohn.com/wp-content/uploads/2019/05/dowel-3-1.jpgDowel-3 - 1Pounding through the L-N dowel platehttps://woodworksbyjohn.com/wp-content/uploads/2019/05/dowel-2-1.jpgDowel-2 - 1After cutting the end with the dowel platehttps://woodworksbyjohn.com/wp-content/uploads/2019/05/dowel-1-1.jpgDowel-1 - 1Creating the Octagon in doweling jighttps://woodworksbyjohn.com/wp-content/uploads/2019/05/astheroostercrows-2-1.jpgAsTheRoosterCrows-2 - 1Corner Detail, frame size 18x24https://woodworksbyjohn.com/wp-content/uploads/2019/05/astheroostercrows-1.jpgAsTheRoosterCrows - 1As the Rooster Crows, by Diane Eugster2019-05-06T12:58:53+00:00monthlyhttps://woodworksbyjohn.com/about/https://woodworksbyjohn.com/wp-content/uploads/2013/06/screen-shot-2013-09-04-at-1-53-18-pm.pngScreen Shot 2013-09-04 at 1.53.18 PMhttps://woodworksbyjohn.com/wp-content/uploads/2013/06/atthebench.jpgJohnPaint300https://woodworksbyjohn.com/wp-content/uploads/2013/06/johnpaint300.jpgJohnPaint300https://woodworksbyjohn.com/wp-content/uploads/2013/06/icon.jpgIcon2019-04-27T21:01:45+00:00weekly0.6https://woodworksbyjohn.com/2019/04/19/picture-frames-and-a-doggie-ramp/https://woodworksbyjohn.com/wp-content/uploads/2019/04/trimbevel-3-1.jpgTrimBevel-3 - 1Slowly working to the scribehttps://woodworksbyjohn.com/wp-content/uploads/2019/04/trimbevel-2-1.jpgTrimBevel-2 - 1What needs to be trimmedhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/trimbevel-1.jpgTrimBevel - 1Scribing with paring chiselhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/ramphardware3-1.jpgRampHardware3 - 1Bring on the dog!!https://woodworksbyjohn.com/wp-content/uploads/2019/04/ramphardware2-1.jpgRampHardware2 - 1Support folded downhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/ramphardware1-1.jpgRampHardware1 - 1Ready for actionhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/rampdog2-1.jpgRampDog2 - 1Brandy down!https://woodworksbyjohn.com/wp-content/uploads/2019/04/rampdog1-1.jpgRampDog1 - 1Brandy Up and .......https://woodworksbyjohn.com/wp-content/uploads/2019/04/painting1-1.jpgPainting1 - 1Signs of Spring by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/oilgild-12kt-1.jpgOilGild-12kt - 1Leafing in progress2019-04-19T21:11:16+00:00monthlyhttps://woodworksbyjohn.com/2019/04/09/i-love-the-challenge/https://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-top-open-1.jpgChickering&Sons Box-top open - 1Top view, open, veneer and hingehttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-top-1.jpgChickering&Sons Box-top - 1Top View, closed, note the Ebony pegshttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-panel-1.jpgChickering&Sons Box-Panel - 1Gluing up the panelshttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-open-1.jpgChickering&Sons Box-open - 1Over-all view openhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-hardware2-1.jpgChickering&Sons Box-Hardware2 - 1Inside, note original knobhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-hardware-1.jpgChickering&Sons Box-Hardware - 1Hardware Detailhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-fingerjoints-1.jpgChickering&Sons Box-Fingerjoints - 1Finger-jointing the sideshttps://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-beginnings-1.jpgChickering&Sons Box-Beginnings - 1https://woodworksbyjohn.com/wp-content/uploads/2019/04/chickeringsons-box-1-1.jpgChickering&Sons Box-1 - 1Over-all view closed2019-04-10T01:51:55+00:00monthlyhttps://woodworksbyjohn.com/2019/04/05/what-happened-to-march/https://woodworksbyjohn.com/wp-content/uploads/2019/04/toomuchrub-1.jpgTooMuchRub - 1Carved & gilded corner, too much rub!https://woodworksbyjohn.com/wp-content/uploads/2019/04/madscientist-2-1.jpgMadScientist-2 - 1Mad Scientist-1https://woodworksbyjohn.com/wp-content/uploads/2019/04/madscientist-1.jpgMadScientist - 1Mad Scientist-2https://woodworksbyjohn.com/wp-content/uploads/2019/04/gildpractice-1.jpgGildPractice - 1Initial lay, front is 23kt, back is 12kt goldhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/gessosandingdisclosure-1.jpgGessoSandingDisclosure - 1Disclosure whiting for sandinghttps://woodworksbyjohn.com/wp-content/uploads/2019/04/gessore-cut-1.jpgGessoRe-cut - 1Re-cutting gesso to reveal carveshttps://woodworksbyjohn.com/wp-content/uploads/2019/04/gessocomplete-1.jpgGessoComplete - 1Applying Gessohttps://woodworksbyjohn.com/wp-content/uploads/2019/04/devon-6-1.jpgDevon-6 - 1Corner detailhttps://woodworksbyjohn.com/wp-content/uploads/2019/04/devon-5-1.jpgDevon-5 - 1Completed framehttps://woodworksbyjohn.com/wp-content/uploads/2019/04/devon-4-1.jpgDevon-4 - 1Joined, fine tuning corners2019-04-06T02:13:11+00:00monthlyhttps://woodworksbyjohn.com/2019/03/16/chickering-sons-piano-box/https://woodworksbyjohn.com/wp-content/uploads/2019/03/stanley-140-1.jpgStanley 140 - 1Stanley 140 Trickhttps://woodworksbyjohn.com/wp-content/uploads/2019/03/plowplane-1.jpgPlowPlane - 1Plowing groove for bottomhttps://woodworksbyjohn.com/wp-content/uploads/2019/03/paringdovetail-1.jpgParingDovetail - 1https://woodworksbyjohn.com/wp-content/uploads/2019/03/done-2-1.jpgDone-2 - 1Lid Detailhttps://woodworksbyjohn.com/wp-content/uploads/2019/03/done-1-1.jpgDone-1 - 1Over-all Viewhttps://woodworksbyjohn.com/wp-content/uploads/2019/03/cutlength-1.jpgCutLength - 1Marked for proper grain alignment2019-03-16T18:07:16+00:00monthlyhttps://woodworksbyjohn.com/2019/03/03/tabernacle-frame-157-complete/https://woodworksbyjohn.com/wp-content/uploads/2019/03/taking-shape-1.jpgTaking Shape - 1Almost done!https://woodworksbyjohn.com/wp-content/uploads/2019/03/redundercoat-1-1.jpgRedUndercoat - 1 (1)Red burnisher sealerhttps://woodworksbyjohn.com/wp-content/uploads/2019/03/mitershootingboard-1.jpgMiterShootingBoard - 1Fitting the Friezehttps://woodworksbyjohn.com/wp-content/uploads/2019/03/detail-3-1.jpgDetail-3 - 1Upper right sidehttps://woodworksbyjohn.com/wp-content/uploads/2019/03/detail-2-1.jpgDetail-2 - 1Lower left side and stepshttps://woodworksbyjohn.com/wp-content/uploads/2019/03/detail-1-1.jpgDetail-1 - 1Upper left sidehttps://woodworksbyjohn.com/wp-content/uploads/2019/03/complete-1-1.jpgComplete-1 - 1Over-all Finishhttps://woodworksbyjohn.com/wp-content/uploads/2019/03/complete-w-painting-1.jpgComplete w-Painting - 1Complete with Painting by Julian Mirandahttps://woodworksbyjohn.com/wp-content/uploads/2019/03/complete-hanging-1.jpgComplete Hanging - 1Complete and Hanging2019-03-04T01:49:42+00:00monthlyhttps://woodworksbyjohn.com/2019/02/17/tabernacle-frame-progress-report/https://woodworksbyjohn.com/wp-content/uploads/2019/02/screen-shot-2019-01-16-at-9.11.51-pm.pngScreen Shot 2019-01-16 at 9.11.51 PMEmbossed Molding https://woodworksbyjohn.com/wp-content/uploads/2019/02/tabernacleframe-top-1.jpgTabernacleFrame-top - 1https://woodworksbyjohn.com/wp-content/uploads/2019/02/tabernacleframe-plinth-1.jpgTabernacleFrame-Plinth - 1Plinth blocks installed, tadpole sander to refine column beadshttps://woodworksbyjohn.com/wp-content/uploads/2019/02/tabernacleframe-molding-1.jpgTabernacleFrame-Molding - 1Stepped molding for sight edgehttps://woodworksbyjohn.com/wp-content/uploads/2019/02/tabernacleframe-clamped-1.jpgTabernacleFrame-Clamped - 1Clamped Uphttps://woodworksbyjohn.com/wp-content/uploads/2019/02/tabernacleframe-chamferplinth-1.jpgTabernacleFrame-ChamferPlinth - 1Chamfered plinth blocks2019-02-18T14:29:07+00:00monthlyhttps://woodworksbyjohn.com/2019/02/12/tabernacle-frame-157/https://woodworksbyjohn.com/wp-content/uploads/2019/02/jmsteppedmldg.-scribe-1.jpgJMSteppedMldg. scribe - 12.) Scribing helped set bladehttps://woodworksbyjohn.com/wp-content/uploads/2019/02/jmsteppedmldg-c-1.jpgJMSteppedMldg-c - 15.) Success!https://woodworksbyjohn.com/wp-content/uploads/2019/02/jmsteppedmldg-b-1.jpgJMSteppedMldg-b - 1https://woodworksbyjohn.com/wp-content/uploads/2019/02/jmsteppedmldg-a-1.jpgJMSteppedMldg-a - 14.) Challenge, removing the center safely!https://woodworksbyjohn.com/wp-content/uploads/2019/02/jmsteppedmldg-1.jpgJMSteppedMldg - 11.) Design laid out https://woodworksbyjohn.com/wp-content/uploads/2019/02/jmsteppedmldg-1-1.jpgJMSteppedMldg - 1 (1)3.) Progress being madehttps://woodworksbyjohn.com/wp-content/uploads/2019/02/jmstairs-1.jpgJMStairs - 1Creating the temple stairshttps://woodworksbyjohn.com/wp-content/uploads/2019/02/jmstairdepth-1.jpgJMStairDepth - 19mm block to set depthhttps://woodworksbyjohn.com/wp-content/uploads/2019/02/jmpartscomplete-1.jpgJMPartsComplete - 1Parts ready to go!https://woodworksbyjohn.com/wp-content/uploads/2019/02/jmdrawing-1.jpgJMDrawing - 1Full Size Drawing2019-02-12T23:59:03+00:00monthlyhttps://woodworksbyjohn.com/2019/02/08/picture-frame-time/https://woodworksbyjohn.com/wp-content/uploads/2019/02/stockprofiled-1.jpgstockprofiled - 1Basic Profileshttps://woodworksbyjohn.com/wp-content/uploads/2019/02/routertabledust-1.jpgRouterTableDust - 1Fence for dust control with router edge work.https://woodworksbyjohn.com/wp-content/uploads/2019/02/dustcollector-6-1.jpgDustCollector-6 - 15.) View from back, Fein hose attachedhttps://woodworksbyjohn.com/wp-content/uploads/2019/02/dustcollector-5-1.jpgDustCollector-5 - 14.) Mounted under out feed table, front viewhttps://woodworksbyjohn.com/wp-content/uploads/2019/02/dustcollector-4-1.jpgDustCollector-4 - 16.) View from bottom, picture frame clips secure ithttps://woodworksbyjohn.com/wp-content/uploads/2019/02/dustcollector-3-1.jpgDustCollector-3 - 13.) Elbow attached to bottom and box cut to allow adjusting the routerhttps://woodworksbyjohn.com/wp-content/uploads/2019/02/dustcollector-2-1.jpgDustCollector-2 - 12.) Hole to fit routerhttps://woodworksbyjohn.com/wp-content/uploads/2019/02/dustcollector-1-1.jpgDustCollector-1 - 11.) Cheap Rubbermaid Containerhttps://woodworksbyjohn.com/wp-content/uploads/2019/02/backs-1.jpgBacks - 1Ready for Finishinghttps://woodworksbyjohn.com/wp-content/uploads/2019/02/addedstop-1.jpgAddedStop - 1Adjustable stop for small moldings2019-02-08T20:18:55+00:00monthlyhttps://woodworksbyjohn.com/2019/01/18/gallery-news-and-third-frame/https://woodworksbyjohn.com/wp-content/uploads/2019/01/parts-is-parts-1.jpgparts is parts - 1Parts is Parts!https://woodworksbyjohn.com/wp-content/uploads/2019/01/mitering-1.jpgmitering - 11.) Frame pieces miteredhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/finetune-rabbet-outerband-1.jpgfinetune rabbet & outerband - 13.) Tongue fine tuned, outer band miteredhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/cornerdetail-1-1.jpgcornerdetail - 1 (1)Corner detail https://woodworksbyjohn.com/wp-content/uploads/2019/01/complete-1-1.jpgcomplete - 1Over-all viewhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/beadingframe-1-1.jpgbeadingframe-1 - 1Cutting beads, tricky on thin edge like thishttps://woodworksbyjohn.com/wp-content/uploads/2019/01/beadingframe-1.jpgbeadingframe - 1Setting in the beadhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/assembled-1.jpgassembled - 12.) Panel assembledhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/assembled-1-1.jpgassembled - 1 (1)4.) Final assembly2019-01-19T00:02:16+00:00monthlyhttps://woodworksbyjohn.com/2019/01/12/2019-cowgirl-up-show-3-frames/https://woodworksbyjohn.com/wp-content/uploads/2019/01/olivecarve-1.jpgolivecarve - 1Olive Carvinghttps://woodworksbyjohn.com/wp-content/uploads/2019/01/frames-5-1.jpgframes-5 - 1Frames assembled and glued, dry overnighthttps://woodworksbyjohn.com/wp-content/uploads/2019/01/frames-4-1.jpgframes-4 - 1Frame members ready for assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/frames-3-1.jpgframes-3 - 1Refining profile and edgeshttps://woodworksbyjohn.com/wp-content/uploads/2019/01/frames-2-1.jpgframes-2 - 1Profiled and ready https://woodworksbyjohn.com/wp-content/uploads/2019/01/frames-1-1.jpgframes-1 - 1Cut to workable lengthhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/cornerdetail-1.jpgcornerdetail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2019/01/complete-1.jpgcomplete - 1Completed 18" x 24" framehttps://woodworksbyjohn.com/wp-content/uploads/2019/01/carve-12-1.jpgcarve-12 - 1Initial cuts for each leaf, notice my "cheat sheet"https://woodworksbyjohn.com/wp-content/uploads/2019/01/carve-4-1.jpgcarve-4 - 1Lightly sanded and ready for final inspection!2019-01-13T02:45:59+00:00monthlyhttps://woodworksbyjohn.com/2019/01/08/gilding-in-seattle/https://woodworksbyjohn.com/wp-content/uploads/2019/01/gilding-in-progress-horse-1.jpggilding in progress horse - 1Leaf laying in progress, note the gilders tiphttps://woodworksbyjohn.com/wp-content/uploads/2019/01/gilded-horse-2-1.jpggilded horse 2 - 1https://woodworksbyjohn.com/wp-content/uploads/2019/01/gilded-horse-1-1.jpggilded horse 1 - 1Burnished and almost done https://woodworksbyjohn.com/wp-content/uploads/2019/01/gessoed-horse-1.jpggessoed horse - 1Gessoed Horsehttps://woodworksbyjohn.com/wp-content/uploads/2019/01/black-bole-horse-1.jpgblack bole horse - 1Horse with black clay/bole2019-01-09T11:01:36+00:00monthlyhttps://woodworksbyjohn.com/2018/12/21/from-gilt-to-black-frame-do-over/https://woodworksbyjohn.com/wp-content/uploads/2018/12/Song-of-the-Sparrow-detail-1.jpgSong of the Sparrow - detail - 1Corner Detail with Song of the Sparrowhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/S-of-the-S-1.jpgS of the S - 1Song of the Sparrow Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Corner-Red-Clay-1.jpgCorner Red Clay - 1Red burnisher/sealer clayhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Corner-Japan-Black-1.jpgCorner Japan Black - 1Japan Blackhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Corner-gilded-1.jpgCorner gilded - 1Original gilded finishhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Corner-Do-Over-1.jpgCorner Do-Over - 1Final Frame2018-12-21T15:25:21+00:00monthlyhttps://woodworksbyjohn.com/2018/12/15/tabernacle-frame-done-final-details/https://woodworksbyjohn.com/wp-content/uploads/2018/12/Spandrel-In-1.jpgSpandrel In - 1Spandrel installed with framers pointshttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Spacers1-222reveal-1.jpgSpacers1-2reveal - 1Spacers to establish revealhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/UpperRight-1.jpgUpperRight - 1Upper right cornerhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/UpperLeft-1.jpgUpperLeft - 1Upper left cornerhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Tabernacle-w-Painting-1.jpgTabernacle w-Painting - 1https://woodworksbyjohn.com/wp-content/uploads/2018/12/Screen-Shot-2018-12-13-at-10.32.36-PM.pngScreen Shot 2018-12-13 at 10.32.36 PMArtist & Paintinghttps://woodworksbyjohn.com/wp-content/uploads/2018/12/Overall-1.jpgOverall - 1Over-all viewhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/LowerRight-1.jpgLowerRight - 1Lower right cornerhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/LowerLeft-1.jpgLowerLeft - 1Lower left cornerhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/IMG_2167.jpegIMG_2167Framer & Frame2018-12-16T00:30:59+00:00monthlyhttps://woodworksbyjohn.com/2018/12/12/frame-147-double-floater-effect/https://woodworksbyjohn.com/wp-content/uploads/2018/12/screen-shot-2018-12-11-at-5-21-12-pm.jpgScreen Shot 2018-12-11 at 5.21.12 PMGlued & Clamped https://woodworksbyjohn.com/wp-content/uploads/2018/12/reesframe-1.jpgReesFrame - 1Ready for Deliveryhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/rees-corner-sample-1.jpgRees Corner Sample - 1Corner Sample, Double Float Effecthttps://woodworksbyjohn.com/wp-content/uploads/2018/12/gusset-5-1.jpgGusset-5 - 15.) Clamped and glued overnighthttps://woodworksbyjohn.com/wp-content/uploads/2018/12/gusset-4-1.jpgGusset-4 - 14.) Hardboard aka Masonite, trimmed to fit rabbethttps://woodworksbyjohn.com/wp-content/uploads/2018/12/gusset-3-1.jpgGusset-3 - 13.) Corners squared and scribed for rabbethttps://woodworksbyjohn.com/wp-content/uploads/2018/12/gusset-2-1.jpgGusset-2 - 12.) Plunge cut with mortising bithttps://woodworksbyjohn.com/wp-content/uploads/2018/12/gusset-1-1.jpgGusset-1 - 11.) Jig clamped onto corner for routing2018-12-15T19:35:24+00:00monthlyhttps://woodworksbyjohn.com/2018/12/02/tabernacle-frame-148/https://woodworksbyjohn.com/wp-content/uploads/2018/12/topcapscrews-1.jpgTopCapScrews - 1Top piece https://woodworksbyjohn.com/wp-content/uploads/2018/12/spandrelfit-1.jpgSpandrelFit - 1Spandrelhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/scribedentil-1.jpgScribeDentil - 1Dentil molding fittedhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/roughprep-1.jpgRoughPrep - 1Scrub Planehttps://woodworksbyjohn.com/wp-content/uploads/2018/12/mortisedepth-1.jpgMortiseDepth - 1Mortiser, note gauge block for depthhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/haunchedtenon-1.jpgHaunchedTenon - 1Fitting haunched mortise and tenon jointhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/glueup-1.jpgGlueUp - 1Glued and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/frameassembled-1.jpgFrameAssembled - 1https://woodworksbyjohn.com/wp-content/uploads/2018/12/flushdentil-1.jpgFlushDentil - 1Dentil molding pared to match columnhttps://woodworksbyjohn.com/wp-content/uploads/2018/12/bottompiecescrewed-1.jpgBottomPieceScrewed - 1Bottom banding2018-12-03T00:38:00+00:00monthlyhttps://woodworksbyjohn.com/2018/11/19/tabernacle-frame-commission/https://woodworksbyjohn.com/wp-content/uploads/2018/11/spandrelsides-1.jpgSpandrelSides - 1Sides with edge guidehttps://woodworksbyjohn.com/wp-content/uploads/2018/11/spandrelcomplete-1.jpgSpandrelComplete - 1Completed Spandrel https://woodworksbyjohn.com/wp-content/uploads/2018/11/spandrelarch-1.jpgSpandrelArch - 1Top of Arch with compass armhttps://woodworksbyjohn.com/wp-content/uploads/2018/11/painting-1.jpgPainting - 1I/4 Scale Concepthttps://woodworksbyjohn.com/wp-content/uploads/2018/11/design1-1.jpgDesign1 - 1Full Size Mock-Uphttps://woodworksbyjohn.com/wp-content/uploads/2018/11/arch3-1.jpgArch3 - 1Arch #1https://woodworksbyjohn.com/wp-content/uploads/2018/11/arch2-1.jpgArch2 - 1Arch #2https://woodworksbyjohn.com/wp-content/uploads/2018/11/arch1-1.jpgArch1 - 1Arch #32018-11-20T03:17:04+00:00monthlyhttps://woodworksbyjohn.com/2018/11/02/carved-tulip-cross/https://woodworksbyjohn.com/wp-content/uploads/2018/11/lapjoints-1.jpgLapJoints - 1Cutting Lap Jointhttps://woodworksbyjohn.com/wp-content/uploads/2018/11/cross-2-1.jpgCross - 2 - 1Cross #2https://woodworksbyjohn.com/wp-content/uploads/2018/11/cross-1-1.jpgCross - 1 - 1Cross #1https://woodworksbyjohn.com/wp-content/uploads/2018/11/cherry-procedure-1.jpgCherry Procedure - 1T-shaped Cherry with motif roughed outhttps://woodworksbyjohn.com/wp-content/uploads/2018/11/basswood-problem-1-e1541210532361.jpgBasswood Problem - 1Basswood being uncooperative!2018-11-03T02:23:34+00:00monthlyhttps://woodworksbyjohn.com/2018/10/28/october-was-an-exciting-month/https://woodworksbyjohn.com/wp-content/uploads/2018/10/diane-eugster-potion-1.jpgDiane Eugster- Potion - 1Potion by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2018/10/diane-eugster-living-water-1.jpgDiane Eugster- Living Water - 1Living Water by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2018/10/diane-eugster-whispers-and-water-1.jpgDiane Eugster- Whispers and Water - 1Whispers and Water by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2018/10/diane-eugster-half-full-1.jpgDiane Eugster- Half Full - 1Half Full by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2018/10/anticus-gallery-1.jpgAnticus Gallery - 1Kumiko Sofa Table at Anticus Gallery, Scottsdalehttps://woodworksbyjohn.com/wp-content/uploads/2018/10/phoenix-hg-1.jpgPhoenix HG - 12018-10-29T15:22:49+00:00monthlyhttps://woodworksbyjohn.com/2018/09/25/september-wrap-up-new-kumiko-box/https://woodworksbyjohn.com/wp-content/uploads/2018/09/rip-10-20-1.jpgRip 10-20 - 110/20 Rip profilehttps://woodworksbyjohn.com/wp-content/uploads/2018/09/christinevallieres-1.jpgChristineVallieres - 1Completed Frame with Christine Vallieres paintinghttps://woodworksbyjohn.com/wp-content/uploads/2018/09/west-north-1.jpgWest-North - 1West/North Wallhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/north-east-1.jpgNorth-East - 1North/East Wallhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/lid-2-1.jpgLid-2 - 1Lid glued up and readyhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/lid-1-1.jpgLid-1 - 1Lid complete, biscuits need to be trimmedhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/lid-planning-1.jpgLid Planning - 1Kumiko Lid Designhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/done-1.jpgDone - 1Rail and Pegshttps://woodworksbyjohn.com/wp-content/uploads/2018/09/boxbeginning-1.jpgBoxBeginning - 1Planning how to mill 8/4 Sapele2018-09-25T23:43:22+00:00monthlyhttps://woodworksbyjohn.com/2018/09/01/sofa-table-finished-next/https://woodworksbyjohn.com/wp-content/uploads/2018/09/scribe-4-1.jpgScribe-4 - 1Removed https://woodworksbyjohn.com/wp-content/uploads/2018/09/scribe-3-1.jpgScribe-3 - 1Cut on lap jighttps://woodworksbyjohn.com/wp-content/uploads/2018/09/scribe-2-1.jpgScribe-2 - 1Side to cut markedhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/scribe-1-1.jpgScribe-1 - 1Scribedhttps://woodworksbyjohn.com/wp-content/uploads/2018/09/kumikocloseup-1.jpgKumikoCloseUp - 1Kumiko under glasshttps://woodworksbyjohn.com/wp-content/uploads/2018/09/float-top-1.jpgFloat Top - 1Template for top/apron fitting2018-09-02T23:44:03+00:00monthlyhttps://woodworksbyjohn.com/2018/08/25/kumiko-table-progress/https://woodworksbyjohn.com/wp-content/uploads/2018/08/tablefirstlook-woodworksbyjohn-1.jpgTableFirstLook WoodworksbyJohn - 1Table with Floating Top & Shoji portion of Kumiko https://woodworksbyjohn.com/wp-content/uploads/2018/08/lengthtrick-3-1.jpgLengthTrick-3 - 1Shimmed and Cuthttps://woodworksbyjohn.com/wp-content/uploads/2018/08/lengthtrick-1-1.jpgLengthTrick-1 - 1Feeler Gauge and Parthttps://woodworksbyjohn.com/wp-content/uploads/2018/08/endoftheday-1.jpgEndoftheDay - 1Inset done, still need to scribe the rim pieceshttps://woodworksbyjohn.com/wp-content/uploads/2018/08/67-5-22-5-1.jpg67.5-22.5 - 1One jig for 67.5° the other for 22.5°2019-02-05T14:23:21+00:00monthlyhttps://woodworksbyjohn.com/2018/08/21/sofa-table-with-kumiko-starting-point/https://woodworksbyjohn.com/wp-content/uploads/2018/08/offset-tenons-1.jpgOffset Tenons - 1Offset Tenons with full length haunch https://woodworksbyjohn.com/wp-content/uploads/2018/08/legprogression-1.jpglegprogression - 1Progression of workhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/legdesign-1.jpgLegDesign - 1Checking out pattern vs. leghttps://woodworksbyjohn.com/wp-content/uploads/2018/08/blockplanecurve-1.jpgBlockPlaneCurve - 1Block plane to fair curvehttps://woodworksbyjohn.com/wp-content/uploads/2018/08/trim-edge-piece-1.jpgTrim Edge Piece - 1Removing rabbet at jointhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/oldschool-planning-1.jpgOldSchool Planning - 1Old School Planning, full size on craft paperhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/kumikogrid-1.jpgKumikoGrid - 1Beginning the Gridhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/gluedup-1.jpgGluedUp - 1Glued up and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/checksquare-1.jpgCheckSquare - 1Squaring mortise/tenon areahttps://woodworksbyjohn.com/wp-content/uploads/2018/08/beveled-1.jpgBeveled - 1Cutting bevel on underside 2018-08-22T00:04:33+00:00monthlyhttps://woodworksbyjohn.com/2018/08/15/latest-frame-commission-and-box-done/https://woodworksbyjohn.com/wp-content/uploads/2018/08/walnutbox-2-1.jpgWalnutBox-2 - 1Open box, tray is removablehttps://woodworksbyjohn.com/wp-content/uploads/2018/08/walnutbox-1-1.jpgWalnutBox-1 - 1Walnut, dovetailed with angular sideshttps://woodworksbyjohn.com/wp-content/uploads/2018/08/tray-2-1.jpgTray-2 - 1Tablesaw for cutting mitershttps://woodworksbyjohn.com/wp-content/uploads/2018/08/tray-1-1.jpgTray-1 - 1Plowing in the groovehttps://woodworksbyjohn.com/wp-content/uploads/2018/08/lidlift-2-1.jpgLidLift-2 - 1Not quite perfect but acceptable!https://woodworksbyjohn.com/wp-content/uploads/2018/08/lidlift-1-1.jpgLidLift-1 - 1Ready to fit the lid lifthttps://woodworksbyjohn.com/wp-content/uploads/2018/08/finalfitting-1.jpgFinalFitting - 11/3 and 2/3 cut for locking piecehttps://woodworksbyjohn.com/wp-content/uploads/2018/08/finalfit-1.jpgFinalFit - 1Trimming the "rim"https://woodworksbyjohn.com/wp-content/uploads/2018/08/rosalieframe-5-1.jpgRosalieFrame-5 - 1Clamped and Gluedhttps://woodworksbyjohn.com/wp-content/uploads/2018/08/rosalieframe-2-1.jpgRosalieFrame-2 - 1Second cut2018-08-15T15:43:20+00:00monthlyhttps://woodworksbyjohn.com/2018/07/27/kumiko-box-2/https://woodworksbyjohn.com/wp-content/uploads/2018/07/lid-to-be-1.jpgLid to be - 1Lid looking for a Box!https://woodworksbyjohn.com/wp-content/uploads/2018/07/prep-3-1.jpgPrep-3 - 1Picture #3: Thicknessinghttps://woodworksbyjohn.com/wp-content/uploads/2018/07/prep-2-1.jpgPrep-2 - 1Picture #2: Bandsawhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/prep-1-1.jpgPrep-1 - 1Picture #1: Working Edgehttps://woodworksbyjohn.com/wp-content/uploads/2018/07/overviewlapjoint-1.jpgOverviewLapJoint - 1Over view of jig and toolshttps://woodworksbyjohn.com/wp-content/uploads/2018/07/lapjoint-3-1.jpgLapJoint-3 - 1Remove waste with chiselhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/lapjoint-2-1.jpgLapJoint-2 - 1Scribe and cuthttps://woodworksbyjohn.com/wp-content/uploads/2018/07/lapjoint-1-1.jpgLapJoint-1 - 1Mark thickness after first cuthttps://woodworksbyjohn.com/wp-content/uploads/2018/07/design-calculations-1.jpgDesign Calculations - 1Mind Numbing!https://woodworksbyjohn.com/wp-content/uploads/2018/07/cuttosize-finetune-1.jpgCuttoSize finetune - 1Fine Tuning of Shooting Board2018-07-27T23:09:24+00:00monthlyhttps://woodworksbyjohn.com/2018/07/17/hand-carved-picture-frames-my-process/https://woodworksbyjohn.com/wp-content/uploads/2018/07/pattern-2-11.jpgPattern-2 - 1Tracing Paper aka Carbon Paperhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/pattern-3-1.jpgPattern-3 - 1Reference for sweeps & sizeshttps://woodworksbyjohn.com/wp-content/uploads/2018/07/pattern-1-1.jpgPattern-1 - 1Plastic Patternhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/freamoutline-vein-1.jpgFreamOutline-Vein - 1Work in Progresshttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dreaminginblue-1-1.jpgDreaminginBlue-1 - 1Pattern Workhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dreaming-in-blue-corner-detail-1.jpgDreaming in Blue Corner Detail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dreaming-in-blue-1.jpgDreaming in Blue - 1Dreaming In Blue Diane Eugster 18 x 24https://woodworksbyjohn.com/wp-content/uploads/2018/07/carveroffice-1.jpgCarverOffice - 12018-07-18T22:54:53+00:00monthlyhttps://woodworksbyjohn.com/2018/07/14/first-kumiko-box/https://woodworksbyjohn.com/wp-content/uploads/2018/07/planes-1.jpgPlanes - 1Preparing the Sideshttps://woodworksbyjohn.com/wp-content/uploads/2018/07/planedchamfer-1.jpgPlanedChamfer - 1Chamfering the top edgehttps://woodworksbyjohn.com/wp-content/uploads/2018/07/lidmortise-1.jpgLidMortise - 1Mortising in a Piano keyhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dovetails3-1.jpgDovetails3 - 1Trimming tails to match covehttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dovetails2-1.jpgDovetails2 - 1Fit in placehttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dovetails1-1.jpgDovetails1 - 1Chopping out the pinboardhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/cherry-kumiko-box3-1.jpgCherry Kumiko Box3 - 1Side view, grain detail!https://woodworksbyjohn.com/wp-content/uploads/2018/07/cherry-kumiko-box2-1.jpgCherry Kumiko Box2 - 1Openhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/cherry-kumiko-box1-1.jpgCherry Kumiko Box1 - 1Closedhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/cherry-kumiko-box-cove-1.jpgCherry Kumiko Box Cove - 1Preparing Sides, Note eraser for sanding block and Kumiko panel2018-07-16T21:19:19+00:00monthlyhttps://woodworksbyjohn.com/2018/07/03/june-frame-projects/https://woodworksbyjohn.com/wp-content/uploads/2018/07/victoriaprofile-woodworksbyjohn-1.jpgVictoriaProfile-WoodworksbyJohn - 1Custom Framehttps://woodworksbyjohn.com/wp-content/uploads/2018/07/reescorner2-1.jpgReesCorner2 - 1Fine Tuning the Miterhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/rees4-1.jpgRees4 - 1Finished with Satin Blackhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/rees3-1.jpgRees3 - 1Five Frames Sealedhttps://woodworksbyjohn.com/wp-content/uploads/2018/07/dreamingbluesample-1.jpgdreamingbluesample - 1Corner Sample for next framehttps://woodworksbyjohn.com/wp-content/uploads/2018/07/burnishersanded-1.jpgBurnisherSanded - 1Sanding the Sealer2018-07-03T20:46:22+00:00monthlyhttps://woodworksbyjohn.com/2018/06/24/custom-picture-frames/https://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-7-1.jpgReesFrames-7 - 1Two down, three to go!https://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-6-1.jpgReesFrames-6 - 1Carefully aligning the biscuithttps://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-5-1.jpgReesFrames-5 - 1All cut and labeled -- could get confused!https://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-4-1.jpgReesFrames-4 - 1Miter Sledhttps://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-3-1.jpgReesFrames-3 - 1Dado head to cut rabbethttps://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-2-1.jpgReesFrames-2 - 1Plane working edge, rip, repeathttps://woodworksbyjohn.com/wp-content/uploads/2018/06/reesframes-1-1.jpgReesFrames-1 - 1My 220volt apprentice to bring to a uniform 1 1/2" thickness2018-06-24T13:56:28+00:00monthlyhttps://woodworksbyjohn.com/2018/06/04/journey-down-the-kumiko-rabbit-hole-continues/https://woodworksbyjohn.com/wp-content/uploads/2018/06/wings-locked-1.jpgWings Locked - 1Hinge Piecehttps://woodworksbyjohn.com/wp-content/uploads/2018/06/wings-setup-1.jpgWings Setup - 1Cutting the Hinge Pieceshttps://woodworksbyjohn.com/wp-content/uploads/2018/06/setting-length-3-1.jpgSetting Length-3 - 1Chisel to cut anglehttps://woodworksbyjohn.com/wp-content/uploads/2018/06/setting-length-2-1.jpgSetting Length-2 - 1Placed in jig and set to scribed linehttps://woodworksbyjohn.com/wp-content/uploads/2018/06/setting-length-1-1.jpgSetting Length-1 - 1Marking gauge to scribe https://woodworksbyjohn.com/wp-content/uploads/2018/06/first-asa-no-ha-1.jpgFirst Asa-no-ha - 1First Asa-No-Ha2022-03-27T02:21:37+00:00monthlyhttps://woodworksbyjohn.com/2018/05/28/kumiko-or-down-the-rabbit-hole/https://woodworksbyjohn.com/wp-content/uploads/2018/05/lapjoint-2-1.jpgLapJoint-2 - 1Lap Joints Assembledhttps://woodworksbyjohn.com/wp-content/uploads/2018/05/lapjoint-1-1.jpgLapJoint-1 - 1Lap Joints Cuthttps://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-4-1.jpgKukimo-4 - 13/16" plus 1/128 -- no problem!https://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-3-1.jpgKukimo-3 - 1Use thickness jig and smooth planehttps://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-2-1.jpgKukimo-2 - 1Cut strip slightly over-sized on bandsawhttps://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-1-1.jpgKukimo-1 - 1Plane a working edgehttps://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-thickness-jig-1.jpgKukimo Thickness Jig - 1Thickness Jighttps://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-lapjoint-jig-1.jpgKukimo LapJoint Jig - 1Lap Joint Cutting Jighttps://woodworksbyjohn.com/wp-content/uploads/2018/05/kukimo-angle-jigs-1.jpgKukimo Angle Jigs - 1Angle Jigs2018-05-29T01:39:57+00:00monthlyhttps://woodworksbyjohn.com/2018/05/17/10-board-feet-5-5-hours/https://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-profile2-1.jpgWoodworksbyJohn-Profile2 - 1https://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-step5-1.jpgWoodworksbyJohn-Step5 - 1Frame parts glued and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-step4-1.jpgWoodworksbyJohn-Step4 - 1Grooved and ready for glue-uphttps://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-step3-1.jpgWoodworksbyJohn-Step3 - 1Cutting the beadshttps://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-step2-1.jpgWoodworksbyJohn-Step2 - 1Planed edges then ripped to widthhttps://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-step1-1.jpgWoodworksbyJohn-Step1 - 1Cut to approximate lengthhttps://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-profile-1.jpgWoodworksbyJohn-Profile - 1Profilehttps://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-assembled2-1.jpgWoodworksbyJohn-Assembled2 - 1Mitering to the required length https://woodworksbyjohn.com/wp-content/uploads/2018/05/woodworksbyjohn-assembled-1.jpgWoodworksbyJohn-Assembled - 1Assembled Frames2018-05-18T00:22:51+00:00monthlyhttps://woodworksbyjohn.com/2017/07/13/keepsake-box-final-details/https://woodworksbyjohn.com/wp-content/uploads/2017/07/opentray-1.jpgopentray - 1Box open with Trayhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/inside-1.jpginside - 1Inside, lined with Burgundy velvethttps://woodworksbyjohn.com/wp-content/uploads/2017/07/frontview-1.jpgfrontview - 1Front Viewhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/backview-1.jpgbackview - 1Back View2018-05-02T01:52:08+00:00monthlyhttps://woodworksbyjohn.com/2018/04/29/hand-cut-finger-joints-reclaimed-wood/https://woodworksbyjohn.com/wp-content/uploads/2018/04/boxes-1-11.jpgBoxes-1 - 1Rustic pencil boxeshttps://woodworksbyjohn.com/wp-content/uploads/2018/04/plowplane-1.jpgPlowPlane - 1Veritas Small Plough Planehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/fj-4-1.jpgFJ-4 - 1Left is results of this method, right shows nasty shoulder!https://woodworksbyjohn.com/wp-content/uploads/2018/04/fj-3-1.jpgFJ-3 - 1Flip board over, remove rest of wastehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/fj-2-1.jpgFJ-2 - 1Cut about half way, leave end completehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/fj-1-1.jpgFJ-1 - 1Initial notch https://woodworksbyjohn.com/wp-content/uploads/2018/04/boxes-2-1.jpgBoxes-2 - 1Lids opened, note that knothole!https://woodworksbyjohn.com/wp-content/uploads/2018/04/boxes-1-1.jpgBoxes-1 - 1https://woodworksbyjohn.com/wp-content/uploads/2018/04/bathroom2-1.jpgBathroom2 - 1Bathroom Alcovehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/bathroom1-1.jpgBathroom1 - 1Fence Board Mirror2018-04-29T23:59:35+00:00monthlyhttps://woodworksbyjohn.com/2018/04/19/christine-profile-picture-frames-take-two/https://woodworksbyjohn.com/wp-content/uploads/2018/04/production-1.jpgProduction - 1Semi-Production Modehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/japanblack4-1.jpgJapanBlack4 - 1Final work waxed with scrubbyhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/japanblack3-1.jpgJapanBlack3 - 1Rubbed back, some turpentine & steel woolhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/japanblack2-1-1.jpgJapanBlack2 - 1 (1)A litte bit morehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/japanblack1-1.jpgJapanBlack1 - 1Another examplehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/burnisher-sealer-1-2-1.jpgburnisher-sealer 1-2 - 1Burnisher/Sealer with half of the frame burnished.https://woodworksbyjohn.com/wp-content/uploads/2018/04/biscuits-1.jpgBiscuits - 1Compressing Biscuits2018-04-20T00:07:31+00:00monthlyhttps://woodworksbyjohn.com/2018/04/08/artists-taboret-complete/https://woodworksbyjohn.com/wp-content/uploads/2018/04/frontview-11.jpgFrontView - 1Tablet/iPad Shelfhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/ipad-arm-1.jpgiPad Arm - 1Detail of Tablet/iPad Shelfhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/smalltubes-1.jpgSmallTubes - 1Small Paint Tubeshttps://woodworksbyjohn.com/wp-content/uploads/2018/04/palette-pencil-1.jpgPalette-Pencil - 1Palette Keeper Space and Trayhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/large-small-tubes-1.jpgLarge-Small tubes - 1Small and Large Paint Tubeshttps://woodworksbyjohn.com/wp-content/uploads/2018/04/frontview-1.jpgFrontView - 1Over-all Front Viewhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/brushdrawer-1.jpgBrushDrawer - 1Brush Storagehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/bottomdrawers-1.jpgBottomDrawers - 1Lower Drawershttps://woodworksbyjohn.com/wp-content/uploads/2018/04/sidedetail-1.jpgSideDetail - 1Side Viewhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/rearview-1.jpgRearView - 1Back View2018-04-09T00:13:15+00:00monthlyhttps://woodworksbyjohn.com/2018/04/02/artist-taboret-carcass-and-drawers/https://woodworksbyjohn.com/wp-content/uploads/2018/04/tablesaw-with-dado-1.jpgTablesaw with Dado - 1Dado head in saw, sacrificial fencehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/drawer-joinery-1.jpgDrawer Joinery - 1https://woodworksbyjohn.com/wp-content/uploads/2018/04/trial-joint-1.jpgTrial Joint - 1Trial jointhttps://woodworksbyjohn.com/wp-content/uploads/2018/04/resawing-beech-1.jpgResawing Beech - 1Resawing Birch to 1/2" thicknesshttps://woodworksbyjohn.com/wp-content/uploads/2018/04/industrial-chic-1.jpgIndustrial Chic - 1Industrial Chichttps://woodworksbyjohn.com/wp-content/uploads/2018/04/drawer-parts-ready-1.jpgDrawer Parts Ready - 1Tongues, dados, and bottom grooveshttps://woodworksbyjohn.com/wp-content/uploads/2018/04/drawer-finetuning-1.jpgDrawer Finetuning - 1Fine tuning larger sideshttps://woodworksbyjohn.com/wp-content/uploads/2018/04/drawer-dividers-1.jpgDrawer Dividers - 1https://woodworksbyjohn.com/wp-content/uploads/2018/04/drawer-assembly-1.jpgDrawer Assembly - 1Glue and brads to assemblehttps://woodworksbyjohn.com/wp-content/uploads/2018/04/dado-rabbet-1.jpgDado-Rabbet - 1Tongue & Groove Detail2018-04-05T08:25:37+00:00monthlyhttps://woodworksbyjohn.com/2018/03/21/gilded-floater-frame-in-progress/https://woodworksbyjohn.com/wp-content/uploads/2018/03/scrubplane-2-1.jpgScrubPlane-2 - 1Straight edge shows progresshttps://woodworksbyjohn.com/wp-content/uploads/2018/03/scrubplane-1-1.jpgScrubPlane-1 - 1Crossgrain to level edgeshttps://woodworksbyjohn.com/wp-content/uploads/2018/03/plowplane-1.jpgPlowPlane - 1Plowing the Grooveshttps://woodworksbyjohn.com/wp-content/uploads/2018/03/jointerplane-1.jpgJointerPlane - 1Planing the Working Edgehttps://woodworksbyjohn.com/wp-content/uploads/2018/03/glued-1.jpgGlued - 1Clamped and left overnighthttps://woodworksbyjohn.com/wp-content/uploads/2018/03/blockplane-1.jpgBlockPlane - 1Planing the chamfer2018-03-21T19:04:19+00:00monthlyhttps://woodworksbyjohn.com/2018/03/19/celtic-clover-study/https://woodworksbyjohn.com/wp-content/uploads/2018/03/celticclover-vtool-1.jpgCelticClover-Vtool - 1https://woodworksbyjohn.com/wp-content/uploads/2018/03/celticclover-transfer-1.jpgCelticClover-Transfer - 1Transfer of Designhttps://woodworksbyjohn.com/wp-content/uploads/2018/03/celticclover-over-under-1.jpgCelticClover-Over-under - 1https://woodworksbyjohn.com/wp-content/uploads/2018/03/celticclover-over-shellac-1.jpgCelticClover-Over-Shellac - 1Shellac Onlyhttps://woodworksbyjohn.com/wp-content/uploads/2018/03/celticclover-background-1.jpgCelticClover-Background - 1Background Completehttps://woodworksbyjohn.com/wp-content/uploads/2018/03/celticclover-antiqued-1.jpgCelticClover-Antiqued - 1Min-Wax Gel Stain2018-03-19T14:19:19+00:00monthlyhttps://woodworksbyjohn.com/2018/03/07/mesa-art-center-co-op/https://woodworksbyjohn.com/wp-content/uploads/2018/03/mac-4-1.jpgMAC 4 - 1Nice how the light gleams on the finish!https://woodworksbyjohn.com/wp-content/uploads/2018/03/mac-3-1.jpgMAC 3 - 1Seasonal display areahttps://woodworksbyjohn.com/wp-content/uploads/2018/03/mac-2-1.jpgMAC 2 - 1Separate pedestalhttps://woodworksbyjohn.com/wp-content/uploads/2018/03/mac-1-1.jpgMAC 1 - 1Main display area2018-03-08T04:49:33+00:00monthlyhttps://woodworksbyjohn.com/2015/06/19/sawstop-sliding-table-jig-and-other-shop-happenings/https://woodworksbyjohn.com/wp-content/uploads/2015/06/veritas-depthstop-stillslips-disappointed1.jpgveritas-depthstop-stillslips-disappointedVeritas still won't holdhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/veritas-depthstop-stillslips-disappointed.jpgveritas-depthstop-stillslips-disappointedhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/smoothplaneshaving-b.jpgSmoothPlaneShaving-bWith flashhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/smoothplaneshaving-a.jpgSmoothPlaneShaving-aWithout flashhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/mitersled-sawstop-woodworksbyjohn.jpgMiterSled-SawStop-WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstop-slidingtablemiterfixture-woodworksbyjohn.jpgSawStop-SlidingTableMiterFixture-WoodworksbyJohnMitered Box Jig for SawStop Sliding Tablehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstop-slidingtablemiterfixture-woodworksbyjohn-results.jpgSawStop-SlidingTableMiterFixture-WoodworksbyJohn-results8.) Results of MDF trial boxhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstop-slidingtablemiterfixture-woodworksbyjohn-6.jpgSawStop-SlidingTableMiterFixture-WoodworksbyJohn-66.) Piece flipped to re-orient anglehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstop-slidingtablemiterfixture-woodworksbyjohn-7.jpgSawStop-SlidingTableMiterFixture-WoodworksbyJohn-77.) Other stop set for length, piece cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstop-slidingtablemiterfixture-woodworksbyjohn-5.jpgSawStop-SlidingTableMiterFixture-WoodworksbyJohn-55.) Stop is set for length, note add on piece to reach table2018-02-27T01:00:14+00:00monthlyhttps://woodworksbyjohn.com/2018/02/06/sawstops-sliding-table-to-the-rescue/https://woodworksbyjohn.com/wp-content/uploads/2018/02/teststart-11.jpgTestStart - 1Test Start = 1/2" from bladehttps://woodworksbyjohn.com/wp-content/uploads/2018/02/trimcuts.jpgTrimCutsCutting scribe striphttps://woodworksbyjohn.com/wp-content/uploads/2018/02/thecut-1.jpgTheCut - 1Resulting Cut-offhttps://woodworksbyjohn.com/wp-content/uploads/2018/02/testend-1.jpgTestEnd - 1Test End = touching bladehttps://woodworksbyjohn.com/wp-content/uploads/2018/02/rightedge-1.jpgRightEdge - 1Right Edge = 14 3/8"https://woodworksbyjohn.com/wp-content/uploads/2018/02/myshot-1.jpgMyShot - 1Bookcase Installedhttps://woodworksbyjohn.com/wp-content/uploads/2018/02/leftedge-1.jpgLeftEdge - 1Left Edge = 14 7/8"https://woodworksbyjohn.com/wp-content/uploads/2018/02/clientsshot-1.jpgClientsShot - 1Clients Picture 2018-02-07T01:32:35+00:00monthlyhttps://woodworksbyjohn.com/2018/02/01/osmo-polyx-oil-is-this-my-new-go-to-finish/https://woodworksbyjohn.com/wp-content/uploads/2018/01/results-1.jpgResults - 1Second coat wiped dryhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/firstcoat-1.jpgfirstcoat - 1Top after one coathttps://woodworksbyjohn.com/wp-content/uploads/2018/01/finalsheen-1.jpgFinalSheen - 1Tried to capture the Lusterhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/320gritapplication-1.jpg320gritapplication - 1Second coat being wet sandedhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/320grit-1.jpg320grit - 1Applying finish to eliminate drag2018-02-01T22:19:54+00:00monthlyhttps://woodworksbyjohn.com/2018/01/24/building-a-bookcase-my-approach/https://woodworksbyjohn.com/wp-content/uploads/2018/01/frontrightjoinery-11.jpgFrontRightJoinery - 1Right Front Cornerhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/frontleftjoinery-11.jpgFrontLeftJoinery - 1Left Front Cornerhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/sideview-1.jpgSideView - 1https://woodworksbyjohn.com/wp-content/uploads/2018/01/reinforcingshelf-1.jpgReinforcingShelf - 1Shelf with Reinforcementhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/jointcloseup-1.jpgJointCloseup - 1Joint Clamped-Uphttps://woodworksbyjohn.com/wp-content/uploads/2018/01/fitting-tenon-1.jpgFitting Tenon - 1https://woodworksbyjohn.com/wp-content/uploads/2018/01/backjoinery-1.jpgbackJoinery - 1Plywood back rabbeted into sides2018-01-25T02:29:07+00:00monthlyhttps://woodworksbyjohn.com/2017/08/21/sliding-door-joinery/https://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-1.jpgTenons - 1Roughing out tenonshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/tripod-1.jpgTripod - 1Tripod Supporthttps://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-6-1.jpgTenons-6 - 1It'll work!https://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-5-1.jpgTenons-5 - 1Rabbet block plane to fine tunehttps://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-4-1.jpgTenons-4 - 1Coping saw to remove waste between twin tenons https://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-3-1.jpgTenons-3 - 1Ran out of vises so got creative on holdinghttps://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-2-1.jpgTenons-2 - 1Using gauge blocks for haunchhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/tenons-1-1.jpgTenons-1 - 1Transfer mortise to tenon, shade areas to be removedhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/grooves-1.jpgGrooves - 1Grooves as neededhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/assembly-2-11.jpgAssembly-2 - 1First glue up with method to control flexing2018-01-21T21:47:00+00:00monthlyhttps://woodworksbyjohn.com/2018/01/18/walnut-bookcase/https://woodworksbyjohn.com/wp-content/uploads/2018/01/resawn-1.jpgResawn - 1Resawn Panels for Sidehttps://woodworksbyjohn.com/wp-content/uploads/2018/01/planingstage-1.jpgPlaningStage - 1Parts ready for joineryhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/gluedup-1-1.jpggluedup - 1 (1)3.) Gorilla Glue ooze!https://woodworksbyjohn.com/wp-content/uploads/2018/01/endgrain-1.jpgEndGrain - 14.) Working the end grainhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/checkingsquareness2-1.jpgCheckingSquareness2 - 12.) Checking for equal resistancehttps://woodworksbyjohn.com/wp-content/uploads/2018/01/checkingsquareness-1.jpgCheckingSquareness - 11.) Checking for flat & square2018-01-19T02:30:51+00:00monthlyhttps://woodworksbyjohn.com/2018/01/06/lovely-vanessa-frame/https://woodworksbyjohn.com/wp-content/uploads/2018/01/rubback-1.jpgRubBack - 1Rubbing back gold to expose texture and coloration of the framehttps://woodworksbyjohn.com/wp-content/uploads/2018/01/lovelyvanessa-1.jpgVersion 2Lovely Vanessa by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/vanessachamferedge-1-e1515199365382.jpgVanessaChamferEdge - 1https://woodworksbyjohn.com/wp-content/uploads/2018/01/goldleaf-1.jpgGoldLeaf - 1Oil gilding directly over the Walnuthttps://woodworksbyjohn.com/wp-content/uploads/2018/01/gluedup-1.jpgGluedUp - 1"Gang clamping" frame membershttps://woodworksbyjohn.com/wp-content/uploads/2018/01/framegroove-1.jpgFrameGroove - 1Plowing groove for floater sectionhttps://woodworksbyjohn.com/wp-content/uploads/2018/01/chamfer-1.jpgChamfer - 1Planing chamfer on outer edge2018-01-06T23:37:57+00:00monthlyhttps://woodworksbyjohn.com/2017/12/12/design-carving-procedure-for-custom-frame/https://woodworksbyjohn.com/wp-content/uploads/2017/12/freshlygilded2-1.jpgFreshlyGilded2 - 1Freshly Gilded ready to tonehttps://woodworksbyjohn.com/wp-content/uploads/2017/12/freshlygilded1-1.jpgFreshlyGilded1 - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2017/12/slideshow-6-1.jpgSlideShow-6 - 16.) Small V used for leaf centerhttps://woodworksbyjohn.com/wp-content/uploads/2017/12/slideshow-5-1.jpgSlideShow-5 - 15.) Scooping to create illusion of depthhttps://woodworksbyjohn.com/wp-content/uploads/2017/12/slideshow-4-1.jpgSlideShow-4 - 14.) Various #2 to create a scoop between leaf and outer edgehttps://woodworksbyjohn.com/wp-content/uploads/2017/12/slideshow-3-1.jpgSlideShow-3 - 13.) #2 to ground outhttps://woodworksbyjohn.com/wp-content/uploads/2017/12/slideshow-2-1.jpgSlideShow-2 - 12.) #7/20mm defined largest leafhttps://woodworksbyjohn.com/wp-content/uploads/2017/12/slideshow-1-1.jpgSlideShow-1 - 11.) V-Chisel to define stem2017-12-13T14:58:48+00:00monthlyhttps://woodworksbyjohn.com/2017/12/01/mid-century-modern-dresser-to-double-vanity/https://woodworksbyjohn.com/wp-content/uploads/2017/11/vanitydone2-1.jpgVanityDone2 - 1Dresser to Double Vanityhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/vanitydone1-1.jpgVanityDone1 - 1Vanity Complete with modified drawerhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/vanity3-11.jpgVanity3 - 1Bandsaw to cut out drawerhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/vanity2-1.jpgVanity2 - 1View of drawer bottom, looks like Poplarhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/inprogress-12.jpgInProgress - 1Using new miter saw stand to fit plywoodhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/first-drawer-11.jpgFirst Drawer - 1First drawer trial and success!2017-12-01T18:26:22+00:00monthlyhttps://woodworksbyjohn.com/2017/11/27/november-another-month-gone/https://woodworksbyjohn.com/wp-content/uploads/2017/11/transfer-3-1.jpgTransfer-3 - 13.) Pattern flipped for other leghttps://woodworksbyjohn.com/wp-content/uploads/2017/11/transfer-2-1.jpgTransfer-2 - 12.) Leaves drawn in, number indicates chisel sizehttps://woodworksbyjohn.com/wp-content/uploads/2017/11/transfer-1-1.jpgTransfer-1 - 11.) Branch curve drawnhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/oliveleafmotif-1.jpgOliveLeafMotif - 14.) Corner samplehttps://woodworksbyjohn.com/wp-content/uploads/2017/11/lemler-nude-2-1.jpgLemler Nude 2 - 1Robert Lemler Painting 12" x 24"https://woodworksbyjohn.com/wp-content/uploads/2017/11/lemler-nude-1-1.jpgLemler Nude 1 - 1Robert Lemler Painting 4" x 10"https://woodworksbyjohn.com/wp-content/uploads/2017/11/bluetooth-1.jpgBlueTooth - 1Rockler Speaker Kit2023-06-24T17:07:12+00:00monthlyhttps://woodworksbyjohn.com/2017/11/22/black-limba-dovetailed-box/https://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-tailsplaned-1.jpgBlackLimba-TailsPlaned - 1Tails Planedhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-tailsfit1-1.jpgBlackLimba-TailsFit1 - 1https://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-tails-1.jpgBlackLimba-Tails - 1Tails cut, note Rabbet aka "Stanley 140 trick"https://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-lidrabbet-1.jpgBlackLimba-LidRabbet - 1Rabbet cut on underside of lidhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-lidmortise-1.jpgBlackLimba-Lidmortise - 1Mortising in the handlehttps://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-lidchamfer2-1.jpgBlackLimba-Lidchamfer2 - 1Planing the corners to match https://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-lidchamfer1-1.jpgBlackLimba-Lidchamfer1 - 1Beginning lid angle across grainhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/blacklimba-5-1.jpgBlackLimba-5 - 12017-11-23T00:42:30+00:00monthlyhttps://woodworksbyjohn.com/2017/11/10/creating-custom-profile-picture-frame-moldings/https://woodworksbyjohn.com/wp-content/uploads/2017/11/tablesawjig-1.jpgTablesawJig - 1Cutting Miters, large frame in foregroundhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/trialfit-1.jpgtrialfit - 1Dry fit of completed profilehttps://woodworksbyjohn.com/wp-content/uploads/2017/11/roughstock2-1.jpgRoughstock2 - 1Rough 8/4 Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/roughstock1-1.jpgRoughstock1 - 1https://woodworksbyjohn.com/wp-content/uploads/2017/11/inprogress-11.jpgInProgress - 1https://woodworksbyjohn.com/wp-content/uploads/2017/11/handwork-1.jpgHandwork - 1Fine tuning the chamferhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/cove2-1.jpgCove2 - 1Tadpole sander plus 220 paperhttps://woodworksbyjohn.com/wp-content/uploads/2017/11/cove1-1.jpgCove1 - 1Notice the tear out on top?2017-11-11T02:57:04+00:00monthlyhttps://woodworksbyjohn.com/2017/10/26/utilitarian-project-miter-saw-stand/https://woodworksbyjohn.com/wp-content/uploads/2017/10/miterstandwing-1.jpgMiterStandWing - 1Close up of Wing supporthttps://woodworksbyjohn.com/wp-content/uploads/2017/10/miterstandspray2-1.jpgMiterStandSpray2 - 1Front and Side Viewhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/miterstandspray1-1.jpgMiterStandSpray1 - 1Back showing Storage Areahttps://woodworksbyjohn.com/wp-content/uploads/2017/10/miterstandopen-1.jpgMiterStandOpen - 1Wings out, ready to cut!https://woodworksbyjohn.com/wp-content/uploads/2017/10/miterstandbackview-1.jpgMiterStandBackView - 1Storage capabiltyhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/miterstand3-4view-1.jpgMiterStand3-4view - 12017-10-27T02:51:55+00:00monthlyhttps://woodworksbyjohn.com/2017/10/13/christine-profile-frames-completed/https://woodworksbyjohn.com/wp-content/uploads/2017/10/processcompare-2-1.jpgProcessCompare-2 - 1Finish Comparison #2https://woodworksbyjohn.com/wp-content/uploads/2017/10/workprogress-1.jpgWorkProgress - 1Progress, Clamped, Finished, & Signedhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/waxprocess-1.jpgWaxProcess - 1Rub-out processhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/processcompare-1-1.jpgProcessCompare-1 - 1Finish Comparison #1https://woodworksbyjohn.com/wp-content/uploads/2017/10/christineprofiledetail-1.jpgChristineProfileDetail - 1Base coat revealed https://woodworksbyjohn.com/wp-content/uploads/2017/10/christine-profile-1.jpgChristine Profile - 1Christine Profilehttps://woodworksbyjohn.com/wp-content/uploads/2017/10/assembly-1.jpgAssembly - 1Assembly Process2017-10-13T19:00:30+00:00monthlyhttps://woodworksbyjohn.com/2017/10/05/christine-profile-frame-progress/https://woodworksbyjohn.com/wp-content/uploads/2017/10/handwork-1.jpgHandWork - 15.) Hand Workhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/so-it-begins-1.jpgSo It Begins - 120 Board Feet of Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/sightedge-1.jpgSightEdge - 11.) Sight Edgehttps://woodworksbyjohn.com/wp-content/uploads/2017/10/rabbet-1.jpgRabbet - 14.) Rabbethttps://woodworksbyjohn.com/wp-content/uploads/2017/10/miters-1.jpgMiters - 1Mitering to Sizehttps://woodworksbyjohn.com/wp-content/uploads/2017/10/machining-complete-1.jpgMachining Complete - 160 Frame Pieces for Assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/coves-flutes-1.jpgCoves-Flutes - 12.) Coveshttps://woodworksbyjohn.com/wp-content/uploads/2017/10/biscuits-1.jpgBiscuits - 1Biscuit Joinerhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/15-degree-chamfer-1.jpg15 degree chamfer - 13.) 15° Chamfer2017-10-13T18:59:07+00:00monthlyhttps://woodworksbyjohn.com/2017/10/03/picture-frames-dmt-stones/https://woodworksbyjohn.com/wp-content/uploads/2017/10/dmt-holders-1.jpgDMT Holders - 1Both holders and storage rackhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/christineprofile-1.jpgChristineProfile - 1https://woodworksbyjohn.com/wp-content/uploads/2017/10/chisel-planes-stones-1.jpgChisel-planes Stones - 13" x 8" Holderhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/carvingstones-1.jpgCarvingStones - 12" x 6" Holderhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/4x4-unframed-1.jpg4x4 Unframed - 1Without Framehttps://woodworksbyjohn.com/wp-content/uploads/2017/10/4x4-framed-1.jpg4x4 Framed - 1Framedhttps://woodworksbyjohn.com/wp-content/uploads/2017/10/3x6-unframed-1.jpg3x6 UnFramed - 1Without Framehttps://woodworksbyjohn.com/wp-content/uploads/2017/10/3x6-framed-1.jpg3x6 Framed - 1Framed2017-10-03T17:19:37+00:00monthlyhttps://woodworksbyjohn.com/2017/09/27/shop-happenings-since-last-post/https://woodworksbyjohn.com/wp-content/uploads/2017/09/slidingdoorinstalled-1.jpgSlidingDoorinstalled - 1Sliding Door, Alderhttps://woodworksbyjohn.com/wp-content/uploads/2017/09/float-1.jpgFloat - 1Waiting to go homehttps://woodworksbyjohn.com/wp-content/uploads/2017/09/dmt-holder-1.jpgDMT Holder - 16.) DMT Holderhttps://woodworksbyjohn.com/wp-content/uploads/2017/09/results-1.jpgResults - 16.) Results on Alderhttps://woodworksbyjohn.com/wp-content/uploads/2017/09/finestoneinprogress-1.jpgFineStoneinProgress - 12.) Start on Fine Stone, still see "something"https://woodworksbyjohn.com/wp-content/uploads/2017/09/finestonedone-1.jpgFineStoneDone - 13.) Fine stone work completehttps://woodworksbyjohn.com/wp-content/uploads/2017/09/extrafinestonedone-1-1.jpgExtraFineStoneDone - 1 (1)4.) Extra Fine work completehttps://woodworksbyjohn.com/wp-content/uploads/2017/09/extraextrafinestonedone-1.jpgExtraExtraFineStoneDone - 15.) Extra-Extra Fine Stonehttps://woodworksbyjohn.com/wp-content/uploads/2017/09/beginning-1.jpgBeginning - 11.) The blade fresh out of the plane2017-10-04T02:10:06+00:00monthlyhttps://woodworksbyjohn.com/2017/09/13/vandam-float-new-framing-commission/https://woodworksbyjohn.com/wp-content/uploads/2017/09/tongues-1.jpgtongues - 1Tonguing the plywoodhttps://woodworksbyjohn.com/wp-content/uploads/2017/09/joinerydetail-1.jpgJoineryDetail - 1Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2017/09/gussets-1.jpgGussets - 1Gussets, glue, and clampshttps://woodworksbyjohn.com/wp-content/uploads/2017/09/grooves-1.jpgGrooves - 1Grooving the sideshttps://woodworksbyjohn.com/wp-content/uploads/2017/09/framecomponents-1.jpgFrameComponents - 1Assembling the componentshttps://woodworksbyjohn.com/wp-content/uploads/2017/09/assembledlarge-1.jpgAssembledLarge - 1Large frame assembled2017-09-14T03:07:11+00:00monthlyhttps://woodworksbyjohn.com/2017/09/08/floater-frame-a-furniture-builders-method/https://woodworksbyjohn.com/wp-content/uploads/2017/09/attachdone-11.jpgAttachDone - 1https://woodworksbyjohn.com/wp-content/uploads/2017/09/attachdone-1-1.jpgAttachDone - 1 (1)#6 screws & washers = Done!https://woodworksbyjohn.com/wp-content/uploads/2017/09/taping-floatframe-1.jpgTaping Floatframe - 1Masking off the inner surfaceshttps://woodworksbyjohn.com/wp-content/uploads/2017/09/stockprepgroove-1.jpgStockPrepGroove - 1Grooving frame pieceshttps://woodworksbyjohn.com/wp-content/uploads/2017/09/floaterframe-3-1.jpgFloaterFrame-3 - 1Glue-up, nested between clampshttps://woodworksbyjohn.com/wp-content/uploads/2017/09/floaterframe-2-1.jpgFloaterFrame-2 - 1Frame and Canvas holderhttps://woodworksbyjohn.com/wp-content/uploads/2017/09/canvasattach-1.jpgCanvasAttach - 1Gimlet through pre-drilled holes2017-09-08T15:30:19+00:00monthlyhttps://woodworksbyjohn.com/2017/08/24/sliding-door-almost-complete/https://woodworksbyjohn.com/wp-content/uploads/2017/08/smoothplane-1.jpgSmoothPlane - 1Smooth Plane prior to assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/glassrecess-1.jpgGlassRecess - 1Glass Recesshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/assembly-whole-1.jpgAssembly whole - 1Afternoon clamp -- it's done!https://woodworksbyjohn.com/wp-content/uploads/2017/08/assembly-half-1.jpgAssembly half - 1Morning clamp, half a doorhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/1-1.jpg1 - 1Glass Stop2017-08-25T03:03:17+00:00monthlyhttps://woodworksbyjohn.com/2017/08/17/new-commission-sliding-door/https://woodworksbyjohn.com/wp-content/uploads/2017/08/scrubplane-1.jpgScrubPlane - 1Scrub Plane to flattenhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/windingstick-1.jpgWindingStick - 1View over the Winding Stickshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/stockprepstart-1.jpgStockPrepStart - 1Beginning of Sizing https://woodworksbyjohn.com/wp-content/uploads/2017/08/stockprepdone-1.jpgStockPrepDone - 1End of day 1, surfaced and planed to widthhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/sliding-privacydoor-1.jpgSliding-PrivacyDoor - 1Sliding Door Planshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/edging3-1.jpgEdging3 - 1Almost donehttps://woodworksbyjohn.com/wp-content/uploads/2017/08/edging2-1.jpgEdging2 - 1Love those shavings!https://woodworksbyjohn.com/wp-content/uploads/2017/08/edging1-1.jpgEdging1 - 1#7 Stanley Jointer2017-08-17T20:38:15+00:00monthlyhttps://woodworksbyjohn.com/2017/08/07/patio-table-is-done/https://woodworksbyjohn.com/wp-content/uploads/2017/08/withchairs-1.jpgWithChairs - 1Table and Chairshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/table-in-place-1.jpgTable in Place - 1Table in Placehttps://woodworksbyjohn.com/wp-content/uploads/2017/08/detail2-1.jpgdetail2 - 1Trestle Detailhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/detail1-1.jpgdetail1 - 1Top Detailhttps://woodworksbyjohn.com/wp-content/uploads/2017/08/tongues-11.jpgTongues - 1Cutting Tongueshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/dryfit-3-1.jpgDryfit-3 - 1Spacer and nail guidehttps://woodworksbyjohn.com/wp-content/uploads/2017/08/dryfit-2-1.jpgDryfit-2 - 1Glued up with infill pieceshttps://woodworksbyjohn.com/wp-content/uploads/2017/08/dryfit-11.jpgDryfit - 1Dry fit before finishinghttps://woodworksbyjohn.com/wp-content/uploads/2017/08/assembly-3-12.jpgAssembly-3 - 1Assembled and ready!https://woodworksbyjohn.com/wp-content/uploads/2017/08/assembly-2-1.jpgAssembly-2 - 1Checking to make sure screws move freely in slots2017-08-08T15:47:32+00:00monthlyhttps://woodworksbyjohn.com/2017/07/28/patio-table-phase-2/https://woodworksbyjohn.com/wp-content/uploads/2017/07/wedge-1.jpgWedge - 1Bandsaw Jig for Wedgehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/theplan-1.jpgThePlan - 1End and center pieces glued to one sidehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/tenons-1.jpgTenons - 1Cutting the haunch for the tophttps://woodworksbyjohn.com/wp-content/uploads/2017/07/tenonmarking-11.jpgTenonMarking - 1Joints markedhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/stanley271-1.jpgStanley271 - 1Squaring up haunchhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/paperplan-1.jpgPaperPlan - 1Working Drawinghttps://woodworksbyjohn.com/wp-content/uploads/2017/07/jointmarking2-1.jpgJointMarking2 - 1It fits!https://woodworksbyjohn.com/wp-content/uploads/2017/07/jointmarking-1.jpgJointMarking - 1https://woodworksbyjohn.com/wp-content/uploads/2017/07/fitasyougo-1.jpgFitasyouGo - 1Fitting as I go, plane and a bit of sandpaperhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/closeup-1.jpgCloseup - 1Close up of Wedged Tenons2017-07-29T00:30:04+00:00monthlyhttps://woodworksbyjohn.com/2017/07/17/patio-table/https://woodworksbyjohn.com/wp-content/uploads/2017/07/prep-1-1.jpgPrep - 1 (1)Machine work is done, time for quiet hand work to refine and fit.https://woodworksbyjohn.com/wp-content/uploads/2017/07/top-2-1.jpgTop-2 - 1Paring chisel on angleshttps://woodworksbyjohn.com/wp-content/uploads/2017/07/top-1-1.jpgTop-1 - 1Spokeshave on flatshttps://woodworksbyjohn.com/wp-content/uploads/2017/07/throughtenon2-1.jpgThroughTenon2 - 1Second pass, flipped and completehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/throughtenon1-1.jpgThroughTenon1 - 1First Pass, part way throughhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/tenonsetup-1.jpgTenonSetup - 1Tenon Set-Uphttps://woodworksbyjohn.com/wp-content/uploads/2017/07/tenonmarking-1.jpgTenonMarking - 1Mortise & Tenon markedhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/prep-1.jpgPrep - 1Jointing the Edgehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/mortise-2-1.jpgMortise-2 - 1Mortises completehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/mortise-1-1.jpgMortise-1 - 1Pieces clamped together for accuracy2017-07-19T02:26:31+00:00monthlyhttps://woodworksbyjohn.com/2017/07/12/keepsake-box-wenge-spalted-maple/https://woodworksbyjohn.com/wp-content/uploads/2017/07/resaw-1.jpgResaw - 1Re-Sawing Spalted Maplehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/davidsboxfeet-1.jpgDavid'sBoxFeet - 1Counter bored hole for silicone padhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/boxtray-2-1.jpgBoxTray-2 - 1Checked for square and readyhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/boxtray-1-1.jpgBoxTray-1 - 1Taped and ready for assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2017/07/boxtails-1.jpgBoxTails - 1Tails on Spalted Maplehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/boxpins-1.jpgBoxPins - 1Pins on Wengehttps://woodworksbyjohn.com/wp-content/uploads/2017/07/bottomgroove-1.jpgBottomGroove - 1Plowing the bottom groove, notice the lipped area for the dovetails2017-07-13T03:02:33+00:00monthlyhttps://woodworksbyjohn.com/2017/06/13/the-making-of-frame-107/https://woodworksbyjohn.com/wp-content/uploads/2017/06/corner2-1.jpgcorner2 - 1One corner ground outhttps://woodworksbyjohn.com/wp-content/uploads/2017/06/corner1-1.jpgcorner1 - 1Corner in progresshttps://woodworksbyjohn.com/wp-content/uploads/2017/06/template2-1.jpgTemplate2 - 1Pattern #2https://woodworksbyjohn.com/wp-content/uploads/2017/06/tonedgild-1.jpgTonedGild - 1https://woodworksbyjohn.com/wp-content/uploads/2017/06/initialgild-1.jpgInitialGild - 1https://woodworksbyjohn.com/wp-content/uploads/2017/06/golfball-skew-2-1.jpgGolfball Skew-2 - 1Skew in use to outlinehttps://woodworksbyjohn.com/wp-content/uploads/2017/06/golfball-skew-1-1.jpgGolfball Skew-1 - 1Golf Ball Skewhttps://woodworksbyjohn.com/wp-content/uploads/2017/06/firstbraid-1.jpgFirstBraid - 1Creating the Patternhttps://woodworksbyjohn.com/wp-content/uploads/2017/06/designtransfer-1.jpgDesignTransfer - 1Pattern #1https://woodworksbyjohn.com/wp-content/uploads/2017/06/designing-1.jpgDesigning - 1Braid Designs2017-06-14T15:07:56+00:00monthlyhttps://woodworksbyjohn.com/2017/05/25/beaded-frame-105/https://woodworksbyjohn.com/wp-content/uploads/2017/05/rabbetplane-1.jpgRabbetPlane - 1Cutting the Rabbetshttps://woodworksbyjohn.com/wp-content/uploads/2017/05/beadedframeprofile2-1.jpgBeadedFrameProfile2 - 1Molding Profilehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/beadedframeclamp2-1.jpgBeadedFrameClamp2 - 1Securely biscuited, glued, and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/beadedframeclamp1-1.jpgBeadedFrameClamp1 - 1Angled scrap attached to framehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/plow-plane-1.jpgPlow Plane - 1Scrub Plane2017-05-25T23:54:12+00:00monthlyhttps://woodworksbyjohn.com/2017/05/22/fence-for-plow-plane/https://woodworksbyjohn.com/wp-content/uploads/2017/05/brassinserts-1.jpgBrassInserts - 1https://woodworksbyjohn.com/wp-content/uploads/2017/05/rabbetskew-1.jpgRabbetSkew - 1Auxiliary Fence on Rabbet Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/ppfence-3-1.jpgPPFence-3 - 1Finished off with spokeshavehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/ppfence-2-1.jpgPPFence-2 - 1Cut off used to trace designhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/ppfence-1-1.jpgPPFence-1 - 1Front cut with coping sawhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/ppfence-installed-2-1.jpgPPFence Installed-2 - 1Top Viewhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/ppfence-installed-1-1.jpgPPFence Installed-1 - 1Side View2022-01-11T02:30:04+00:00monthlyhttps://woodworksbyjohn.com/2017/05/16/small-plow-plane-box-complete/https://woodworksbyjohn.com/wp-content/uploads/2017/05/mortise-1.jpgmortise - 1Mortising for Latchhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/plowplanebox-4-1.jpgPlowPlaneBox-4 - 1Box Closed & Latchedhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/plowplanebox-3-1.jpgPlowPlaneBox-3 - 1Open; Plane securely strappedhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/plowplanebox-2-1.jpgPlowPlaneBox-2 - 1Plane removed, note blade storagehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/plowplanebox-1-1.jpgPlowPlaneBox-1 - 1Blade storage revealedhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/plowplanebox-bladeholder-1.jpgPlowPlaneBox Bladeholder - 1Creating the Blade holder2022-01-11T04:02:14+00:00monthlyhttps://woodworksbyjohn.com/2017/05/13/project-thats-getting-away-from-me/https://woodworksbyjohn.com/wp-content/uploads/2017/05/finalrabbet-1.jpgFinalRabbet - 1Final sizing after tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/thegoal-1.jpgTheGoal - 1Flame Oak & Skew Rabbet Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/initialrabbet-1.jpgInitialRabbet - 1Initial Cuthttps://woodworksbyjohn.com/wp-content/uploads/2017/05/drillpresssetup-1.jpgDrillPressSetup - 1Drill Press Set-Uphttps://woodworksbyjohn.com/wp-content/uploads/2017/05/dowelmaking4-1.jpgDowelMaking4 - 1Pound through 3/16" dowel platehttps://woodworksbyjohn.com/wp-content/uploads/2017/05/dowelmaking3-1.jpgDowelMaking3 - 1Sharpen one end with pencil sharpenerhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/dowelmaking2-1.jpgDowelMaking2 - 1Use "dowel sled" to create octagonhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/dowelmaking1-1.jpgDowelMaking1 - 1Rip stock slightly oversized on bandsawhttps://woodworksbyjohn.com/wp-content/uploads/2017/05/dovetail-attempt-1.jpgDovetail Attempt - 1Dovetail & Flame Oak = NoGohttps://woodworksbyjohn.com/wp-content/uploads/2017/05/boardstretcher-1.jpgBoardStretcher - 12017-05-13T19:44:30+00:00monthlyhttps://woodworksbyjohn.com/2017/05/04/faux-sgraffito-frame-complete/https://woodworksbyjohn.com/wp-content/uploads/2017/05/fauxsgraffitodone-1.jpgFauxSgraffitodone - 12017-05-04T21:43:57+00:00monthlyhttps://woodworksbyjohn.com/2017/04/26/frame-104-faux-sgraffitto/https://woodworksbyjohn.com/wp-content/uploads/2017/04/cornerdetail-1.jpgCornerDetail - 1Wedgewood & Lilac Corner https://woodworksbyjohn.com/wp-content/uploads/2017/04/smooth-plane-view-1.jpgSmooth Plane View - 1View from the Smooth Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/rabbetplane-aid-1.jpgRabbetPlane aid - 1Clearing the Rabbet Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/rabbet-plane-view-1.jpgRabbet Plane View - 1View from the Rabbet Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/plow-plane-view-1.jpgPlow Plane View - 1View from the Plow Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/jointerview-1.jpgJointerView - 1View from the Jointer Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/fauxsgraffito-profile-1.jpgFauxSgraffito Profile - 1Frame Profilehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/fauxsgraffito-layout-1.jpgFauxSgraffito Layout - 1Lay Out of Patternhttps://woodworksbyjohn.com/wp-content/uploads/2017/04/fauxsgraffito-depth-of-cut-1.jpgFauxSgraffito Depth of cut - 1Thickness of shaving indicates uniform depthhttps://woodworksbyjohn.com/wp-content/uploads/2017/04/fauxsgraffito-clayed-1.jpgFauxSgraffito Clayed - 1Faux Sgraffito Ready to Gild2017-05-06T18:00:30+00:00monthlyhttps://woodworksbyjohn.com/2017/04/24/more-frames-seems-to-be-a-theme-here/https://woodworksbyjohn.com/wp-content/uploads/2017/04/almostsummer-black-1.jpgAlmostSummer-Black - 1Black Framehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/almost-summer-silver-11.jpgAlmost Summer-Silver - 1Silver Framehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/almost-summer-gold-11.jpgAlmost Summer-Gold - 1Gold Frame2017-04-26T02:46:19+00:00monthlyhttps://woodworksbyjohn.com/2017/04/14/diamond-motif-frame-103/https://woodworksbyjohn.com/wp-content/uploads/2017/04/almost-summer-painting-1.jpgAlmost Summer-Painting - 1Almost Summer by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2017/04/silverleaf-sitegold-1.jpgSilverLeaf-SiteGold - 1https://woodworksbyjohn.com/wp-content/uploads/2017/04/silverleaf-shellacked-1.jpgSilverLeaf-Shellacked - 1Diamond Motif in Silverhttps://woodworksbyjohn.com/wp-content/uploads/2017/04/newlook-1.jpgNewLook - 1New Shop Look2017-04-15T00:19:13+00:00monthlyhttps://woodworksbyjohn.com/2017/04/06/15-boxes-progress/https://woodworksbyjohn.com/wp-content/uploads/2017/04/stanley140-nonosha-1.jpgStanley140-NonOSHA - 1Not OSHA approvedhttps://woodworksbyjohn.com/wp-content/uploads/2017/04/together-1.jpgTogether - 1Partially assembled and sitting on frames ready to carvehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/tails-3-1.jpgTails-3 - 1Waste between tailshttps://woodworksbyjohn.com/wp-content/uploads/2017/04/tails-2-1.jpgTails-2 - 1Chisel cut notch, aids sawinghttps://woodworksbyjohn.com/wp-content/uploads/2017/04/tails-1-1.jpgTails-1 - 1Initial cutshttps://woodworksbyjohn.com/wp-content/uploads/2017/04/pins-1-1.jpgPins-1 - 1Router aid to remove waste between pinshttps://woodworksbyjohn.com/wp-content/uploads/2017/04/lv-small-plough-plane-1.jpgLV Small Plough Plane - 1Lee Valley Small Plow Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/04/15c2b0-box-prep-stock2-1.jpg15° Box - prep stock2 - 1Antique, corrugated #7 put to work!https://woodworksbyjohn.com/wp-content/uploads/2017/04/15c2b0-box-prep-stock-1.jpg15° Box - prep stock - 1Straight edge showing low areashttps://woodworksbyjohn.com/wp-content/uploads/2017/04/15c2b0-box-layout-tails-1.jpg15° Box - Layout tails - 12017-04-07T13:41:39+00:00monthlyhttps://woodworksbyjohn.com/2017/03/26/week-in-review/https://woodworksbyjohn.com/wp-content/uploads/2017/03/planningmotif-1.jpgPlanningMotif - 1Choosing chisels & gougeshttps://woodworksbyjohn.com/wp-content/uploads/2017/03/screen-shot-2017-03-26-at-5-49-36-pm.pngScreen Shot 2017-03-26 at 5.49.36 PMEarring Inspiration https://woodworksbyjohn.com/wp-content/uploads/2017/03/pictureshoot3-1.jpgPictureShoot3 - 1Close up of clamps, smaller one is in the tubehttps://woodworksbyjohn.com/wp-content/uploads/2017/03/pictureshoot2-1.jpgPictureShoot2 - 1Clamps to hold rollhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/pictureshoot1-1.jpgPictureShoot1 - 1Photography in progresshttps://woodworksbyjohn.com/wp-content/uploads/2017/03/laundryroom-1-1.jpgLaundryRoom - 1 (1)Waiting for the Washer and Dryerhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/cornerprototype-1.jpgCornerPrototype - 1Practice cornerhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/cornergilded-1.jpgCornerGilded - 1Gilded with silver patent leaf2017-03-28T03:27:20+00:00monthlyhttps://woodworksbyjohn.com/2017/03/17/utility-sink-progress-2/https://woodworksbyjohn.com/wp-content/uploads/2017/03/sinkclipnotchinstall-1.jpgSinkClipNotchInstall - 1Sink installed and locating screw holes https://woodworksbyjohn.com/wp-content/uploads/2017/03/sinkclipnotch-1.jpgSinkClipNotch - 1Notches for sink clips, tape is the depth stop!https://woodworksbyjohn.com/wp-content/uploads/2017/03/shelf2-1.jpgShelf2 - 13/8" Grid partshttps://woodworksbyjohn.com/wp-content/uploads/2017/03/shelf1-1.jpgShelf1 - 13/4" Grid partshttps://woodworksbyjohn.com/wp-content/uploads/2017/03/opened-1.jpgOpened - 1https://woodworksbyjohn.com/wp-content/uploads/2017/03/fingerjointedapron-1.jpgFingerJointedApron - 1Finger Jointed Apron and SawStop Jig2017-03-17T23:40:48+00:00monthlyhttps://woodworksbyjohn.com/2017/03/04/utility-sink-progress/https://woodworksbyjohn.com/wp-content/uploads/2017/03/chamferlegs-1.jpgchamferlegs-1Chamfer on legshttps://woodworksbyjohn.com/wp-content/uploads/2017/03/shavingcomparison-11.jpgshavingcomparison-1https://woodworksbyjohn.com/wp-content/uploads/2017/03/shavingcomparison-1.jpgshavingcomparison-1Plane shavings comparisonhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/taperlegsbandsaw-1.jpgtaperlegsbandsaw-1Bandsaw workhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/taperlegs-1.jpgtaperlegs-1Correct surfaces2017-03-04T23:31:40+00:00monthlyhttps://woodworksbyjohn.com/2017/03/02/new-project-utility-sink/https://woodworksbyjohn.com/wp-content/uploads/2017/03/utility-sink-stand.jpegutility-sink-standMy Morphed Design!https://woodworksbyjohn.com/wp-content/uploads/2017/03/screen-shot-2017-02-20-at-7-42-44-am.pngscreen-shot-2017-02-20-at-7-42-44-amModern Utility Sinkhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/screen-shot-2017-02-16-at-2-51-39-pm.pngscreen-shot-2017-02-16-at-2-51-39-pmAntique Dutch School Deskhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/parts-is-parts-1.jpgparts-is-parts-1Parts is Parts!https://woodworksbyjohn.com/wp-content/uploads/2017/03/laundryroom-1.jpglaundryroom-1 Laundry Area Nowhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/haunched-tenon-2-1.jpghaunched-tenon-2-1Haunch Heighthttps://woodworksbyjohn.com/wp-content/uploads/2017/03/haunched-tenon-1-1.jpghaunched-tenon-1-1Haunch length https://woodworksbyjohn.com/wp-content/uploads/2017/03/hand-tools-1.jpghand-tools-1The Quite Time!https://woodworksbyjohn.com/wp-content/uploads/2017/03/bowsaw-2-1.jpgbowsaw-2-1Finished off supported by benchhttps://woodworksbyjohn.com/wp-content/uploads/2017/03/bowsaw-1-1.jpgbowsaw-1-1Cut almost completed2017-03-02T15:06:05+00:00monthlyhttps://woodworksbyjohn.com/2017/02/18/more-handwork-dovetail-box/https://woodworksbyjohn.com/wp-content/uploads/2017/02/screen-shot-2017-02-18-at-7-43-45-am.pngscreen-shot-2017-02-18-at-7-43-45-amPear Boxhttps://woodworksbyjohn.com/wp-content/uploads/2017/02/screen-shot-2017-02-18-at-7-43-05-am.pngscreen-shot-2017-02-18-at-7-43-05-amYin-Yang Boxhttps://woodworksbyjohn.com/wp-content/uploads/2017/02/topplaned-1.jpgtopplaned-1Smooth Plane the tophttps://woodworksbyjohn.com/wp-content/uploads/2017/02/stanley-78-rabbet-plane-1.jpgstanley-78-rabbet-plane-1Rabbet Plane in usehttps://woodworksbyjohn.com/wp-content/uploads/2017/02/mortiselayout2-1.jpgmortiselayout2-1Scribe locationhttps://woodworksbyjohn.com/wp-content/uploads/2017/02/mortiselayout-1.jpgmortiselayout-1Locate center after setting gauge to width https://woodworksbyjohn.com/wp-content/uploads/2017/02/mortisechop2-1.jpgmortisechop2-1Clean out with smaller chiselhttps://woodworksbyjohn.com/wp-content/uploads/2017/02/mortisechop1-1.jpgmortisechop1-1Begin chopping from centerhttps://woodworksbyjohn.com/wp-content/uploads/2017/02/cleanuprabbet-1.jpgcleanuprabbet-1Rabbet Block Plane to fine tune2017-02-19T00:51:14+00:00monthlyhttps://woodworksbyjohn.com/2017/02/16/first-hand-cut-dovetails-in-over-a-year/https://woodworksbyjohn.com/wp-content/uploads/2017/02/transfertail2-1.jpgtransfertail2-1Transfer Markings then Cuthttps://woodworksbyjohn.com/wp-content/uploads/2017/02/transfertail1-1.jpgtransfertail1-1Transfer Tails https://woodworksbyjohn.com/wp-content/uploads/2017/02/smoothplane1-1.jpgsmoothplane1-1Smooth Plane Effecthttps://woodworksbyjohn.com/wp-content/uploads/2017/02/shouldercut-1.jpgshouldercut-1Initial Cut on Tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2017/02/removewaste-1.jpgremovewaste-1Removing the Wastehttps://woodworksbyjohn.com/wp-content/uploads/2017/02/rabbetplane-1.jpgrabbetplane-1Trued up with Rabbet Block Planehttps://woodworksbyjohn.com/wp-content/uploads/2017/02/choppins-1.jpgchoppins-1Cleaning out the Wastehttps://woodworksbyjohn.com/wp-content/uploads/2017/02/15degreebox-1.jpg15degreebox-1Assembled Box2017-02-17T05:30:59+00:00monthlyhttps://woodworksbyjohn.com/2017/01/31/check-off-another-home-project/https://woodworksbyjohn.com/wp-content/uploads/2017/01/parts-1.jpgparts-1Parts is Parts!https://woodworksbyjohn.com/wp-content/uploads/2017/01/fingerhole-1.jpgfingerhole-1Finger holeshttps://woodworksbyjohn.com/wp-content/uploads/2017/01/drawersequence-6-1.jpgdrawersequence-6-1Brads to securehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/drawersequence-5-1.jpgdrawersequence-5-1Aligning bottom with spacerhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/drawersequence-4-1.jpgdrawersequence-4-1Bead of glue on bottomhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/drawersequence-3-1.jpgdrawersequence-3-1Outlining drawer sideshttps://woodworksbyjohn.com/wp-content/uploads/2017/01/drawersequence-1-1.jpgdrawersequence-1-1Front & Side joined to Back & Sidehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/bathroomvanity-1.jpgbathroomvanity-1 Units in Place2017-02-01T04:59:37+00:00monthlyhttps://woodworksbyjohn.com/2017/01/26/why-i-love-working-wood/https://woodworksbyjohn.com/wp-content/uploads/2017/01/planing2-1.jpgplaning2-1Chamfering the edgeshttps://woodworksbyjohn.com/wp-content/uploads/2017/01/planing-1.jpgplaning-1Planing the top & bottomhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/formingprofile3-1.jpgformingprofile3-1Sanding bead with tadpole sander https://woodworksbyjohn.com/wp-content/uploads/2017/01/formingprofile2-1.jpgformingprofile2-1Vacuum set-up for routerhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/formingprofile-1.jpgformingprofile-1Detail of profilehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/chamferfronts-1.jpgchamferfronts-1Chamfering the edgeshttps://woodworksbyjohn.com/wp-content/uploads/2017/01/bathroomstoragesides-1.jpgbathroomstoragesides-1https://woodworksbyjohn.com/wp-content/uploads/2017/01/bathroomstorage-1.jpgbathroomstorage-1Cabinet with Rabbeted Drawer Front2017-01-26T23:59:05+00:00monthlyhttps://woodworksbyjohn.com/2017/01/15/another-first-for-the-phoenix-shop/https://woodworksbyjohn.com/wp-content/uploads/2017/01/screen-shot-2017-01-06-at-5-10-05-pm.pngscreen-shot-2017-01-06-at-5-10-05-pmCustom Etsy Orderhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/readyforglue-1.jpgreadyforglue-1https://woodworksbyjohn.com/wp-content/uploads/2017/01/nicegrainmatch-1.jpgnicegrainmatch-1Nice corner, notice matched grainhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/initialadjustment-1.jpginitialadjustment-1Initial set-up using 3/8 gauge blockhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/fingerjointjigsawstop-1.jpgfingerjointjigsawstop-1Work in progresshttps://woodworksbyjohn.com/wp-content/uploads/2017/01/backerstrip-1.jpgbackerstrip-1Results after 3 trials, new backer board installed2017-01-15T17:00:27+00:00monthlyhttps://woodworksbyjohn.com/2017/01/09/sliding-barn-doors-my-way-and-completed/https://woodworksbyjohn.com/wp-content/uploads/2017/01/tin4-1.jpgtin4-1Fastening in placehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/tin3-1.jpgtin3-1See the difference?https://woodworksbyjohn.com/wp-content/uploads/2017/01/tin2-1.jpgtin2-1Cutting to widthhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/tin1-1.jpgtin1-1Cutting to lengthhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/rail3-1.jpgrail3-1Door in position, ready to go up!https://woodworksbyjohn.com/wp-content/uploads/2017/01/rail2-1.jpgrail2-1Track in placehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/rail1-1.jpgrail1-1https://woodworksbyjohn.com/wp-content/uploads/2017/01/methodtomadness-11.jpgmethodtomadness-1Why there's a slot for the bolthttps://woodworksbyjohn.com/wp-content/uploads/2017/01/hangerchamfer-11.jpghangerchamfer-1Chamfer for brackethttps://woodworksbyjohn.com/wp-content/uploads/2017/01/handleshaping-11.jpghandleshaping-1Tools used to form handle2017-01-11T14:32:11+00:00monthlyhttps://woodworksbyjohn.com/2017/01/07/sliding-barn-doors-my-way/https://woodworksbyjohn.com/wp-content/uploads/2017/01/haunch2-1.jpghaunch2-1Transferred to crosspiece like sohttps://woodworksbyjohn.com/wp-content/uploads/2017/01/haunch1-1.jpghaunch1-1Depth of haunch measuredhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/tenon4-1.jpgtenon4-1Cheek cuts with tenon jighttps://woodworksbyjohn.com/wp-content/uploads/2017/01/tenon3-1.jpgtenon3-1Shoulder cuts with sliding tablehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/tenon2-1.jpgtenon2-1Transfer to crosspiecehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/tenon1-1.jpgtenon1-1Measure mortisehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/mortise3-1.jpgmortise3-1Stop block for haunchhttps://woodworksbyjohn.com/wp-content/uploads/2017/01/mortise2-1.jpgmortise2-1Caliper to exactly center mortisehttps://woodworksbyjohn.com/wp-content/uploads/2017/01/mortise1-1.jpgmortise1-1Laid out, clamped together2017-01-09T02:18:11+00:00monthlyhttps://woodworksbyjohn.com/2015/03/26/mechanical-cellarette-complete/https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-finaldetails-woodworksbyjohn-marble-set.jpgMechanicalCellarette-FinalDetails-WoodworksbyJohn-Marble SetItalian Marble Set in Placehttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-finaldetails-woodworksbyjohn-liftadjuster-hiddenstorage.jpgMechanicalCellarette-FinalDetails-WoodworksbyJohn-LiftAdjuster-HiddenStorageAuton Adjustment Toolhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-finaldetails-woodworksbyjohn-legcaps.jpgMechanicalCellarette-FinalDetails-WoodworksbyJohn-LegCapsInstallation of the Leg Tipshttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-finaldetails-woodworksbyjohn-backinstalled.jpgMechanicalCellarette-FinalDetails-WoodworksbyJohn-BackInstalledBack installedhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-finaldetails-woodworksbyjohn-cablemanagement.jpgMechanicalCellarette-FinalDetails-WoodworksbyJohn-CableManagementCable mangagement2017-01-02T00:26:07+00:00monthlyhttps://woodworksbyjohn.com/2016/12/31/end-of-year-goals-met/https://woodworksbyjohn.com/wp-content/uploads/2016/12/waxjointer-1.jpgwaxjointer-1Jointer Plane getting some lubricationhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/scan.jpegscanChristmas in Phoenix 2016https://woodworksbyjohn.com/wp-content/uploads/2016/12/oceanwavesclient-1.jpgoceanwavesclient-1Anthony Thieme Painting in Ocean Waves Frame: 8"x10"https://woodworksbyjohn.com/wp-content/uploads/2016/12/northwall-1.jpgnorthwall-1North Wallhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/eastwall-1.jpgeastwall-1East Wall by Tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/chamfer-1.jpgchamfer-1Chamfering the edges2017-01-01T15:11:49+00:00monthlyhttps://woodworksbyjohn.com/2016/12/09/want-it-done-right-do-it-yourself/https://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-11-09-at-4-14-32-pm.pngscreen-shot-2016-11-09-at-4-14-32-pmWoodworks by John #1https://woodworksbyjohn.com/wp-content/uploads/2016/12/waveframetransfer-1.jpgwaveframetransfer-1Transferring Designhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/waveframespattern-1.jpgwaveframespattern-1Pattern Making https://woodworksbyjohn.com/wp-content/uploads/2016/12/waveframesample-1.jpgwaveframesample-1https://woodworksbyjohn.com/wp-content/uploads/2016/12/waveframebeginnings-1.jpgwaveframebeginnings-1Work in Progresshttps://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-12-08-at-5-09-14-pm.pngscreen-shot-2016-12-08-at-5-09-14-pmhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-12-08-at-5-08-46-pm.pngscreen-shot-2016-12-08-at-5-08-46-pmAnthony Thieme Framed Painting 8" x 10"2016-12-31T19:07:38+00:00monthlyhttps://woodworksbyjohn.com/2016/12/20/ocean-waves-frame-shining-brightly/https://woodworksbyjohn.com/wp-content/uploads/2016/12/shellacked-1.jpgshellacked-1Burnished and Shellackedhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/pre-sized-1.jpgpre-sized-1Burnisher/Sealer ready for oil sizehttps://woodworksbyjohn.com/wp-content/uploads/2016/12/freshgild-1.jpgfreshgild-1Freshly Gildedhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/dustproofed-1.jpgdustproofed-1Dust cover for 10-12 hour drying time2017-03-27T13:47:04+00:00monthlyhttps://woodworksbyjohn.com/2016/12/15/ocean-waves-frame-progress/https://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-12-15-at-8-47-16-am.pngscreen-shot-2016-12-15-at-8-47-16-amAnthony Thieme Paintinghttps://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-12-14-at-8-06-59-pm.pngscreen-shot-2016-12-14-at-8-06-59-pmPattern notes giving chisel sizeshttps://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-12-14-at-8-06-33-pm.pngscreen-shot-2016-12-14-at-8-06-33-pmPlastic Patternhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/screen-shot-2016-12-14-at-8-03-48-pm.pngscreen-shot-2016-12-14-at-8-03-48-pmFrame Corner Samplehttps://woodworksbyjohn.com/wp-content/uploads/2016/12/outlined-1.jpgoutlined-1Outlining the Patternhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/happyplace-1.jpghappyplace-1My Happy Place!https://woodworksbyjohn.com/wp-content/uploads/2016/12/groundout-1.jpggroundout-1Setting pattern out from background "grounding out"https://woodworksbyjohn.com/wp-content/uploads/2016/12/almosthalfdone-1.jpgalmosthalfdone-1Partially Complete2016-12-31T15:40:43+00:00monthlyhttps://woodworksbyjohn.com/portfolio/custom-frames/https://woodworksbyjohn.com/wp-content/uploads/2016/12/gilded9.jpggilded9Custom Frame #1https://woodworksbyjohn.com/wp-content/uploads/2016/12/almosthalfdone-5.jpgCarved CornerCustom Frame #2https://woodworksbyjohn.com/wp-content/uploads/2016/12/dsc04869-e1482116347840.jpgdsc04869Custom Frame #32016-12-19T02:21:11+00:00monthlyhttps://woodworksbyjohn.com/home/2016-12-18T23:56:29+00:00weekly0.6https://woodworksbyjohn.com/2016/12/02/drawer-unit-complete-no-dovetails-here/https://woodworksbyjohn.com/wp-content/uploads/2016/12/throughhole-1.jpgthroughhole-1Through hole, note brush to clean debrishttps://woodworksbyjohn.com/wp-content/uploads/2016/12/rabbet-tongue-joint-1.jpgrabbet-tongue-joint-1Tongue & Groove drawer jointhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/drawerunit3-1.jpgdrawerunit3-1Drawer Unit in Place with bottoms sizedhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/drawerunit2-1.jpgdrawerunit2-1Drawer Unit glued, clamped, and nailedhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/drawerunit1-1.jpgdrawerunit1-1Grooving drawer unit sideshttps://woodworksbyjohn.com/wp-content/uploads/2016/12/drawerfinal-1.jpgdrawerfinal-1Close up of drawer constructionhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/done-1.jpgdone-1Storage AreaAll in placehttps://woodworksbyjohn.com/wp-content/uploads/2016/12/counterbore-1.jpgcounterbore-1Counterbore for Screw headhttps://woodworksbyjohn.com/wp-content/uploads/2016/12/bottom-spacer-1.jpgbottom-spacer-1Adding bottom, note spacer to keep squarehttps://woodworksbyjohn.com/wp-content/uploads/2016/12/beforeafter-1.jpgbeforeafter-1From Wood to Pull2016-12-03T11:20:17+00:00monthlyhttps://woodworksbyjohn.com/2016/11/25/thanksgiving-much-to-be-thankful-for/https://woodworksbyjohn.com/wp-content/uploads/2016/11/screen-shot-2016-11-25-at-6-27-58-pm.pngscreen-shot-2016-11-25-at-6-27-58-pmWoodworksbyJohn#1 Profilehttps://woodworksbyjohn.com/wp-content/uploads/2016/11/windowsill2-1.jpgwindowsill2-1Scribed and cut to sizehttps://woodworksbyjohn.com/wp-content/uploads/2016/11/windowsill1-1.jpgwindowsill1-1Not quite a square corner!https://woodworksbyjohn.com/wp-content/uploads/2016/11/toolorganization-1.jpgtoolorganization-1West wall by Workbenchhttps://woodworksbyjohn.com/wp-content/uploads/2016/11/theproblem-1.jpgtheproblem-1My On-Going Challengehttps://woodworksbyjohn.com/wp-content/uploads/2016/11/installed-1.jpginstalled-1Installed, ready for doorshttps://woodworksbyjohn.com/wp-content/uploads/2016/11/faceframejoinery2-1.jpgfaceframejoinery2-1Glued and clamped uphttps://woodworksbyjohn.com/wp-content/uploads/2016/11/faceframejoinery1-1.jpgfaceframejoinery1-1Biscuit slots cut, dry-fit and readyhttps://woodworksbyjohn.com/wp-content/uploads/2016/11/faceframejoinery-1.jpgfaceframejoinery-1Set-up cut for face frame joineryhttps://woodworksbyjohn.com/wp-content/uploads/2016/11/assembly-1.jpgassembly-1Sides glued/clamped to face frame2016-11-26T02:51:27+00:00monthlyhttps://woodworksbyjohn.com/2016/11/14/long-time-coming/https://woodworksbyjohn.com/wp-content/uploads/2016/11/firstprojectdone-1.jpgfirstprojectdone-1Tablesaw and out feed/assembly tablehttps://woodworksbyjohn.com/wp-content/uploads/2016/11/firstproject5-1.jpgfirstproject5-1Attaching slippery ClearKote Birch plyhttps://woodworksbyjohn.com/wp-content/uploads/2016/11/firstproject4-1.jpgfirstproject4-1Ah yes, hand work to fine tune the fithttps://woodworksbyjohn.com/wp-content/uploads/2016/11/firstproject3-1.jpgfirstproject3-1Next up is cutting the tenons.https://woodworksbyjohn.com/wp-content/uploads/2016/11/firstproject2a-1.jpgfirstproject2a-1After cutting to size, mortising timehttps://woodworksbyjohn.com/wp-content/uploads/2016/11/firstproject2-1.jpgfirstproject2-1First legs assembledhttps://woodworksbyjohn.com/wp-content/uploads/2016/11/carvingbench-1.jpgcarvingbench-1West Wall by Carving Area2016-11-15T14:36:19+00:00monthlyhttps://woodworksbyjohn.com/2016/11/02/so-much-good-stuff/https://woodworksbyjohn.com/wp-content/uploads/2016/11/newshop1-1.jpgnewshop1-1Love making shavingshttps://woodworksbyjohn.com/wp-content/uploads/2016/11/newshop-1.jpgnewshop-1Finally -- At the Bench!2016-11-03T17:27:57+00:00monthlyhttps://woodworksbyjohn.com/2016/10/31/phoenix-shop-transformation/https://woodworksbyjohn.com/wp-content/uploads/2016/10/original-entry-use-1.jpgoriginal-entry-use-1Entry: Beforehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/south-1.jpgsouth-1Entry: Afterhttps://woodworksbyjohn.com/wp-content/uploads/2016/10/original-entry-1.jpgoriginal-entry-1Entry: Beforehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/southwest-1.jpgsouthwest-1Southwest: Afterhttps://woodworksbyjohn.com/wp-content/uploads/2016/10/originalsouth-1.jpgoriginalsouth-1Southwest: Beforehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/originalnorthwest-1.jpgoriginalnorthwest-1 Northwest Corner: Beforehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/northwest-11.jpgnorthwest-1Northwest Corner: Afterhttps://woodworksbyjohn.com/wp-content/uploads/2016/10/originalnortheast-1.jpgoriginalnortheast-1Northeast Corner: Beforehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/northeast-1.jpgnortheast-1Northeast Corner: Afterhttps://woodworksbyjohn.com/wp-content/uploads/2016/10/finished-windows-1.jpgfinished-windows-1Updated, operable small windows2016-11-01T03:22:04+00:00monthlyhttps://woodworksbyjohn.com/2016/10/12/woodshop-progress-dilemmas-continue/https://woodworksbyjohn.com/wp-content/uploads/2016/10/window-replaced-1.jpgwindow-replaced-1Re-framed for replacements https://woodworksbyjohn.com/wp-content/uploads/2016/10/window-removed-1.jpgwindow-removed-1Large window removed (notice the post)https://woodworksbyjohn.com/wp-content/uploads/2016/10/drywall-in-progress-1.jpgdrywall-in-progress-1Getting therehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/drywall-ialmost-done-1.jpgdrywall-ialmost-done-1Almost done, just box beam and posts left.https://woodworksbyjohn.com/wp-content/uploads/2016/10/insulation3-1-1.jpginsulation3-1-1In place and ready to chill!https://woodworksbyjohn.com/wp-content/uploads/2016/10/installbegun-removedrywall-1.jpginstallbegun-removedrywall-1Tubing installed, drywall removedhttps://woodworksbyjohn.com/wp-content/uploads/2016/10/work-1.jpgwork-1Finally, will it work? -- yes!!https://woodworksbyjohn.com/wp-content/uploads/2016/10/spliced-1.jpgspliced-1Will it splice? -- yeshttps://woodworksbyjohn.com/wp-content/uploads/2016/10/problem-1.jpgproblem-1Problem, gap at ridgehttps://woodworksbyjohn.com/wp-content/uploads/2016/10/porchlighton-1.jpgporchlighton-12016-10-13T06:46:40+00:00monthlyhttps://woodworksbyjohn.com/2016/09/28/window-woes-and-other-concerns/https://woodworksbyjohn.com/wp-content/uploads/2016/09/measure-twice-cut-once-1.jpgmeasure-twice-cut-once-1Measure twice, cut oncehttps://woodworksbyjohn.com/wp-content/uploads/2016/09/wheres-the-stud-1.jpgwheres-the-stud-1Where's the Stud?https://woodworksbyjohn.com/wp-content/uploads/2016/09/trimmed-1.jpgtrimmed-1Ready for painthttps://woodworksbyjohn.com/wp-content/uploads/2016/09/old-school-string-level-1.jpgold-school-string-level-1Berm complete, string line to check gradehttps://woodworksbyjohn.com/wp-content/uploads/2016/09/lineleveldetail-1.jpglineleveldetail-1Know what this is?https://woodworksbyjohn.com/wp-content/uploads/2016/09/huh-3-1.jpghuh-3-1Post ?? https://woodworksbyjohn.com/wp-content/uploads/2016/09/huh-2-1.jpghuh-2-1In the middle of a window?https://woodworksbyjohn.com/wp-content/uploads/2016/09/huh-1-1.jpghuh-1-1Yep!!https://woodworksbyjohn.com/wp-content/uploads/2016/09/handplaned-1.jpghandplaned-1Custom planed piecehttps://woodworksbyjohn.com/wp-content/uploads/2016/09/handplane-1.jpghandplane-1Yeah, a hand plane!2016-09-29T14:28:00+00:00monthlyhttps://woodworksbyjohn.com/2016/09/23/shops-coming-together-lots-of-work/https://woodworksbyjohn.com/wp-content/uploads/2016/09/www-1.jpgwww-1Wrapped, Wired, and Windowedhttps://woodworksbyjohn.com/wp-content/uploads/2016/09/wiring2-1.jpgwiring2-1https://woodworksbyjohn.com/wp-content/uploads/2016/09/westwall4-1.jpgwestwall4-1In place!https://woodworksbyjohn.com/wp-content/uploads/2016/09/westwall3-1.jpgwestwall3-1Top plate cut to span freeze blockhttps://woodworksbyjohn.com/wp-content/uploads/2016/09/westwall2-1.jpgwestwall2-1..... lifted onto slabhttps://woodworksbyjohn.com/wp-content/uploads/2016/09/westwall1-1.jpgwestwall1-1Going up ......https://woodworksbyjohn.com/wp-content/uploads/2016/09/southwallsquared-1.jpgsouthwallsquared-1Carefully squaredhttps://woodworksbyjohn.com/wp-content/uploads/2016/09/southwalldone-1.jpgsouthwalldone-1In place -- yeah!https://woodworksbyjohn.com/wp-content/uploads/2016/09/southwall1-1.jpgsouthwall1-1Framed up outsidehttps://woodworksbyjohn.com/wp-content/uploads/2016/09/openconcept-1.jpgopenconcept-1Open Concept2016-09-24T13:44:38+00:00monthlyhttps://woodworksbyjohn.com/2016/09/12/long-time-coming-in-phoenix-now/https://woodworksbyjohn.com/wp-content/uploads/2016/09/woodshopporch-11.jpgwoodshopporch-1Porch area to be enclosedhttps://woodworksbyjohn.com/wp-content/uploads/2016/09/woodshop-stripped-1.jpgwoodshop-stripped-1Stripped!https://woodworksbyjohn.com/wp-content/uploads/2016/09/woodshopstripped-1.jpgwoodshopstripped-1Down to the https://woodworksbyjohn.com/wp-content/uploads/2016/09/woodshop3-1.jpgwoodshop3-1https://woodworksbyjohn.com/wp-content/uploads/2016/09/woodshop2-1.jpgwoodshop2-1https://woodworksbyjohn.com/wp-content/uploads/2016/09/woodshop1-1.jpgwoodshop1-1https://woodworksbyjohn.com/wp-content/uploads/2016/09/tempbermbowsaw-1.jpgtempbermbowsaw-1Cutting Boardwalkhttps://woodworksbyjohn.com/wp-content/uploads/2016/09/frontyardirrigation-1.jpgfrontyardirrigation-1Front Yard Irrigated, enjoyed by birdshttps://woodworksbyjohn.com/wp-content/uploads/2016/09/backyardirrigation-1.jpgbackyardirrigation-1Backyard, notice my Woodshop!2016-09-13T14:12:54+00:00monthlyhttps://woodworksbyjohn.com/2016/08/14/due-diligence-not-our-buyers-agent/https://woodworksbyjohn.com/wp-content/uploads/2016/08/screen-shot-2016-08-14-at-12-43-01-pm.pngScreen Shot 2016-08-14 at 12.43.01 PMhttps://woodworksbyjohn.com/wp-content/uploads/2016/08/duediligence-2-1.jpgDueDiligence-2 - 1Dining Room and forlorn Cat!https://woodworksbyjohn.com/wp-content/uploads/2016/08/duediligence-1-1.jpgDueDiligence-1 - 1Living Room, Bedroom, Couch, and all!https://woodworksbyjohn.com/wp-content/uploads/2016/08/duediligence-1.jpgDueDiligence - 12016-08-15T11:28:06+00:00monthlyhttps://woodworksbyjohn.com/2016/08/08/packrat-1-packed-2-wednesday/https://woodworksbyjohn.com/wp-content/uploads/2016/08/screen-shot-2016-08-08-at-8-08-09-pm.pngScreen Shot 2016-08-08 at 8.08.09 PMFramed -- Last SCWW Meeting https://woodworksbyjohn.com/wp-content/uploads/2016/08/packrat-3-1.jpgPackRat-3 - 13.) Progress before Lunchhttps://woodworksbyjohn.com/wp-content/uploads/2016/08/packrat-2-1.jpgPackRat-2 - 12.) Positioning off Truckhttps://woodworksbyjohn.com/wp-content/uploads/2016/08/packrat-1-1.jpgPackRat-1 - 11.) Backing onto Driveway2016-08-09T03:22:31+00:00monthlyhttps://woodworksbyjohn.com/2016/07/26/time-flew-packrat-in-my-future/https://woodworksbyjohn.com/wp-content/uploads/2016/07/sgt-e-5-vietnam-1970-1.jpegSgt. E-5 Vietnam 1970 1Made Sgt. June 1970 Marble Mountain Vietnamhttps://woodworksbyjohn.com/wp-content/uploads/2016/07/garagesale-6-1.jpgGarageSale-6 - 1Woodshop?https://woodworksbyjohn.com/wp-content/uploads/2016/07/garagesale-5-1.jpgGarageSale-5 - 1Art Studio?https://woodworksbyjohn.com/wp-content/uploads/2016/07/garagesale-4-1.jpgGarageSale-4 - 1Storage Shed?https://woodworksbyjohn.com/wp-content/uploads/2016/07/garagesale-3-1.jpgGarageSale-3 - 1On the curb, gone in 2 dayshttps://woodworksbyjohn.com/wp-content/uploads/2016/07/garagesale-2-1.jpgGarageSale-2 - 1Plus some more!https://woodworksbyjohn.com/wp-content/uploads/2016/07/garagesale-1-1.jpgGarageSale-1 - 1Sold all clamps to this man2016-07-27T04:12:11+00:00monthlyhttps://woodworksbyjohn.com/2016/06/30/scottsdale-adventure-coming-to-a-close/https://woodworksbyjohn.com/wp-content/uploads/2016/06/scottsdaleframe-9-10-overall-1.jpgScottsdaleFrame 9-10-Overall - 19/10 Frame Completehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/scottsdaleframe-9-10-cornerdetail-1.jpgScottsdaleFrame 9-10-CornerDetail - 19/10 Frame Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/scottsdaleframe-customcarve-cornerdetail-1-1.jpgScottsdaleFrame-CustomCarve-CornerDetail - 1 (1)Completed Framehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/3-oiltoning-lightportlandgrey-1.jpg3-OilToning-LightPortlandGrey - 13.) Blotted on panel for texturehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/2-oiltoning-lightportlandgrey-1.jpg2-OilToning-LightPortlandGrey - 12.) Brushed on then wiped backhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-oiltoning-lightportlandgrey-1.jpg1-OilToning-LightPortlandGrey - 11.) Portland Grey Light & Gamsolhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/scottsdaleadventure-ended-1.jpgScottsdaleAdventure-Ended - 1Ready to go to storage.2016-07-01T21:21:02+00:00monthlyhttps://woodworksbyjohn.com/2016/06/23/last-scottsdale-frame-910-design/https://woodworksbyjohn.com/wp-content/uploads/2016/06/gilding-9-10-frame-1.jpgGilding #9-10 Frame - 1Mostly Gilded --- #9/10 Gougehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/5-layout-9-10-frame-1.jpg5-Layout-9-10 Frame - 11.) Drawn in, radiused with 9/10https://woodworksbyjohn.com/wp-content/uploads/2016/06/4-layout-9-10-frame-1.jpg4-Layout-9-10 Frame - 1https://woodworksbyjohn.com/wp-content/uploads/2016/06/3-layout-9-10-frame-1.jpg3-Layout-9-10 Frame - 13.) Others 3/4" lesshttps://woodworksbyjohn.com/wp-content/uploads/2016/06/3-carving-9-10-frame-1.jpg3-Carving-9-10 Frame - 14.) Grounding out with various #3 gougeshttps://woodworksbyjohn.com/wp-content/uploads/2016/06/2-layout-9-10-frame-1.jpg2-Layout-9-10 Frame - 12.) Longest leg @ 3 1/2"https://woodworksbyjohn.com/wp-content/uploads/2016/06/2-carving-9-10-frame-1.jpg2-Carving-9-10 Frame - 13.) Custom skew for straight cutshttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-layout-9-10-frame-1.jpg1-Layout-9-10 Frame - 11.) Dividers to evenly space elementshttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-carving-9-10-frame-1.jpg1-Carving-9-10 Frame - 12.) Long bent V to separate2016-06-23T22:36:31+00:00monthlyhttps://woodworksbyjohn.com/2016/06/19/gilding-the-final-frame/https://woodworksbyjohn.com/wp-content/uploads/2016/06/spray-shellac-1.jpgSpray Shellac - 1Shellacked https://woodworksbyjohn.com/wp-content/uploads/2016/06/freshly-gilded-1.jpgFreshly Gilded - 1Freshly Gildedhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/carved-sanded-1.jpgCarved-Sanded - 1Carved and Sandedhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/burnisher-sealer-1.jpgBurnisher-Sealer - 1Yellow Burnisher/Sealerhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-layline-pressing-1.jpg1-LayLine-Pressing - 1Pressing hard, right to lefthttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-layline-complete-1.jpg1-LayLine-Complete - 1Donehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-layline-1.jpg1-LayLine - 1Visible over-lap of leaf2016-06-20T14:20:56+00:00monthlyhttps://woodworksbyjohn.com/2016/06/13/final-scottsdale-frame/https://woodworksbyjohn.com/wp-content/uploads/2016/06/screen-shot-2016-06-13-at-2-53-02-pm.pngScreen Shot 2016-06-13 at 2.53.02 PMhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/4-divot-june-2016-frame-1.jpg4-Divot-June-2016 Frame - 14.) Work from both sides, also remove chip at bottomhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/3-transferdesign-june-2016-frame-1.jpg3-TransferDesign-June-2016 Frame - 1Transfer complete, book picture, and practice piecehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/3-divot-june-2016-frame-1.jpg3-Divot-June-2016 Frame - 13.) ....the other, meeting in the middlehttps://woodworksbyjohn.com/wp-content/uploads/2016/06/2-transferdesign-june-2016-frame-1.jpg2-TransferDesign-June-2016 Frame - 1Tracing paper to transfer desinghttps://woodworksbyjohn.com/wp-content/uploads/2016/06/2-round-june-2016-frame-1.jpg2-Round-June-2016 Frame - 12.) Use different size #3 fishtails to round over sectionhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/2-inner-leaf-june-2016-frame-1.jpg2-Inner Leaf-June-2016 Frame - 12.) Model leaf from high to low with #3 & #5https://woodworksbyjohn.com/wp-content/uploads/2016/06/2-divot-june-2016-frame-1.jpg2-Divot-June-2016 Frame - 12.) 8mm chisel to form one side and then ....https://woodworksbyjohn.com/wp-content/uploads/2016/06/1-round-june-2016-frame-1.jpg1-Round-June-2016 Frame - 11.) Use 5F/12mm to outline curve, hand pressure onlyhttps://woodworksbyjohn.com/wp-content/uploads/2016/06/1-inner-leaf-june-2016-frame-1.jpg1-Inner Leaf-June-2016 Frame - 11.) Begins with a long bent 6mm v-tool2016-06-14T02:33:58+00:00monthlyhttps://woodworksbyjohn.com/2016/06/07/woodworkers-withdrawal/https://woodworksbyjohn.com/wp-content/uploads/2016/06/screen-shot-2016-06-07-at-2-09-28-pm.pngScreen Shot 2016-06-07 at 2.09.28 PMWith a view!https://woodworksbyjohn.com/wp-content/uploads/2016/06/screen-shot-2016-06-07-at-2-09-03-pm.pngScreen Shot 2016-06-07 at 2.09.03 PMShop at our new (maybe) home in Phoenix2016-06-08T22:37:18+00:00monthlyhttps://woodworksbyjohn.com/2016/05/30/youre-invited-no-rsvp-required/2016-06-07T11:02:49+00:00monthlyhttps://woodworksbyjohn.com/2016/05/14/picture-frame-carving-tutorial-part-2/https://woodworksbyjohn.com/wp-content/uploads/2016/05/6-modeling-leaf-gilded-1.jpg6-Modeling Leaf-Gilded - 1Composition Gold Leafhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/5-modeling-leaf-burnisher-sealer-1.jpg5-Modeling Leaf-Burnisher-Sealer - 1Burnisher Sealerhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/4-modeling-leaf-sanding-1.jpg4-Modeling Leaf-Sanding - 1Sanding method, not with the grain!https://woodworksbyjohn.com/wp-content/uploads/2016/05/3-modeling-leaf-seperate-1.jpg3-Modeling Leaf-Seperate - 1Separation and Depthhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/2-modeling-leaf-transfer-1.jpg2-Modeling Leaf-Transfer - 1Soft Pencil (4B) to transferhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/1-modeling-leaf-patterns-1.jpg1-Modeling Leaf-Patterns - 1Plastic Pattern (top) Tracing Paper (bottom)2016-10-28T12:04:45+00:00monthlyhttps://woodworksbyjohn.com/2016/05/07/picture-frame-carving-tutorial-you-decide/https://woodworksbyjohn.com/wp-content/uploads/2016/05/screen-shot-2016-05-03-at-9-30-04-am.pngScreen Shot 2016-05-03 at 9.30.04 AMFrame Patternhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/6-frametutorial-proof-detail-1.jpg6-FrameTutorial-Proof-Detail - 1Corner Detail -- needs refinement.https://woodworksbyjohn.com/wp-content/uploads/2016/05/6-frametutorial-proof-1.jpg6-FrameTutorial-Proof - 1Frame so far: 5/7/2016https://woodworksbyjohn.com/wp-content/uploads/2016/05/5-frametutorial-1.jpg5-FrameTutorial - 1Almost donehttps://woodworksbyjohn.com/wp-content/uploads/2016/05/4-frametutorial-skewedspoons-1.jpg4-FrameTutorial-SkewedSpoons - 1#2 Skewed Spoon https://woodworksbyjohn.com/wp-content/uploads/2016/05/3-frametutorial-drawing-1.jpg3-FrameTutorial-Drawing - 1Picture of corner along with template.https://woodworksbyjohn.com/wp-content/uploads/2016/05/2-frametutorial-detail-1.jpg2-FrameTutorial-detail - 1First corner set in and annotated.https://woodworksbyjohn.com/wp-content/uploads/2016/05/2-frametutorial-1.jpg2-FrameTutorial - 1https://woodworksbyjohn.com/wp-content/uploads/2016/05/1a-frametutorial-1.jpg1A-FrameTutorial - 1Materials to get design onto frame.2017-03-02T01:05:07+00:00monthlyhttps://woodworksbyjohn.com/2016/05/01/mary-may-carving-project-rose-lily/https://woodworksbyjohn.com/wp-content/uploads/2016/05/rose-lily-complete-1-11.jpgRose-Lily Complete - 1 (1)Rose & Lily Carving Completehttps://woodworksbyjohn.com/wp-content/uploads/2016/05/outlined-v-tool.jpgOutlined V-tool2.) Outlined with #6 V-Toolhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/lower-background-after-v-tool.jpgLower Background after v-tool3.) Background lowered after outlininghttps://woodworksbyjohn.com/wp-content/uploads/2016/05/lily-done-rose-begun.jpgLily Done, Rose Begun4.) Lily almost complete, Rose begunhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/drawn-on-wood.jpgDrawn on wood1.) Image drawn on woodhttps://woodworksbyjohn.com/wp-content/uploads/2016/05/all-the-help-1.jpgAll the Help - 1Getting all the Help I Can!2016-05-02T14:38:47+00:00monthlyhttps://woodworksbyjohn.com/2016/04/18/final-frame-for-the-show/https://woodworksbyjohn.com/wp-content/uploads/2016/04/shellacked-waterlily-frame-1.jpgShellacked WaterLily Frame - 14.) Frame burnished and shellackedhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/finished-waterlily-frame-stepping-out-1.jpgFinished WaterLily Frame-Stepping Out - 1Stepping Out by: Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/finished-waterlily-frame-1.jpgFinished WaterLily Frame - 15.) Completed frame toned and waxedhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/burnisher-sealer-waterlily-frame-1.jpgBurnisher-Sealer WaterLily Frame - 12.) Frame with yellow burnisher/sealerhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/3-gilding-waterlily-frame-edge-1.jpg3-Gilding WaterLily Frame Edge - 13.) Finishing off frame edgeshttps://woodworksbyjohn.com/wp-content/uploads/2016/04/2-gilding-waterlily-frame-1.jpg2-Gilding WaterLily Frame - 12.) Pressing into carve -- no faulting!https://woodworksbyjohn.com/wp-content/uploads/2016/04/2-gilded-waterlily-frame-1.jpg2-Gilded WaterLily Frame - 13.) Gilded Framehttps://woodworksbyjohn.com/wp-content/uploads/2016/04/1-gilding-waterlily-frame-1.jpg1-Gilding WaterLily Frame - 11.) Initial Lay 2016-04-19T13:53:16+00:00monthlyhttps://woodworksbyjohn.com/2016/04/11/yet-another-frame-in-progress/https://woodworksbyjohn.com/wp-content/uploads/2016/04/waterlily-water-frame-texturedetail-1-1.jpgWaterLily & Water Frame-TextureDetail - 1 (1)Texturinghttps://woodworksbyjohn.com/wp-content/uploads/2016/04/screen-shot-2016-04-11-at-4-14-44-pm.pngScreen Shot 2016-04-11 at 4.14.44 PMStepping Out by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/waterlily-water-frame-separation-of-elements-1.jpgWaterLily & Water Frame-Separation of Elements - 1Leaves Separated https://woodworksbyjohn.com/wp-content/uploads/2016/04/waterlily-water-frame-leaf-modeling-1.jpgWaterLily & Water Frame-Leaf Modeling - 1Modeling the Leafhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/waterlily-water-frame-initialoutline-1.jpgWaterLily & Water Frame-InitialOutline - 1Outline set inhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/waterlily-water-frame-designtransfer-1.jpgWaterLily & Water Frame-DesignTransfer - 1Transferring Designhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/waterlily-water-frame-1.jpgWaterLily & Water Frame - 11.) Completed Carved Frame2016-04-12T08:19:47+00:00monthlyhttps://woodworksbyjohn.com/2016/04/04/accepted-into-fine-woodworking-254/https://woodworksbyjohn.com/wp-content/uploads/2016/04/fwmag.jpegFWMagFine Woodworking Magazine 2016-04-05T15:48:04+00:00monthlyhttps://woodworksbyjohn.com/2016/04/02/modeling-career-vs-woodwork-career/https://woodworksbyjohn.com/wp-content/uploads/2016/04/tulipcarve-routerplane-1-1.jpgTulipCarve-RouterPlane - 1 (1)Lowering the Backgroundhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/tulipcarve-inprogress-1.jpgTulipCarve-InProgress - 1Note the graininess -- aggravating!https://woodworksbyjohn.com/wp-content/uploads/2016/04/tulipcarve-complete-1.jpgTulipCarve-Complete - 1Tulip Carving on Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2016/04/tulipcarve-backgroundout-1.jpgTulipCarve-BackgroundOut - 1Figuring out levels of the carvehttps://woodworksbyjohn.com/wp-content/uploads/2016/04/screen-shot-2016-03-01-at-7-23-36-am.pngScreen Shot 2016-03-01 at 7.23.36 AMPinterest Picture2016-04-02T18:25:05+00:00monthlyhttps://woodworksbyjohn.com/2016/03/22/as-others-saw-me-2/https://woodworksbyjohn.com/wp-content/uploads/2016/03/sun-davidkassan-day2-1.jpgSun-DavidKassan-Day2 - 1David Kassan Workshop Day Twohttps://woodworksbyjohn.com/wp-content/uploads/2016/03/sat-davidkassan-day1-1.jpgSat-DavidKassan-Day1 - 1David Kassan Workshop Day Onehttps://woodworksbyjohn.com/wp-content/uploads/2016/03/mon-davidkassan-day3-1.jpgMon-DavidKassan-Day3 - 1David Kassan Workshop Completehttps://woodworksbyjohn.com/wp-content/uploads/2016/03/davidkassan-drawingworkshop-student6-1.jpgDavidKassan-DrawingWorkshop-Student6 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/davidkassan-drawingworkshop-student5-1.jpgDavidKassan-DrawingWorkshop-Student5 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/davidkassan-drawingworkshop-student4-1.jpgDavidKassan-DrawingWorkshop-Student4 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/davidkassan-drawingworkshop-student3-1.jpgDavidKassan-DrawingWorkshop-Student3 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/davidkassan-drawingworkshop-student2-1.jpgDavidKassan-DrawingWorkshop-Student2 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/davidkassan-drawingworkshop-student1-1.jpgDavidKassan-DrawingWorkshop-Student1 - 12016-04-01T00:02:20+00:00monthlyhttps://woodworksbyjohn.com/2016/03/11/inspiration-for-a-frame-design/https://woodworksbyjohn.com/wp-content/uploads/2016/03/bougainvillea-leaf-frame-process-1.jpgBougainvillea Leaf Frame-Process - 1Notes, patterns, tools https://woodworksbyjohn.com/wp-content/uploads/2016/03/bougainvillea-leaf-frame-inspiration-1.jpgBougainvillea Leaf Frame-Inspiration - 1Inspiration & First Resulthttps://woodworksbyjohn.com/wp-content/uploads/2016/03/screen-shot-2016-03-10-at-4-27-11-pm.pngScreen Shot 2016-03-10 at 4.27.11 PMBougainvillea Leafhttps://woodworksbyjohn.com/wp-content/uploads/2016/03/bougainvillea-leaf-frame-sealer-1.jpgBougainvillea Leaf Frame-Sealer - 1Ready for the Gold!https://woodworksbyjohn.com/wp-content/uploads/2016/03/bougainvillea-leaf-frame-nudepainting-1.jpgBougainvillea Leaf Frame-NudePainting - 1Painting by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2016/03/bougainvillea-leaf-frame-inprogress-1.jpgBougainvillea Leaf Frame-InProgress - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/4-bougainvillea-leaf-frame-cornerenhancement-1.jpg4-Bougainvillea Leaf Frame-CornerEnhancement - 14.) Sanded and ready for gildhttps://woodworksbyjohn.com/wp-content/uploads/2016/03/3-bougainvillea-leaf-frame-pattern-1.jpg3-Bougainvillea Leaf Frame-Pattern - 13.) Transfer paper for inner detailshttps://woodworksbyjohn.com/wp-content/uploads/2016/03/3-bougainvillea-leaf-frame-cornerenhancement-1.jpg3-Bougainvillea Leaf Frame-CornerEnhancement - 13.) Carefully cut with #9https://woodworksbyjohn.com/wp-content/uploads/2016/03/2-bougainvillea-leaf-frame-pattern-1.jpg2-Bougainvillea Leaf Frame-Pattern - 12.) then the bottom edge2016-03-12T00:08:39+00:00monthlyhttps://woodworksbyjohn.com/2016/03/03/faux-sgraffito/https://woodworksbyjohn.com/wp-content/uploads/2016/03/sgraffito-frame-detail-1.jpgSgraffito Frame Detail - 1Faux Sgraffito Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2016/03/sgraffito-frame-12x16-1.jpgSgraffito Frame 12x16 - 1Faux Sgraffito 12" x 16"https://woodworksbyjohn.com/wp-content/uploads/2016/03/screen-shot-2016-03-03-at-6-48-18-am.pngScreen Shot 2016-03-03 at 6.48.18 AMCJ Frames Sgraffito Framehttps://woodworksbyjohn.com/wp-content/uploads/2016/03/3-fauxsgraffitto-leafing-1.jpg3-FauxSgraffitto-Leafing - 1Acceptably laid leafhttps://woodworksbyjohn.com/wp-content/uploads/2016/03/3-fauxsgraffitto-design-1.jpg3-FauxSgraffitto-Design - 1Sausages on the Sight Edgehttps://woodworksbyjohn.com/wp-content/uploads/2016/03/2-fauxsgraffitto-leafing-1.jpg2-FauxSgraffitto-Leafing - 1Again at panel/banding intersectionhttps://woodworksbyjohn.com/wp-content/uploads/2016/03/2-fauxsgraffitto-design-1.jpg2-FauxSgraffitto-Design - 1Watch the chip!https://woodworksbyjohn.com/wp-content/uploads/2016/03/1-fauxsgraffitto-leafing-1.jpg1-FauxSgraffitto-Leafing - 1Cardboard piece to get into recesshttps://woodworksbyjohn.com/wp-content/uploads/2016/03/1-fauxsgraffitto-design-1.jpg1-FauxSgraffitto-Design - 1Templates and Long Bent V-tool2021-09-22T21:47:24+00:00monthlyhttps://woodworksbyjohn.com/2016/03/01/artist-model-for-rose-frantzen/https://woodworksbyjohn.com/wp-content/uploads/2016/03/sas-2-28-f-1.jpgSAS 2-28-f - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/sas-2-28-e-1.jpgSAS 2-28-e - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/sas-2-28-d-1.jpgSAS 2-28-d - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/sas-2-28-c-1.jpgSAS 2-28-c - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/sas-2-28-b-1.jpgSAS 2-28-b - 1https://woodworksbyjohn.com/wp-content/uploads/2016/03/sas-2-28-a-1.jpgSAS 2-28-a - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/sas-2-27-i-1.jpgSAS 2-27-i - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/sas-2-27-h-1.jpgSAS 2-27-h - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/sas-2-27-g-1.jpgSAS 2-27-g - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/sas-2-27-f-1.jpgSAS 2-27-f - 12016-03-03T14:05:22+00:00monthlyhttps://woodworksbyjohn.com/2016/02/26/flower-nouveau-complete/https://woodworksbyjohn.com/wp-content/uploads/2016/02/flower-nuoveau-wax-and-buff-1.jpgFlower Nuoveau-Wax and Buff - 1Waxed and buffedhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/flower-nuoveau-ticket-to-ride-1.jpgFlower Nuoveau-Ticket to Ride - 1Ticket to Ridehttps://woodworksbyjohn.com/wp-content/uploads/2016/02/flower-nuoveau-shellaconly-1.jpgFlower Nuoveau-ShellacOnly - 1Gilded and shellacked onlyhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/flower-nuoveau-casein-1.jpgFlower Nuoveau-Casein - 1Casein applied & wiped backhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/flower-nouveau-cornerdetail-1.jpgFlower Nouveau-CornerDetail - 1Flower Nouveau Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/flower-nouveau-1.jpgFlower Nouveau - 1Flower Nouveau 16 "x 20"2016-02-27T05:46:21+00:00monthlyhttps://woodworksbyjohn.com/2016/02/19/scottsdale-frame-4-flower-nouveau/https://woodworksbyjohn.com/wp-content/uploads/2016/02/4-flowernouveau-patterns-pictureframe-1.jpg4-FlowerNouveau-Patterns-PictureFrame - 14.) Holes for leaf junctionshttps://woodworksbyjohn.com/wp-content/uploads/2016/02/3-flowernouveau-patterns-pictureframe-11.jpg3-FlowerNouveau-Patterns-PictureFrame - 13.) Flip to locate on other leghttps://woodworksbyjohn.com/wp-content/uploads/2016/02/2-flowernouveau-patterns-pictureframe-11.jpg2-FlowerNouveau-Patterns-PictureFrame - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/screen-shot-2016-02-19-at-5-34-46-pm.pngScreen Shot 2016-02-19 at 5.34.46 PMInspiration and Modificationhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/flowernouveau-burnished-pictureframe-1-1.jpgFlowerNouveau-Burnished-PictureFrame - 1 (1)Flower Nouveau Framehttps://woodworksbyjohn.com/wp-content/uploads/2016/02/5-flowernouveau-patterns-pictureframe-1.jpg5-FlowerNouveau-Patterns-PictureFrame - 15.) Getting "into the work"!https://woodworksbyjohn.com/wp-content/uploads/2016/02/3-templates-scottsdaleframe4-woodworksbyjohn-11.jpg3-Templates-ScottsdaleFrame4-WoodworksbyJohn - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/2-flowernouveau-patterns-pictureframe-1.jpg2-FlowerNouveau-Patterns-PictureFrame - 12.) Locate edges one leghttps://woodworksbyjohn.com/wp-content/uploads/2016/02/1-flowernouveau-patterns-pictureframe-1.jpg1-FlowerNouveau-Patterns-PictureFrame - 11.) Four templates neededhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/4-templates-scottsdaleframe4-woodworksbyjohn-1.jpg4-Templates-ScottsdaleFrame4-WoodworksbyJohn - 14.) Long bent chisels work well here2016-02-20T04:35:28+00:00monthlyhttps://woodworksbyjohn.com/2016/02/15/waterleaf-frame-complete-next/https://woodworksbyjohn.com/wp-content/uploads/2016/02/waterleafframe-woodworksbyjohn-1.jpgWaterLeafFrame-WoodworksbyJohn - 1Waterleaf Frame 16"x20"https://woodworksbyjohn.com/wp-content/uploads/2016/02/waterleafframe-cornerdetail-woodworksbyjohn-1.jpgWaterLeafFrame-CornerDetail-WoodworksbyJohn - 1Waterleaf Corner Detailhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/scottsdaleframe4-woodworksbyjohn-1.jpgScottsdaleFrame4-WoodworksbyJohn - 1End of the Day2016-02-16T14:33:18+00:00monthlyhttps://woodworksbyjohn.com/2016/02/12/as-others-saw-me/https://woodworksbyjohn.com/wp-content/uploads/2016/02/scottsdaleartistschool-portrait-michaelsiegel-workshop-1.jpgScottsdaleArtistSchool-Portrait-MichaelSiegel-Workshop - 1Michael Siegels Demo https://woodworksbyjohn.com/wp-content/uploads/2016/02/class-sas.jpgclass-sasMichael Siegel Workshophttps://woodworksbyjohn.com/wp-content/uploads/2016/02/7-scottsdaleartistschool-portrait-1.jpg7-ScottsdaleArtistSchool-Portrait - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/6-scottsdaleartistschool-portrait-1.jpg6-ScottsdaleArtistSchool-Portrait - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/5-scottsdaleartistschool-portrait-1.jpg5-ScottsdaleArtistSchool-Portrait - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/4-scottsdaleartistschool-portrait-1.jpg4-ScottsdaleArtistSchool-Portrait - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/3-scottsdaleartistschool-portrait-1.jpg3-ScottsdaleArtistSchool-Portrait - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/2-scottsdaleartistschool-portrait-1.jpg2-ScottsdaleArtistSchool-Portrait - 1https://woodworksbyjohn.com/wp-content/uploads/2016/02/1-scottsdaleartistschool-portrait-1.jpg1-ScottsdaleArtistSchool-Portrait - 12016-02-13T13:54:04+00:00monthlyhttps://woodworksbyjohn.com/2016/02/09/waterleaf-molding-gilded/https://woodworksbyjohn.com/wp-content/uploads/2016/02/leaflayer-compositiongoldleaf-woodworksbyjohn-1.jpgLeafLayer-CompositionGoldLeaf-WoodworksbyJohn - 1Leaf Layerhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/framecomplete-compositiongoldleaf-woodworksbyjohn-1.jpgFrameComplete-CompositionGoldLeaf-WoodworksbyJohn - 1Freshly Gilded Frame: Waterleaf Carvedhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/2-layingcompositiongoldleaf-woodworksbyjohn-1.jpg2-LayingCompositionGoldLeaf-WoodworksbyJohn - 1Final Pressing of the Leafhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/1-layingcompositiongoldleaf-woodworksbyjohn-1.jpg1-LayingCompositionGoldLeaf-WoodworksbyJohn - 1Removing skewings with blush brush2016-02-10T13:50:33+00:00monthlyhttps://woodworksbyjohn.com/2016/02/06/waterleaf-molding-exercise-in-repetition/https://woodworksbyjohn.com/wp-content/uploads/2016/02/waterleaf-woodworksbyjohn-1.jpgWaterleaf-WoodworksbyJohn - 1Sample Piece and Frame to Behttps://woodworksbyjohn.com/wp-content/uploads/2016/02/secondary-leaves-waterleaf-woodworksbyjohn-1.jpgSecondary leaves-Waterleaf-WoodworksbyJohn - 1Secondary Leaveshttps://woodworksbyjohn.com/wp-content/uploads/2016/02/2-upper-leaves-waterleaf-woodworksbyjohn-1.jpg2- Upper leaves-Waterleaf-WoodworksbyJohn - 1Forming the dividehttps://woodworksbyjohn.com/wp-content/uploads/2016/02/1-upper-leaves-waterleaf-woodworksbyjohn-1.jpg1- Upper leaves-Waterleaf-WoodworksbyJohn - 1Initial Stab cut to separate leaveshttps://woodworksbyjohn.com/wp-content/uploads/2016/02/2-leaves-waterleaf-woodworksbyjohn-11.jpg2-Leaves-Waterleaf-WoodworksbyJohn - 12.) Removing crescent shaped piecehttps://woodworksbyjohn.com/wp-content/uploads/2016/02/2-leaves-waterleaf-woodworksbyjohn-1-1.jpg2-Leaves-Waterleaf-WoodworksbyJohn - 1 (1)3.) Resultshttps://woodworksbyjohn.com/wp-content/uploads/2016/02/1-leaves-waterleaf-woodworksbyjohn-1.jpg1-Leaves-Waterleaf-WoodworksbyJohn - 11.) Cutting both sides of leafhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/2-eyes-waterleaf-woodworksbyjohn-1.jpg2-Eyes-Waterleaf-WoodworksbyJohn - 1Flatten torn fibers with modified nail sethttps://woodworksbyjohn.com/wp-content/uploads/2016/02/1-eyes-waterleaf-woodworksbyjohn-1.jpg1-Eyes-Waterleaf-WoodworksbyJohn - 1First outline with #9/3mm, pop out circlehttps://woodworksbyjohn.com/wp-content/uploads/2016/02/5-layout-waterleaf-woodworksbyjohn-1.jpg5-Layout-Waterleaf-WoodworksbyJohn - 15.) Carefully mark "what's what"!2016-02-07T02:17:41+00:00monthlyhttps://woodworksbyjohn.com/2016/02/03/share-the-completed-frames/https://woodworksbyjohn.com/wp-content/uploads/2016/02/cornerleafmotif-detail.jpgCornerLeafMotif-DetailCorner Leaf Motif Detailhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/cornerleafmotif.jpgCornerLeafMotifCorner Leaf Motif 8" x 10"https://woodworksbyjohn.com/wp-content/uploads/2016/02/celticknotframe-woodworksbyjohn-gilding-4.jpgCelticKnotFrame-WoodworksbyJohn-Gilding-44.) Tamping/rubbng down into sizehttps://woodworksbyjohn.com/wp-content/uploads/2016/02/celticknotframe-woodworksbyjohn-gilding-3-1.jpgCelticKnotFrame-WoodworksbyJohn-Gilding-3 - 13.) Brushing off scraps (Diane's old blush brush!)https://woodworksbyjohn.com/wp-content/uploads/2016/02/celticknotframe-woodworksbyjohn-gilding-2-1.jpgCelticKnotFrame-WoodworksbyJohn-Gilding-2 - 12.) Pressing in with a minimum of faultinghttps://woodworksbyjohn.com/wp-content/uploads/2016/02/celticknotframe-woodworksbyjohn-gilding-1-1.jpgCelticKnotFrame-WoodworksbyJohn-Gilding-1 - 11.) Laying from top to bottomhttps://woodworksbyjohn.com/wp-content/uploads/2016/02/celticknot-detail.jpgCelticKnot-DetailCustom Frame #4https://woodworksbyjohn.com/wp-content/uploads/2016/02/celticknot.jpgCelticKnotCeltic Knot 14" x 18"2016-02-04T02:43:18+00:00monthlyhttps://woodworksbyjohn.com/2016/01/28/new-picture-frame-celtic-knot/https://woodworksbyjohn.com/wp-content/uploads/2016/01/screen-shot-2016-01-23-at-3-13-42-pm.pngScreen Shot 2016-01-23 at 3.13.42 PMProfilehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-practice-1.jpgCelticKnotFrame-WoodworksbyJohn-Practice - 1Celtic Knot Practicehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-pattern-2-1.jpgCelticKnotFrame-WoodworksbyJohn-Pattern-2 - 1Scissors easily cut curves, rotate pattern while cuttinghttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-pattern-1-1.jpgCelticKnotFrame-WoodworksbyJohn-Pattern-1 - 1Inside cuts with gouges, notch sharp cornershttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-carving-almost-1.jpgCelticKnotFrame-WoodworksbyJohn-Carving-Almost - 14.) Completed knot, notice how deep the sides arehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-carving-3-1.jpgCelticKnotFrame-WoodworksbyJohn-Carving-3 - 13.) then finer shaving to smooth interiorhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-carving-2-1.jpgCelticKnotFrame-WoodworksbyJohn-Carving-2 - 12.) Skewed spoon initial cuthttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-carving-1-1.jpgCelticKnotFrame-WoodworksbyJohn-Carving-1 - 11.) Removal of inside after outline cutshttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknot-woodworksbyjohn-layout-1-1.jpgCelticKnot-WoodworksbyJohn-LayOut-1 - 1Ready to start2016-02-03T23:26:15+00:00monthlyhttps://woodworksbyjohn.com/2016/01/26/short-follow-up-on-leaf-motif-frame/https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafmotif-steelwool-shellaked-woodworksbyjohn-1.jpgCornerLeafMotif-SteelWool-Shellaked-WoodworksbyJohn - 1Knock-down then Shellachttps://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafmotif-gilded-woodworksbyjohn-1.jpgCornerLeafMotif-Gilded-WoodworksbyJohn - 1Gilded Onlyhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/celticknotframe-woodworksbyjohn-1.jpgCelticKnotFrame-WoodworksbyJohn - 1Celtic Knot Frame 14" x 18"2016-01-29T15:45:26+00:00monthlyhttps://woodworksbyjohn.com/2016/01/23/gold-on-the-leaf-motif-frame/https://woodworksbyjohn.com/wp-content/uploads/2016/01/screen-shot-2016-01-23-at-3-12-59-pm.pngScreen Shot 2016-01-23 at 3.12.59 PMMolding Profilehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/notidealsizingsituation-1.jpgNotIdealSizingSituation - 1Sizing Studio?https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafframe-woodworksbyjohn-gilded-soitbegins-1.jpgCornerLeafFrame-WoodworksbyJohn-Gilded-SoItBegins - 1On the Way!https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafframe-woodworksbyjohn-gilded-cornerdetail-1.jpgCornerLeafFrame-WoodworksbyJohn-Gilded-CornerDetail - 1Close Up of Gilded Cornerhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafframe-woodworksbyjohn-gilded-1.jpgCornerLeafFrame-WoodworksbyJohn-Gilded - 12016-01-24T01:56:12+00:00monthlyhttps://woodworksbyjohn.com/2016/01/19/first-scottsdale-adventure-picture-frame/https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafframe-woodworksbyjohn-design-initialcarve-1.jpgCornerLeafFrame-WoodworksbyJohn-Design-InitialCarve - 1https://woodworksbyjohn.com/wp-content/uploads/2016/01/template-modeling-cornerleafframe-woodworksbyjohn-1.jpgTemplate-Modeling-CornerLeafFrame-WoodworksbyJohn - 1In Progresshttps://woodworksbyjohn.com/wp-content/uploads/2016/01/template-firstcuts-cornerleafframe-woodworksbyjohn-1.jpgTemplate-FirstCuts-CornerLeafFrame-WoodworksbyJohn - 1https://woodworksbyjohn.com/wp-content/uploads/2016/01/template-centerboss-cornerleafframe-woodworksbyjohn-1.jpgTemplate-CenterBoss-CornerLeafFrame-WoodworksbyJohn - 1Center Boss in corners of framehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/template-3-cornerleafframe-woodworksbyjohn-1.jpgTemplate-3-CornerLeafFrame-WoodworksbyJohn - 13.) Completed ribbon through covehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/template-2-cornerleafframe-woodworksbyjohn-1.jpgTemplate-2-CornerLeafFrame-WoodworksbyJohn - 12.) After drawing diagonal, draw in the widthhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/template-1-cornerleafframe-woodworksbyjohn-1.jpgTemplate-1-CornerLeafFrame-WoodworksbyJohn - 11.) Rest template against bottom for alignment, flip to other sidehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafframe-woodworksbyjohn-clayedup-1-1.jpgCornerLeafFrame-WoodworksbyJohn-ClayedUp - 1 (1)Clayed Up & Ready for Gold!2016-01-24T00:24:55+00:00monthlyhttps://woodworksbyjohn.com/2016/01/14/more-than-one-way-to-skin-a-cat/https://woodworksbyjohn.com/wp-content/uploads/2016/01/morethanonewaytoskinacat-1.jpgMoreThanOneWaytoSkinaCat - 1Ali checking it out!https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornermotif-woodworksbyjohn-1-1.jpgCornerMotif-WoodworksbyJohn-1 - 1Corner Motif #1https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafmotif-woodworksbyjohn-actual-molding-1.jpgCornerLeafMotif-WoodworksbyJohn-Actual Molding - 1Molding Profilehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafmotif-woodworksbyjohn-4-1.jpgCornerLeafMotif-WoodworksbyJohn-4? - 1Frame to Be!https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafmotif-woodworksbyjohn-3-1.jpgCornerLeafMotif-WoodworksbyJohn-3 - 1Corner Motif #3https://woodworksbyjohn.com/wp-content/uploads/2016/01/cornerleafmotif-woodworksbyjohn-2-1.jpgCornerLeafMotif-WoodworksbyJohn-2 - 1Corner Motif #2https://woodworksbyjohn.com/wp-content/uploads/2016/01/3-20-chisel-woodworksbyjohn-sharpeningsequence-5-1.jpg3-20 Chisel-WoodworksbyJohn-SharpeningSequence-5 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/01/3-20-chisel-woodworksbyjohn-sharpeningsequence-4-1.jpg3-20 Chisel-WoodworksbyJohn-SharpeningSequence-4 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/01/3-20-chisel-woodworksbyjohn-sharpeningsequence-3-1.jpg3-20 Chisel-WoodworksbyJohn-SharpeningSequence-3 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/01/3-20-chisel-woodworksbyjohn-sharpeningsequence-2-1.jpg3-20 Chisel-WoodworksbyJohn-SharpeningSequence-2 - 12016-01-15T03:43:40+00:00monthlyhttps://woodworksbyjohn.com/2016/01/11/rosettepatera-final-post/https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-rosette-patera-thirdattempt-1.jpgWoodworksbyJohn-Rosette-Patera-ThirdAttempt - 1Rosette #3https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-rosette-patera-secondattempt-1.jpgWoodworksbyJohn-Rosette-Patera-SecondAttempt - 1Rosette #2https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-rosette-patera-firstattempt-1.jpgWoodworksbyJohn-Rosette-Patera-FirstAttempt - 1Rosette #1https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-innerpetalscoop-4-1.jpgWoodworksbyJohn-InnerPetalScoop-4 - 14.) Piece removed, scoop remains!https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-innerpetalscoop-3-1.jpgWoodworksbyJohn-InnerPetalScoop-3 - 13.) Slicing cut from opposite side, slide gouge up centerlinehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-innerpetalscoop-2-1.jpgWoodworksbyJohn-InnerPetalScoop-2 - 12.) Slicing cut with #5 towards center from one sidehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-innerpetalscoop-1-1.jpgWoodworksbyJohn-InnerPetalScoop-1 - 11.) Problem area -- the scoophttps://woodworksbyjohn.com/wp-content/uploads/2016/01/rosette-patera-woodworksbyjohn-2-1.jpgRosette-Patera-WoodworksbyJohn-2 - 1Effects of the Light #2https://woodworksbyjohn.com/wp-content/uploads/2016/01/rosette-patera-woodworksbyjohn-1-1.jpgRosette-Patera-WoodworksbyJohn-1 - 1Effects of the Light #12016-01-12T19:01:50+00:00monthlyhttps://woodworksbyjohn.com/2016/01/08/some-issues-problems-but-also-some-solutions/https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-ramshorntable-1.jpgCarved Ram's Horn Table Big Leaf Maple and Chakte Kokhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-sharpening-4-1.jpgWoodworksbyJohn-ScottsdaleAdventure-sharpening-4 - 14.) Proof is in the shaving!https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-sharpening-3-1.jpgWoodworksbyJohn-ScottsdaleAdventure-sharpening-3 - 13.) Comparison of other #5, notice the facetshttps://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-sharpening-2-1.jpgWoodworksbyJohn-ScottsdaleAdventure-sharpening-2 - 12.) Progress is being made!https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-sharpening-1-1.jpgWoodworksbyJohn-ScottsdaleAdventure-sharpening-1 - 11.) Rough Stone to correct bevel https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-rocklerled-1.jpgWoodworksbyJohn-ScottsdaleAdventure-RocklerLED - 1Rockler LED Shop Lighthttps://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-ledlight-2.jpgWoodworksbyJohn-ScottsdaleAdventure-LEDLight - 2Rockler LED Addedhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-scottsdaleadventure-firstlight-1.jpgWoodworksbyJohn-ScottsdaleAdventure-FirstLight - 1Original Light Set-up2016-01-08T23:24:37+00:00monthlyhttps://woodworksbyjohn.com/2016/01/06/always-learning-thats-a-good-thing/https://woodworksbyjohn.com/wp-content/uploads/2016/01/woodworksbyjohn-frame-bow-saw-1.jpgWoodworksbyJohn-Frame-Bow Saw - 1Cutting on the Balconyhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/scottsdaleadventure-woodworksbyjohn-shortenbench-3-1.jpgScottsdaleAdventure-WoodworksbyJohn-ShortenBench-3 - 1Surprisingly accuratehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/scottsdaleadventure-woodworksbyjohn-shortenbench-2-1.jpgScottsdaleAdventure-WoodworksbyJohn-ShortenBench-2 - 1Relaxed grip, following both lines as anglehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/scottsdaleadventure-woodworksbyjohn-shortenbench-1-1.jpgScottsdaleAdventure-WoodworksbyJohn-ShortenBench-1 - 1Carefully measuring and marking from bottomhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/scottsdaleadventure-woodworksbyjohn-day2-1.jpgScottsdaleAdventure-WoodworksbyJohn-Day2 - 1Completed Rosette, first Scottsdale projecthttps://woodworksbyjohn.com/wp-content/uploads/2016/01/scottsdaleadventure-woodworksbyjohn-ali-day2-1.jpgScottsdaleAdventure-WoodworksbyJohn-Ali-Day2 - 1My buddy Ali -- day 2!https://woodworksbyjohn.com/wp-content/uploads/2016/01/rosetteday1-1.jpgRosetteDay1 - 1End of first days work on Rosettehttps://woodworksbyjohn.com/wp-content/uploads/2016/01/rosette-layout-1.jpgRosette Layout - 1Somewhat involved, geometric layouthttps://woodworksbyjohn.com/wp-content/uploads/2016/01/commited-now-1.jpgCommited Now - 1I'm committed now -- no turning back!https://woodworksbyjohn.com/wp-content/uploads/2016/01/aliday1-1-1.jpgAliDay1 - 1 (1)My buddy -- Ali2016-01-06T16:30:53+00:00monthlyhttps://woodworksbyjohn.com/2016/01/03/settling-in-to-scottsdale/https://woodworksbyjohn.com/wp-content/uploads/2016/01/workspace-woodworksbyjohn-scottsdaleadventure-4-1.jpgWorkSpace-WoodworksbyJohn-ScottsdaleAdventure-4 - 1Assembled frames in Diane's closethttps://woodworksbyjohn.com/wp-content/uploads/2016/01/workspace-woodworksbyjohn-scottsdaleadventure-3-1.jpgWorkSpace-WoodworksbyJohn-ScottsdaleAdventure-3 - 1Storage area off balconyhttps://woodworksbyjohn.com/wp-content/uploads/2016/01/workspace-woodworksbyjohn-scottsdaleadventure-2-1.jpgWorkSpace-WoodworksbyJohn-ScottsdaleAdventure-2 - 1https://woodworksbyjohn.com/wp-content/uploads/2016/01/workspace-woodworksbyjohn-scottsdaleadventure-1-1.jpgWorkSpace-WoodworksbyJohn-ScottsdaleAdventure-1 - 1Ready to make some chips!https://woodworksbyjohn.com/wp-content/uploads/2016/01/brandy-ali-scottsdale-1.jpgBrandy-Ali Scottsdale - 1Chilling on the couch, Brandy and Ali2016-01-04T20:31:33+00:00monthlyhttps://woodworksbyjohn.com/2015/12/31/20th-anniversary-scottsdale-trip-update/https://woodworksbyjohn.com/wp-content/uploads/2015/12/living-room-1.jpgLiving Room - 1https://woodworksbyjohn.com/wp-content/uploads/2015/12/trailer2-1.jpgTrailer2 - 1.... sure hope not!https://woodworksbyjohn.com/wp-content/uploads/2015/12/trailer1-1.jpgTrailer1 - 1Did we forget anything?https://woodworksbyjohn.com/wp-content/uploads/2015/12/ikea-before-1.jpgIKEA before - 1Ikea before and .....https://woodworksbyjohn.com/wp-content/uploads/2015/12/ikea-after-1.jpgIKEA after - 1.... after. How do those Swedes do it?https://woodworksbyjohn.com/wp-content/uploads/2015/12/convoy-1.jpgConvoy - 1Eugster Convoy to Scottsdale 2016-01-04T00:25:55+00:00monthlyhttps://woodworksbyjohn.com/2015/12/21/scottsdale-8-days-and-counting/https://woodworksbyjohn.com/wp-content/uploads/2015/12/screen-shot-2015-12-21-at-4-10-37-pm.pngScreen Shot 2015-12-21 at 4.10.37 PMhttps://woodworksbyjohn.com/wp-content/uploads/2015/12/scottsdaleadventure-woodworksbyjohn-frames-2-1.jpgScottsdaleAdventure-WoodworksbyJohn-frames-2 - 1.... and small!https://woodworksbyjohn.com/wp-content/uploads/2015/12/scottsdaleadventure-woodworksbyjohn-frames-1-1.jpgScottsdaleAdventure-WoodworksbyJohn-frames-1 - 1Frames ready --- large...https://woodworksbyjohn.com/wp-content/uploads/2015/12/cherryframe2b-roughstock-woodworksbyjohn-1.jpgCherryFrame2B-roughstock-WoodworksbyJohn - 1Nice Piece -- 4/4 and 12+" wide https://woodworksbyjohn.com/wp-content/uploads/2015/12/cherryframe2b-profile-woodworksbyjohn-1-e1450751909764.jpgCherryFrame2B-profile-WoodworksbyJohn - 1Profilehttps://woodworksbyjohn.com/wp-content/uploads/2015/12/cherryframe2b-assembled-woodworksbyjohn-1.jpgCherryFrame2B-assembled-WoodworksbyJohn - 1Glued up and almost donehttps://woodworksbyjohn.com/wp-content/uploads/2015/12/cherryframe2b-addingthickness-woodworksbyjohn-1.jpgCherryFrame2B-addingthickness-WoodworksbyJohn - 1Lower band ready for assembly2015-12-22T15:16:30+00:00monthlyhttps://woodworksbyjohn.com/2015/12/14/la-nina-mariachi-frame-complete/https://woodworksbyjohn.com/wp-content/uploads/2015/12/woodworksbyjohn-laninamariachi-dianeeugster-texturedetail-1.jpgWoodworksbyJohn-LaNinaMariachi-DianeEugster-TextureDetail - 1https://woodworksbyjohn.com/wp-content/uploads/2015/12/woodworksbyjohn-laninamariachi-dianeeugster-fullview-1.jpgWoodworksbyJohn-LaNinaMariachi-DianeEugster-FullView - 1La Nina Mariachi by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2015/12/woodworksbyjohn-laninamariachi-dianeeugster-carvedetail-1.jpgWoodworksbyJohn-LaNinaMariachi-DianeEugster-CarveDetail - 1F-Hole and texture detail2015-12-15T06:48:11+00:00monthlyhttps://woodworksbyjohn.com/2015/12/06/artist-wet-canvaspanel-carrier/https://woodworksbyjohn.com/wp-content/uploads/2015/12/pameldetail-woodworksbyjohn-panel-carrier-1.jpgPamelDetail-WoodworksbyJohn-Panel Carrier - 1Carrier holding 1/4" panelhttps://woodworksbyjohn.com/wp-content/uploads/2015/12/overall3-woodworksbyjohn-panel-carrier-1.jpgOverall3-WoodworksbyJohn-Panel Carrier - 1Wet Panel/Canvas Carrier by Johnhttps://woodworksbyjohn.com/wp-content/uploads/2015/12/overall2-woodworksbyjohn-panel-carrier-1.jpgOverall2-WoodworksbyJohn-Panel Carrier - 1Panel and Canvas held securely https://woodworksbyjohn.com/wp-content/uploads/2015/12/handle-detail-woodworksbyjohn-panel-carrier-1.jpgHandle Detail-WoodworksbyJohn-Panel Carrier - 1Handle Detailhttps://woodworksbyjohn.com/wp-content/uploads/2015/12/canvasdetail-woodworksbyjohn-panel-carrier-1.jpgCanvasDetail-WoodworksbyJohn-Panel Carrier - 1Carrier holding standard canvas2019-01-11T02:19:16+00:00monthlyhttps://woodworksbyjohn.com/2015/11/29/current-work-tropical-walnut-picture-frame/https://woodworksbyjohn.com/wp-content/uploads/2015/11/laninalr.jpglaNinaLRhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/img_2133.jpgIMG_2133In the Sunlighthttps://woodworksbyjohn.com/wp-content/uploads/2015/11/dsc04640.jpgDSC04640F-Hole Patternhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/dsc04638.jpgDSC04638Work in Progresshttps://woodworksbyjohn.com/wp-content/uploads/2015/11/dsc04637.jpgDSC04637Initial Curves with #8, then V-toolhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/dsc04634.jpgDSC04634Grounding out with various #3 gougeshttps://woodworksbyjohn.com/wp-content/uploads/2015/11/dsc04631.jpgDSC04631In Place on one leg2015-12-02T21:25:16+00:00monthlyhttps://woodworksbyjohn.com/2015/11/22/shop-happenings-a-sawstop-trick/https://woodworksbyjohn.com/wp-content/uploads/2015/11/computergrommet2.jpgComputerGrommetComputer Cord Grommethttps://woodworksbyjohn.com/wp-content/uploads/2015/11/sawstop-slidingtable-square-11.jpgSawStop-SlidingTable-Square-1Viewed from front of sawhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/sawstop-slidingtable-square-2.jpgSawStop-SlidingTable-Square-2Viewed from side of saw2015-11-23T00:28:33+00:00monthlyhttps://woodworksbyjohn.com/2015/11/19/change-in-focus-picture-frames-carving-gilding/https://woodworksbyjohn.com/wp-content/uploads/2015/11/largemoldings-solved.jpgLargeMoldings-SolvedCinder clock to keep frame flathttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframe-woodworksbyjohn-lasvegas.jpgCustomPictureFrame-WoodworksbyJohn-LasVegasClose-Up of Custom Cornerhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-tablesawmiterjig-2.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-TablesawMiterJig-2https://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-tablesawmiterjig-1.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-TablesawMiterJig-1Counter weight for miter jibhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-sightedge.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-SightEdgeClose up of bit usedhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-sightedge-4.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-SightEdge-4Panel rabbet using L-Shaped fencehttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-sightedge-2.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-SightEdge-2Work in progresshttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-sightedge-3.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-SightEdge-3Sight edge rabbethttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-shaperwork.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-ShaperWorkShaper for Edginghttps://woodworksbyjohn.com/wp-content/uploads/2015/11/custompictureframes-woodworksbyjohn-lasvegas-panelglueup.jpgCustomPictureFrames-WoodworksbyJohn-LasVegas-PanelGlueUpInner panel glued up2015-11-19T16:52:05+00:00monthlyhttps://woodworksbyjohn.com/2015/11/06/bench-for-carving-gilding/https://woodworksbyjohn.com/wp-content/uploads/2015/11/screen-shot-2015-11-05-at-2-39-30-pm.pngScreen Shot 2015-11-05 at 2.39.30 PMHarbor Freight (China) Builthttps://woodworksbyjohn.com/wp-content/uploads/2015/11/bench-complete.jpgBench completeJohn Builthttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-tenon-1.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-Tenon-1Tenonshttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-lapjoint-3.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-LapJoint-33.) Trial fit, move fence over as neededhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-lapjoint-drilled.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-LapJoint-Drilled1.) Centers located, counterbored and drilledhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-lapjoint-2.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-LapJoint-22.) Successive passes, rip fence determines endhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-lapjoint-1.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-LapJoint-11.) Location determined by stop on fencehttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-finalpreparation.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-FinalPreparationPreparing for Finishhttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-identification.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-Identification2.) Marked with machinists stampshttps://woodworksbyjohn.com/wp-content/uploads/2015/11/poplarworkbench-woodworksbyjohn-lasvegas-furnituremaker-assembly-15.jpgPoplarWorkBench-WoodworksbyJohn-LasVegas-FurnitureMaker-Assembly-155.) Top bolted and ready for work!2015-11-06T21:24:36+00:00monthlyhttps://woodworksbyjohn.com/2015/10/27/small-picture-frames-complete/https://woodworksbyjohn.com/wp-content/uploads/2015/10/woodworksbyjohn-firstcottonwoodcarving-left.jpgWoodworksbyJohn-FirstCottonwoodCarving-LeftLeft sidehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/woodworksbyjohn-firstcottonwoodcarving-right.jpgWoodworksbyJohn-FirstCottonwoodCarving-RightRight sidehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/woodworksbyjohn-firstcottonwoodcarving-front.jpgWoodworksbyJohn-FirstCottonwoodCarving-FrontFront viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-sanding-stacking.jpgSmallPictureFrames-WoodworksbyJohn-Sanding-StackingProduction Modehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-primed.jpgSmallPictureFrames-WoodworksbyJohn-PrimedRed Primed Frameshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-hanger-3.jpgSmallPictureFrames-WoodworksbyJohn-Hanger-33.) Nailset and hammer to drive homehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-hanger-1.jpgSmallPictureFrames-WoodworksbyJohn-Hanger-11.) Locate centerhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-hanger-2.jpgSmallPictureFrames-WoodworksbyJohn-Hanger-22.) Pre-drill hole with scratch awlhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-complete.jpgSmallPictureFrames-WoodworksbyJohn-Completehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/smallpictureframes-woodworksbyjohn-antiquing.jpgSmallPictureFrames-WoodworksbyJohn-AntiquingRubbing back to expose primer2015-10-28T03:29:27+00:00monthlyhttps://woodworksbyjohn.com/2015/10/25/small-custom-picture-frames/https://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-roundover.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-RoundoverFirst edges are rounded overhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-ripping.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-RippingRipping to 7/8" widthhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-results.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-ResultsTwelve frames, 8" x 8" eachhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-rabbet2.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-rabbet2Pass two, rabbet completehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-rabbbet1.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-rabbbet1First pass for rabbethttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-profile.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-profileProfile for 8" x 8" Frameshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-corebox.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-CoreBoxThen, core box bit in centerhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/simplepictureframes-stockpreparation-woodworksbyjohn-edgeprep.jpgSimplePictureFrames-StockPreparation-WoodworksbyJohn-EdgePrepPlaning working edge2015-12-06T12:15:42+00:00monthlyhttps://woodworksbyjohn.com/2015/10/22/chair-is-complete-education-ongoing/https://woodworksbyjohn.com/wp-content/uploads/2015/10/screen-shot-2015-10-22-at-8-00-38-pm.pngScreen Shot 2015-10-22 at 8.00.38 PMExample of Joineryhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/completedteakchair-woodworksbyjohn-lasvegas.jpgCompletedTeakChair-WoodworksbyJohn-LasVegasTeak Chair Repairedhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/chairrepair-woodworksbyjohn-stringtechnique-dowelconstruction.jpgChairRepair-WoodworksbyJohn-StringTechnique-DowelConstructionCotton string on Dowelshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/chairrepair-woodworksbyjohn-chaircomparison-1.jpgChairRepair-WoodworksbyJohn-ChairComparison-1Teak Chair vs. My Dining Chairhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/chairrepair-woodworksbyjohn-chaircomparison-2.jpgChairRepair-WoodworksbyJohn-ChairComparison-2Upholstery in placehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/chairrepair-woodworksbyjohn-chairclampup.jpgChairRepair-WoodworksbyJohn-ChairClampUpAssembled!https://woodworksbyjohn.com/wp-content/uploads/2015/10/chairrepair-woodworksbyjohn-chairclampup-question.jpgChairRepair-WoodworksbyJohn-ChairClampUp-QuestionWhat's first?2015-10-23T13:43:27+00:00monthlyhttps://woodworksbyjohn.com/2015/10/20/chair-repair-and-the-things-im-learning/https://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-unseencrack-1.jpgTeakChairRepair-WoodworksbyJohn-UnseenCrack-1Area of Damagehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-unseencrack-2.jpgTeakChairRepair-WoodworksbyJohn-UnseenCrack-2Close up of crack across finger jointshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-stretcherwork-3.jpgTeakChairRepair-WoodworksbyJohn-stretcherwork-3Set up block to guide drillhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-stretcherwork-1.jpgTeakChairRepair-WoodworksbyJohn-stretcherwork-1Dowels cut flush, then cleanedhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-stretcherwork-2.jpgTeakChairRepair-WoodworksbyJohn-stretcherwork-2Locating center with templatehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-seatstretcher.jpgTeakChairRepair-WoodworksbyJohn-SeatStretcherSeat support, broken dowels and unfinished surface.https://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-leg-dowel-removal.jpgTeakChairRepair-WoodworksbyJohn-leg-dowel removalDowel removed, screw and hammer methodhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-beginnings.jpgTeakChairRepair-WoodworksbyJohn-BeginningsSeat Assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-final-cleanup.jpgTeakChairRepair-WoodworksbyJohn-final cleanupRemoving glue from dowel holeshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/teakchairrepair-woodworksbyjohn-apart.jpgTeakChairRepair-WoodworksbyJohn-ApartSide & Arm Separated 2015-10-21T14:16:08+00:00monthlyhttps://woodworksbyjohn.com/2015/10/18/american-impressionist-show-2015/https://woodworksbyjohn.com/wp-content/uploads/2015/10/dianes-honorable-mention.jpgDiane's Honorable MentionAmerican Impressionist Show 2015 Honorable Mention2015-10-19T10:38:02+00:00monthlyhttps://woodworksbyjohn.com/2015/10/13/summerlin-festival-of-arts-2015/https://woodworksbyjohn.com/wp-content/uploads/2015/10/winecabinet-woodworksbyjohn-lasvegas-customfurniture.jpgWineCabinet-WoodworksbyJohn-LasVegas-CustomFurnitureWall Hung Wine Cabinethttps://woodworksbyjohn.com/wp-content/uploads/2015/10/dianesetting-up.jpgDianeSetting upDiane setting uphttps://woodworksbyjohn.com/wp-content/uploads/2015/10/summerlinfestival-of-the-arts-setup-2.jpgSummerlinFestival of the Arts-Setup-2https://woodworksbyjohn.com/wp-content/uploads/2015/10/summerlinfestival-of-the-arts-sundayam.jpgSummerlinFestival of the Arts-SundayAMDay 2: Sunday Oct. 11https://woodworksbyjohn.com/wp-content/uploads/2015/10/summerlinfestival-of-the-arts-setup-1.jpgSummerlinFestival of the Arts-Setup-1https://woodworksbyjohn.com/wp-content/uploads/2015/10/summerlinfair-2015.jpgSummerlinFair 2015Things starting to come together2015-10-13T20:39:20+00:00monthlyhttps://woodworksbyjohn.com/2015/10/01/wenge-spalted-maple-dovetails-and-pegs/https://woodworksbyjohn.com/wp-content/uploads/2015/10/summerlin-e-blast.jpgSummerlin e-Blasthttps://woodworksbyjohn.com/wp-content/uploads/2015/10/planingspaltedmaple.jpgPlaningSpaltedMaplePlaning Spalted Maplehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wengespalted-maple.jpgWenge:Spalted Maplehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn-wengepegs-lid.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohn-WengePegs-LidFinal Toucheshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn-wengepegs-5.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohn-WengePegs-55.) Gently tap it through the dowel platehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn-wengepegs-4.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohn-WengePegs-44.) Sharpen one end to ease startinghttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn-wengepegs-2.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohn-WengePegs-22.) This serves as a guidehttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn-wengepegs-3.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohn-WengePegs-33.) Use dowel sled to reduce square edgeshttps://woodworksbyjohn.com/wp-content/uploads/2015/10/wenge-spaltedmaple-boxseries-woodworksbyjohn-wengepegs-1.jpgWenge-SpaltedMaple-BoxSeries-WoodworksbyJohn-WengePegs-11.) Initially pound in 3/16" hole2015-10-06T10:36:37+00:00monthlyhttps://woodworksbyjohn.com/2015/09/24/miter-cutting-sled-for-sawstop-tablesaw/https://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-threadedinsert-3.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-ThreadedInsert-33.) Use pliers to unlock wing nuthttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-threadedinsert-2.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-ThreadedInsert-22.) Driven into hole, straight as possiblehttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-threadedinsert-1.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-ThreadedInsert-11.)Insert, bolt, wing nut, & wrenchhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-stopblock-2.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-StopBlock-2After setting one screw, fine tuned to bladehttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-screwstolength-2.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-ScrewstoLength-2Wire stripper leaves nice cut and threadshttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-stopblock-1.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-StopBlock-1Initial set up, jammed a piece of masonite in kerfhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-screwstolength-1.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-ScrewstoLength-1Square set for amount to be cut offhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-inuse-3.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-InUse-33.) Detail of stop, reading plus 5/8" = inside length https://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-inuse-2.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-InUse-22.) Slid against stop to cut to lengthhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-mitercuttingjig-woodworksbyjohn-lasvegas-inuse-1.jpgSawStop-MiterCuttingJig-WoodworksbyJohn-LasVegas-InUse-11.) One angle cut2016-07-27T03:13:44+00:00monthlyhttps://woodworksbyjohn.com/2015/09/15/easel-palette-box-complete/https://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-panel.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-PanelPanel https://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-handleout.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-HandleoutHandle in "Grip" Positionhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-open.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-OpenPalette Box Wings Openhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-handlein.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-HandleinHandle in Flat Positionhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-finalproblem.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-FinalProblemWing Levelerhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-canvas.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-CanvasStretched Canvas https://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-closed.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-ClosedInstalled, Palette Box Closedhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-2.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-2Camera Mounting Plate https://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalettebox-woodworksbyjohn-artistsfurnishings-1.jpgEaselandPaletteBox-WoodworksbyJohn-ArtistsFurnishings-1Easel, Palette Box, & Tripodhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/easelandpalattebox-woodworksbyjohn-lasvegas-1.jpgEaselandPalatteBox-WoodworksbyJohn-LasVegas-1Easel and Palette Box2015-09-20T01:19:45+00:00monthlyhttps://woodworksbyjohn.com/2015/09/13/portable-easel-and-woodworking-challenges/https://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-knob-3.jpgPortableEasel-WoodworksbyJohn-Knob-33.) Cut off from one side traced to other for symmetry https://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-knob-5.jpgPortableEasel-WoodworksbyJohn-Knob-54.) Filed and sanded to shapehttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-knob-2.jpgPortableEasel-WoodworksbyJohn-Knob-22.) Screw head cut off, design sketched onhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-knob-1.jpgPortableEasel-WoodworksbyJohn-Knob-11.) Threaded rod epoxied into wood and secured with screwhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-handle-onedone.jpgPortableEasel-WoodworksbyJohn-Handle-OneDone1.) One done, 9/13mm gouge cut endshttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-hardware-complete.jpgPortableEasel-WoodworksbyJohn-Hardware-CompleteHandle and Knob Completehttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-handle-6.jpgPortableEasel-WoodworksbyJohn-Handle-66.) 3/16" bit in drill press to size uniformlyhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-handle-3.jpgPortableEasel-WoodworksbyJohn-Handle-34.) 11/2mm gouge to cut cornershttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-handle-5.jpgPortableEasel-WoodworksbyJohn-Handle-55.) Remove interior with knifehttps://woodworksbyjohn.com/wp-content/uploads/2015/09/portableeasel-woodworksbyjohn-handle-2.jpgPortableEasel-WoodworksbyJohn-Handle-23.) Pencil in slot perimeter2015-09-14T11:24:04+00:00monthlyhttps://woodworksbyjohn.com/2015/09/06/how-to-make-a-finger-joint-jig-for-sawstops-sliding-table/https://woodworksbyjohn.com/wp-content/uploads/2015/09/parts.jpgPartsParts Neededhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-10.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-10End Resulthttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-8.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-8https://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-9.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-9Movement gauging hinthttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-7.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-7Align dado to jighttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-6.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-6Fitting the Keyhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-4.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-4Carrier shifted 2X dado widthhttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-5.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-5https://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-3.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-3Backer Piecehttps://woodworksbyjohn.com/wp-content/uploads/2015/09/sawstop-slidingtable-fingerjointjig-howto-woodworksbyjohn-2.jpgSawStop-SlidingTable-Fingerjointjig-howto-WoodworksbyJohn-2Mounting Holes2015-09-07T00:42:47+00:00monthlyhttps://woodworksbyjohn.com/2015/08/31/finger-jointed-box-series/https://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-slotcutterbit-2.jpgDovetailBoxSeries-WoodworksbyJohn-SlotCutterBit-2After cutting, I go for two passeshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-slotcutterbit-1.jpgDovetailBoxSeries-WoodworksbyJohn-SlotCutterBit-1Mount bit in router tablehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-lidrabbet-2.jpgDovetailBoxSeries-WoodworksbyJohn-LidRabbet-21.) Initial rabbet cut on edgehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-lidrabbet-1.jpgDovetailBoxSeries-WoodworksbyJohn-LidRabbet-12.) Second rabbet cut on facehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-lidchamfer-3.jpgDovetailBoxSeries-WoodworksbyJohn-LidChamfer-35.) Low angle plane to remove saw marks https://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-lidchamfer-1.jpgDovetailBoxSeries-WoodworksbyJohn-LidChamfer-13.) 15 degree sled to raise ends firsthttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-lidchamfer-2.jpgDovetailBoxSeries-WoodworksbyJohn-LidChamfer-24.) Followed by cutting edgeshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailboxseries-woodworksbyjohn-lid-prefinished.jpgDovetailBoxSeries-WoodworksbyJohn-Lid-PrefinishedLids 0iled, 2 in front are distressed.https://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstopslidingtable-cuttingstock-woodworksbyjohn.jpgSawStopSlidingTable-CuttingStock-WoodworksbyJohnSliding Table with Stops2015-09-01T23:16:40+00:00monthlyhttps://woodworksbyjohn.com/2015/08/28/sawstop-slidingtable-finger-joint-jig/https://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstopfingerjoint.jpgSawStopFingerJointFirst Practice Jointhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstop-slidingtableaccessory-fingerjointjig-woodworksbyjohn-6.jpgSawStop-SlidingTableAccessory-FingerJointJig-WoodworksbyJohn-6https://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstop-slidingtableaccessory-fingerjointjig-woodworksbyjohn-5.jpgSawStop-SlidingTableAccessory-FingerJointJig-WoodworksbyJohn-5Safety Blockhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstop-slidingtableaccessory-fingerjointjig-woodworksbyjohn-3.jpgSawStop-SlidingTableAccessory-FingerJointJig-WoodworksbyJohn-3https://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstop-slidingtableaccessory-fingerjointjig-woodworksbyjohn-4.jpgSawStop-SlidingTableAccessory-FingerJointJig-WoodworksbyJohn-4Fine Tuning Locationhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstop-slidingtableaccessory-fingerjointjig-woodworksbyjohn-2.jpgSawStop-SlidingTableAccessory-FingerJointJig-WoodworksbyJohn-2Jig attached to sliding armhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/sawstop-slidingtableaccessory-fingerjointjig-woodworksbyjohn-1.jpgSawStop-SlidingTableAccessory-FingerJointJig-WoodworksbyJohn-1Jig and First Joint2015-08-28T21:05:50+00:00monthlyhttps://woodworksbyjohn.com/2015/08/27/custom-pine-box-complete-delivered/https://woodworksbyjohn.com/wp-content/uploads/2015/08/threedovetailedboxes-woodworksbyjohn.jpgThreeDovetailedBoxes-WoodworksbyJohnThree Dovetailed Boxeshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailedbox-bottomlining-2.jpgDovetailedBox-BottomLining-2https://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailedbox-bottomlining-1.jpgDovetailedBox-BottomLining-12015-08-27T23:11:48+00:00monthlyhttps://woodworksbyjohn.com/2015/08/22/custom-order-dovetailed-pine-box/https://woodworksbyjohn.com/wp-content/uploads/2015/08/miteredbox-tutorial-woodworksbyjohn-4.jpgMiteredBox-Tutorial-WoodworksbyJohn-44.) Assembled using packaging tapehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/miteredbox-tutorial-woodworksbyjohn-3.jpgMiteredBox-Tutorial-WoodworksbyJohn-33.) Spacer for difference between long and short sideshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/miteredbox-tutorial-woodworksbyjohn-1.jpgMiteredBox-Tutorial-WoodworksbyJohn-11.) After mitering one end, stop set for longest dimensionhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/miteredbox-tutorial-woodworksbyjohn-2.jpgMiteredBox-Tutorial-WoodworksbyJohn-22.) Long side cut, flipped to orient miter correctlyhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailtutorial-woodworksbyjohn-tails-4.jpgDovetailTutorial-WoodworksbyJohn-Tails-44.) After cutting about half way, turn board over to finish tailshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailtutorial-woodworksbyjohn-tails-3.jpgDovetailTutorial-WoodworksbyJohn-Tails-33.) Stack both boards and begin on outside face https://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailtutorial-woodworksbyjohn-tails-1.jpgDovetailTutorial-WoodworksbyJohn-Tails-11.) Before cutting shoulders, chisel in a notchhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailtutorial-woodworksbyjohn-tails-2.jpgDovetailTutorial-WoodworksbyJohn-Tails-22.) Cut to line for shoulder cutshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailtutorial-woodworksbyjohn-pins-transfer-4.jpgDovetailTutorial-WoodworksbyJohn-Pins-Transfer-44.) Transfer and darken lines for cuttinghttps://woodworksbyjohn.com/wp-content/uploads/2015/08/dovetailtutorial-woodworksbyjohn-pins-transfer-3.jpgDovetailTutorial-WoodworksbyJohn-Pins-Transfer-33.) Immediately mark area to be removed2015-11-24T07:35:00+00:00monthlyhttps://woodworksbyjohn.com/2015/08/21/johns-armoire-it-is-finished/https://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-threequarter-woodworksbyjohn-customfurniture-lasvegas.jpgJohn's Armoire-threequarter-WoodworksbyJohn-CustomFurniture-LasVegasJohn's Armoire; 3/4 Viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-upthestairs-3.jpgJohn's Armoire-UptheStairs-3…. we made the landing!https://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-upthestairs-2.jpgJohn's Armoire-UptheStairs-2….. halfway up the stairs and ….https://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-open-woodworksbyjohn-customfurniture-lasvegas.jpgJohn's Armoire-Open-WoodworksbyJohn-CustomFurniture-LasVegasShaker Inspired Armoirehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-upthestairs-1.jpgJohn's Armoire-UptheStairs-1First steps then …...https://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-inplace-2.jpgJohn's Armoire-InPlace-2The view from the bed.https://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-inplace-1.jpgJohn's Armoire-InPlace-1In it's place, what you see as you enter.https://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-face-woodworksbyjohn-customfurniture-lasvegas.jpgJohn's Armoire-Face-WoodworksbyJohn-CustomFurniture-LasVegasJohn's Armoire; Front View2015-08-23T04:23:31+00:00monthlyhttps://woodworksbyjohn.com/2015/08/19/vacation-fun-back-to-the-shop/https://woodworksbyjohn.com/wp-content/uploads/2015/08/pinedovetailbox-tailsfirst-woodworksbyjohn.jpgPineDovetailBox-TailsFirst-WoodworksbyJohnTails cut, both ends cut at same timehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/pinedovetailbox-layout-woodworksbyjohn.jpgPineDovetailBox-LayOut-WoodworksbyJohnTail lay-out copied from originalhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/pinedovetailbox-stanley140-woodworksbyjohn.jpgPineDovetailBox-Stanley140-WoodworksbyJohnStanley 140 Trickhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-back-unfinished-woodworksbyjohn.jpgJohn's Armoire-Back-Unfinished-WoodworksbyJohnBefore back was appliedhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-back-finished-woodworksbyjohn.jpgJohn's Armoire-Back-finished-WoodworksbyJohnAfter back installed, some variations in the plywoodhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/johns-armoire-back-estucianpins-woodworksbyjohn.jpgJohn's Armoire-Back-EstucianPins-WoodworksbyJohnLocating and pre-drilling for pinshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/beginning-of-hiawatha.jpgBeginning of Hiawatha2015-08-19T14:56:20+00:00monthlyhttps://woodworksbyjohn.com/2015/08/09/the-end-is-closer/https://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-drawerbottom-3.jpgArmoire-WoodworksbyJohn-DrawerBottom-3Tightened just to allow movementhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-drawerbottom-2.jpgArmoire-WoodworksbyJohn-DrawerBottom-2Fitting with Stanley Rabbet Planehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-drawerbottom-1.jpgArmoire-WoodworksbyJohn-DrawerBottom-1Gimlet to start screwhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-picadry.jpgArmoire-WoodworksbyJohn-PicaDryPicaDry Pencilhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-endofday-2.jpgArmoire-WoodworksbyJohn-EndofDay-2Door open showing shelveshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-picadry-1.jpgArmoire-WoodworksbyJohn-PicaDry-1Marking center of holehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-endofday-1.jpgArmoire-WoodworksbyJohn-EndofDay-1Tired but happy!https://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-customfurniture-waxout.jpgArmoire-WoodworksbyJohn-CustomFurniture-WaxOut….. wax outhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-customfurniture-waxin.jpgArmoire-WoodworksbyJohn-CustomFurniture-WaxInWax in ……..https://woodworksbyjohn.com/wp-content/uploads/2015/08/armoire-woodworksbyjohn-customfurniture-shelves-2.jpgArmoire-WoodworksbyJohn-CustomFurniture-Shelves-22015-08-15T10:13:54+00:00monthlyhttps://woodworksbyjohn.com/2015/08/07/is-the-end-in-sight/https://woodworksbyjohn.com/wp-content/uploads/2015/08/woodworksbyjohn-lasvegas-furnituremaker.jpgWoodworksbyJohn-LasVegas-FurnitureMakerDay's Endhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/cornerblocks-woodworksbyjohn-lasvegas-furnituremaker-2.jpgCornerBlocks-WoodworksbyJohn-LasVegas-FurnitureMaker-2Completed bracketshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/cornerblocks-woodworksbyjohn-lasvegas-furnituremaker-1.jpgCornerBlocks-WoodworksbyJohn-LasVegas-FurnitureMaker-1Part of the processhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/hangingdoor-woodworksbyjohn-lasvegas-furnituremaker-6.jpgHangingDoor-WoodworksbyJohn-LasVegas-FurnitureMaker-6Adjusting strike edge of doorhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/hangingdoor-woodworksbyjohn-lasvegas-furnituremaker-5.jpgHangingDoor-WoodworksbyJohn-LasVegas-FurnitureMaker-5Installation complete, checking reveal on strike edgehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/hangingdoor-woodworksbyjohn-lasvegas-furnituremaker-4.jpgHangingDoor-WoodworksbyJohn-LasVegas-FurnitureMaker-4Armoire on side for door installationhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/hangingdoor-woodworksbyjohn-lasvegas-furnituremaker-3.jpgHangingDoor-WoodworksbyJohn-LasVegas-FurnitureMaker-3Door hinge installationhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/hangingdoor-woodworksbyjohn-lasvegas-furnituremaker-2.jpgHangingDoor-WoodworksbyJohn-LasVegas-FurnitureMaker-2Practice hinge installationhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/hangingdoor-woodworksbyjohn-lasvegas-furnituremaker-1.jpgHangingDoor-WoodworksbyJohn-LasVegas-FurnitureMaker-1Jig and tools used for Hingeshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/formingtop-woodworksbyjohn-lasvegas-furnituremaker.jpgFormingTop-WoodworksbyJohn-LasVegas-FurnitureMakerPlaning and checking top bevel2015-08-07T23:38:55+00:00monthlyhttps://woodworksbyjohn.com/2015/08/02/drawers-one-more-time-and-a-door-too/https://woodworksbyjohn.com/wp-content/uploads/2015/08/drawers-cleanup-dovetail-woodworksbyjohn-lasvegas-3.jpgDrawers-CleanUp-Dovetail-WoodworksbyJohn-LasVegas-3Set up to plane drawershttps://woodworksbyjohn.com/wp-content/uploads/2015/08/drawers-runners-woodworksbyjohn-lasvegas-2.jpgDrawers-Runners-WoodworksbyJohn-LasVegas-2Planing the side of the drawer runnerhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/johnsarmoire-clampvsdowel-doorassembly.jpgJohnsArmoire-ClampvsDowel-DoorAssemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/drawers-runners-woodworksbyjohn-lasvegas-1.jpgDrawers-Runners-WoodworksbyJohn-LasVegas-1Planing the bottom of the drawer runnerhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/drawers-cleanup-dovetail-woodworksbyjohn-lasvegas-2.jpgDrawers-CleanUp-Dovetail-WoodworksbyJohn-LasVegas-2How it looks once it's dry, ready for a block planehttps://woodworksbyjohn.com/wp-content/uploads/2015/08/drawerbottom-expansionslot-woodworksbyjohn-sawstopslidingtable.jpgDrawerBottom-ExpansionSlot-WoodworksbyJohn-SawStopSlidingTableDrawer bottom expansion slothttps://woodworksbyjohn.com/wp-content/uploads/2015/08/drawers-cleanup-dovetail-woodworksbyjohn-lasvegas-1.jpgDrawers-CleanUp-Dovetail-WoodworksbyJohn-LasVegas-1Glue removed with wet, paper towelhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/beforechurch.jpgBeforeChurchhttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoiredoor-woodworksbyjohn-lasvegas-tenons-1.jpgArmoireDoor-WoodworksbyJohn-LasVegas-Tenons-1Razor saw to size tenonshttps://woodworksbyjohn.com/wp-content/uploads/2015/08/armoiredoor-woodworksbyjohn-lasvegas-sawstopslidingtable-tenons.jpgArmoireDoor-WoodworksbyJohn-LasVegas-SawStopSlidingTable-TenonsCutting tenon with sliding table & dado head2015-08-03T14:09:10+00:00monthlyhttps://woodworksbyjohn.com/2015/07/28/drawers-yet-again-sliding-dovetail-dilemma/https://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-drawers-woodworksbyjohn-4.jpgSlidingDovetail-Drawers-WoodworksbyJohn-44.) Once done, marked for assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-drawers-woodworksbyjohn-assembled.jpgSlidingDovetail-Drawers-WoodworksbyJohn-AssembledOne of Ninehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-drawers-woodworksbyjohn-3.jpgSlidingDovetail-Drawers-WoodworksbyJohn-33.) Chisel to trim/taper pinhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-drawers-woodworksbyjohn-2.jpgSlidingDovetail-Drawers-WoodworksbyJohn-22.) Using knife to cut shoulderhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-drawers-woodworksbyjohn-1.jpgSlidingDovetail-Drawers-WoodworksbyJohn-11.) Checking problem & marking binding areashttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetailassembly-drawers-woodworksbyjohn-caul-2.jpgDovetailAssembly-Drawers-WoodworksbyJohn-Caul-2Cauls and clamps in placehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetailassembly-drawers-woodworksbyjohn-caul.jpgDovetailAssembly-Drawers-WoodworksbyJohn-CaulTails located on MDF 2015-07-29T04:12:53+00:00monthlyhttps://woodworksbyjohn.com/2015/07/28/bloglovin-experiment/2015-07-28T13:56:56+00:00monthlyhttps://woodworksbyjohn.com/2015/07/26/drawers-continued-side-hung-in-the-doghouse/https://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-slide-3.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Slide-3https://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-slide-2.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Slide-2Speed tenon technique https://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-slide-1.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Slide-1Initial cuts with razor sawhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-ready-to-assemble.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Ready to AssembleReady for assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-process-3.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Process-3Planing to fine tune runner thicknesshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-process-4.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Process-4One down, two to gohttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-process-2.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Process-2Checking fit of the left-hand runnerhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-process-1.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Process-1Positioning first drawer runnerhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-drawer2-3.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Drawer2-32.) Runner sized for left sidehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/woodworksbyjohn-customfurniture-sidehungdrawers-drawer2-done.jpgWoodworksbyJohn-CustomFurniture-SideHungDrawers-Drawer2-done2.) Two down -- one to go!2015-07-26T15:13:08+00:00monthlyhttps://woodworksbyjohn.com/2015/07/23/drawers-continued-bottoms-and-sliding-dovetails/https://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-woodworksbyjohn-routertable-trialfit.jpgSlidingDovetail-WoodworksbyJohn-RouterTable-TrialFit3.) Check dry fit for drawerhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-woodworksbyjohn-routertable-proof.jpgSlidingDovetail-WoodworksbyJohn-RouterTable-Proof2.) Looks good!https://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-woodworksbyjohn-routertable-female.jpgSlidingDovetail-WoodworksbyJohn-RouterTable-Femalehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/slidingdovetail-woodworksbyjohn-routertable-male.jpgSlidingDovetail-WoodworksbyJohn-RouterTable-Male!.) Scrap piece to "dial in" setinghttps://woodworksbyjohn.com/wp-content/uploads/2015/07/garagedoorinsulation3.jpgGarageDoorInsulation3https://woodworksbyjohn.com/wp-content/uploads/2015/07/drawerbottoms-woodworksbyjohn-sizing.jpgDrawerBottoms-WoodworksbyJohn-sizing3.) Tape indicates minimum size neededhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/drawerbottoms-woodworksbyjohn-resaw.jpgDrawerBottoms-WoodworksbyJohn-Resaw2.) Resawing on the bandsawhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/drawerbottoms-woodworksbyjohn-selectingpieces.jpgDrawerBottoms-WoodworksbyJohn-SelectingPieces4.) Marking boardshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/drawerbottoms-woodworksbyjohn-planing.jpgDrawerBottoms-WoodworksbyJohn-Planing1.) Planing a working edgehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/drawerbottoms-woodworksbyjohn-gluedup.jpgDrawerBottoms-WoodworksbyJohn-GluedUp5.) First one glued up2015-07-24T03:55:39+00:00monthlyhttps://woodworksbyjohn.com/2015/07/18/dovetailing-drawers-a-sensible-approach-pin-boards/https://woodworksbyjohn.com/wp-content/uploads/2015/07/pinboard-severingfiberswoodworksbyjohn-dovetails-3.jpgPinBoard-SeveringFibers=WoodworksbyJohn-Dovetails-34.) Paring web with spacerhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/pinboard-severingfiberswoodworksbyjohn-dovetails-2.jpgPinBoard-SeveringFibers=WoodworksbyJohn-Dovetails-23.) Refining shoulderhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/endofday-woodworksbyjohn-2.jpgEndofDay-WoodworksbyJohn-2Side viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/halfblinddovetail-fixture-woodworksbyjohn.jpgHalfBlindDovetail-Fixture-WoodworksbyJohn-5.) Transfer jig detailedhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/endofday-woodworksbyjohn-1.jpgEndofDay-WoodworksbyJohn-1Head on viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/calipertrick-woodworksbyjohn-3.jpgCaliperTrick-WoodworksbyJohn-33.) Checking scribed linehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/calipertrick-woodworksbyjohn-2.jpgCaliperTrick-WoodworksbyJohn-22.) Used to measure rabbethttps://woodworksbyjohn.com/wp-content/uploads/2015/07/calipertrick-woodworksbyjohn-1.jpgCaliperTrick-WoodworksbyJohn-11.) Step on back of caliperhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/pinlayout.jpgpinlayout1.) Transferring tails to pin board2015-07-21T02:54:06+00:00monthlyhttps://woodworksbyjohn.com/2015/07/17/dovetailing-drawers-a-sensible-approach-tails-first/https://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-done.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-DoneReady for Pin Boardshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-5.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-56.) Stack boards to begin chisel work on show facehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-6.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-67.) After beginning, flip boards over and complete chisel workhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-4.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-45.) Mark waste and cut tailshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-3.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-34.) Measure out 1/8" from center for tailhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-1.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-12.) Marking first tail, 1/4" from endhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-tails-2.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Tails-23.) Divide by 3, step off with dividershttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-stanley140trick.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Stanley140trick1.) Stanley 140 trick on tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-pins-4.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Pins-45.) Refining webhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/dovetaileddrawers-johnsarmoire-woodworksbyjohn-pins-3.jpgDovetailedDrawers-JohnsArmoire-WoodworksbyJohn-Pins-34.) Refining shoulder2015-07-17T14:57:16+00:00monthlyhttps://woodworksbyjohn.com/2015/07/09/colonial-williamsburg-woodworking/https://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-tormek-woodworksbyjohn.jpgColonialWilliamsburg-Tormek-WoodworksbyJohn-Colonial "Tormek"?https://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-jointerplane-woodworksbyjohn.jpgColonialWilliamsburg-JointerPlane-WoodworksbyJohnJointerPlane - Leg for Lathehttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-moldingplanes-woodworksbyjohn.jpgColonialWilliamsburg-MoldingPlanes-WoodworksbyJohnSet of Molding Planeshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-interior-woodworksbyjohn-6.jpgColonialWilliamsburg-Interior-WoodworksbyJohn-6Drawing of a chair they are buildinghttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-interior-woodworksbyjohn-5.jpgColonialWilliamsburg-Interior-WoodworksbyJohn-5View of Chairs and another Woodworkerhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-interior-woodworksbyjohn-3.jpgColonialWilliamsburg-Interior-WoodworksbyJohn-3Workbench Locationhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-interior-woodworksbyjohn-4.jpgColonialWilliamsburg-Interior-WoodworksbyJohn-4Chisels and Hand Sawshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-interior-woodworksbyjohn-2.jpgColonialWilliamsburg-Interior-WoodworksbyJohn-2Window over Workbenchhttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-drawer-woodworksbyjohn.jpgColonialWilliamsburg-Drawer-WoodworksbyJohnDrawer with Fine Dovetailshttps://woodworksbyjohn.com/wp-content/uploads/2015/07/colonialwilliamsburg-cooper-woodworksbyjohn-2.jpgColonialWilliamsburg-Cooper-WoodworksbyJohn-2Cooper's Products2015-07-10T02:49:57+00:00monthlyhttps://woodworksbyjohn.com/2015/06/26/whats-it-all-about-and-a-stopped-dado/https://woodworksbyjohn.com/wp-content/uploads/2015/06/stoppeddado-inplace.jpgStoppedDado-InPlaceThe Doghousehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/stoppeddado-4.jpgStoppedDado-44.) Flattening and bringing to depth with Stanley #271https://woodworksbyjohn.com/wp-content/uploads/2015/06/stoppeddado-5.jpgStoppedDado-55.) Completed stopped dadohttps://woodworksbyjohn.com/wp-content/uploads/2015/06/stoppeddado-3.jpgStoppedDado-33.) Chiseling to approximate depth of 3/32"https://woodworksbyjohn.com/wp-content/uploads/2015/06/stoppeddado-2.jpgStoppedDado-22.) Removing from center to create a "hill"https://woodworksbyjohn.com/wp-content/uploads/2015/06/drawerparts-woodworksbyjohn-2.jpgDrawerParts-WoodworksbyJohn-2Radius on bottom of all pieceshttps://woodworksbyjohn.com/wp-content/uploads/2015/06/stoppeddado-1.jpgStoppedDado-11.)Scribing deep lines with knifehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/drawerparts-woodworksbyjohn-1.jpgDrawerParts-WoodworksbyJohn-1Truing up straight line rip 2015-06-30T03:20:05+00:00monthlyhttps://woodworksbyjohn.com/2015/06/23/major-hurdle-passed-today/https://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-wheeled.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-wheeledFramework Completehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-finished.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-Finished12.) Mission completed -- thanks guys!https://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-drawerweb.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-drawerwebDrawer Web Closeuphttps://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-13.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-1310.) More clamps, 15 or so totalhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-12.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-129.) Clamps to bring things homehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-11.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-118.) Really, where are those mortises!!https://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-8.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-87.) Raising from the floorhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-10.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-107.) Not this again --https://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-7.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-76.) Where's the mortis part 2?https://woodworksbyjohn.com/wp-content/uploads/2015/06/johnsarmoire-assembly-woodworksbyjohn-customfurniture-lasvegas-5.jpgJohnsArmoire-Assembly-WoodworksbyJohn-CustomFurniture-LasVegas-55.) Where's the mortise??2015-06-25T13:50:06+00:00monthlyhttps://woodworksbyjohn.com/2015/06/11/sawstop-sliding-table-or-old-dog-new-tricks/https://woodworksbyjohn.com/wp-content/uploads/2015/06/mitergauge.jpgMiterGaugeDetail of miter gaugehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-thirdhand.jpgSawStopSlidingTable-WoodworksbyJohn-ThirdHandThird Handhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-oldschoolsketchup-2.jpgSawStopSlidingTable-WoodworksbyJohn-OldSchoolSketchUp-2Final Layouthttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-oldschoolsketchup-1.jpgSawStopSlidingTable-WoodworksbyJohn-OldSchoolSketchUp-1Old School Sketch Uphttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-finallayout-3.jpgSawStopSlidingTable-WoodworksbyJohn-FinalLayOut-3Looking Westhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-impressive-packing.jpgSawStopSlidingTable-WoodworksbyJohn-Impressive PackingGreat packing jobhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-finallayout-2.jpgSawStopSlidingTable-WoodworksbyJohn-FinalLayOut-2Looking Southhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-finallayout-1.jpgSawStopSlidingTable-WoodworksbyJohn-FinalLayOut-1Assembly Table Lower Positionhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-dayone.jpgSawStopSlidingTable-WoodworksbyJohn-DayOneSlider Installed; Day Onehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/sawstopslidingtable-woodworksbyjohn-calibration-1.jpgSawStopSlidingTable-WoodworksbyJohn-Calibration-1Practice cuts with slider2015-06-12T14:09:10+00:00monthlyhttps://woodworksbyjohn.com/2015/06/05/the-good-the-bad-and-the-ugly/https://woodworksbyjohn.com/wp-content/uploads/2015/06/handplane-sharpening-woodworksbyjohn-smoothplane-shavings.jpgHandPlane-Sharpening-WoodworksbyJohn-SmoothPlane-Shavings4.) Nice, thin shaving!https://woodworksbyjohn.com/wp-content/uploads/2015/06/leevalleysmallplowplane.jpgLeeValleySmallPlowPlaneLee Valley Small Plow Planehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/handplane-sharpening-woodworksbyjohn-smoothplane-settingchipbreaker.jpgHandPlane-Sharpening-WoodworksbyJohn-SmoothPlane-SettingChipBreaker1.) Setting clearance with a feeler gaugehttps://woodworksbyjohn.com/wp-content/uploads/2015/06/handplane-sharpening-woodworksbyjohn-smoothplane-almosteven.jpgHandPlane-Sharpening-WoodworksbyJohn-SmoothPlane-AlmostEven3.) …. adjust until shaving is centeredhttps://woodworksbyjohn.com/wp-content/uploads/2015/06/handplane-sharpening-woodworksbyjohn-smoothplane-heavyonleft.jpgHandPlane-Sharpening-WoodworksbyJohn-SmoothPlane-Heavyonleft2.) Cutting heavy on left so …...https://woodworksbyjohn.com/wp-content/uploads/2015/06/handplane-sharpening-woodworksbyjohn-jackplane-radiusedcorners.jpgHandPlane-Sharpening-WoodworksbyJohn-JackPlane-RadiusedCornersRadiused Block and Jack Plane Blade2015-06-06T15:28:15+00:00monthlyhttps://woodworksbyjohn.com/2015/05/31/shop-made-router-table-on-a-sawstop/https://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-routertable-shopmade-fence-2.jpgSawStop-RouterTable-Shopmade-Fence-2Auxiliary fence with Rockler clampshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-routertable-shopmade-fence-1.jpgSawStop-RouterTable-Shopmade-Fence-1Note baffle insidehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-routertable-shopmade-3.jpgSawStop-RouterTable-Shopmade-3View from tophttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-routertable-shopmade-2.jpgSawStop-RouterTable-Shopmade-2Dust Control & Making the Holehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-routertable-shopmade-1.jpgSawStop-RouterTable-Shopmade-1P/C Base Mounted under the SawStophttps://woodworksbyjohn.com/wp-content/uploads/2015/05/jetroutertable.jpgJetRouterTable2024-10-16T18:44:37+00:00monthlyhttps://woodworksbyjohn.com/2015/05/26/learning-by-doing-things-i-didnt-know-but-do-now/https://woodworksbyjohn.com/wp-content/uploads/2015/05/flatteningpanels-woodworksbyjohn-johnsarmoire-11.jpgFlatteningPanels-WoodworksbyJohn-John'sArmoire-1Flattening the Panelhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/punkymahogany-dado-woodworksbyjohn-2.jpgPunkyMahogany-Dado-WoodworksbyJohn-23.) After sides cut, wider chisel to remove bulkhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/punkymahogany-dado-woodworksbyjohn-1.jpgPunkyMahogany-Dado-WoodworksbyJohn-12.) Dado outlined on tablesaw, begin chisel workhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/punkymahogany-woodworksbyjohn-johnsarmoire-11.jpgPunkyMahogany-WoodworksbyJohn-John'sArmoire-11.) Panel flattened after scraping off glue2015-05-26T23:16:52+00:00monthlyhttps://woodworksbyjohn.com/2015/05/21/new-sawstop-now-what-do-you-do/https://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstoptablesaw-woodworksbyjohn-guard.jpgSawStopTablesaw-WoodworksbyJohn-GuardSawStop with guard in placehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcuttenon-woodworksbyjohn-johnsarmoire-6.jpgHandCutTenon-WoodworksbyJohn-JohnsArmoire-6Inside view, side not installed yethttps://woodworksbyjohn.com/wp-content/uploads/2015/05/johns-armoire-drawerframe-closeup.jpgJohn's Armoire-DrawerFrame-CloseupOutside view, drawer will sit proud of framehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcuttenon-woodworksbyjohn-johnsarmoire-5.jpgHandCutTenon-WoodworksbyJohn-JohnsArmoire-55.) Finally pare to fithttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcuttenon-woodworksbyjohn-johnsarmoire-3.jpgHandCutTenon-WoodworksbyJohn-JohnsArmoire-33.) First cut the shouldershttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcuttenon-woodworksbyjohn-johnsarmoire-4.jpgHandCutTenon-WoodworksbyJohn-JohnsArmoire-44.) Then the cheekshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcuttenon-woodworksbyjohn-johnsarmoire-2.jpgHandCutTenon-WoodworksbyJohn-JohnsArmoire-22.) Chisel to aid starting the sawhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcuttenon-woodworksbyjohn-johnsarmoire-1.jpgHandCutTenon-WoodworksbyJohn-JohnsArmoire-11.) Scribe shoulder lineshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/handcutmortise-woodworksbyjohn-johnsarmoire-6.jpgHandCutMortise-WoodworksbyJohn-JohnsArmoire-65.) One down, three to go!https://woodworksbyjohn.com/wp-content/uploads/2015/05/handcutmortise-woodworksbyjohn-johnsarmoire-4.jpgHandCutMortise-WoodworksbyJohn-JohnsArmoire-43..) 1/4" Mortise chisel in use2015-05-22T13:54:12+00:00monthlyhttps://woodworksbyjohn.com/2015/05/19/sawstop-assembly-professional-cabinet-saw-model/https://woodworksbyjohn.com/wp-content/uploads/2015/05/fineprintsawstop.jpgFinePrintSawStopRead the Fine Print!https://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-13.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-13Difference in blade washer/flange thicknesshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-14.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-14Height is identical to Jethttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-12.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-12Delta Tenon Jighttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-11.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-11https://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-9.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-9Riving knife replacing the guardhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-10.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-10Checking blade run-outhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-8.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-8Easily removed with leverhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-6.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-6Aligned, waxed, and ready for work -- almost!https://woodworksbyjohn.com/wp-content/uploads/2015/05/sawstop-professionalcabinetsaw-assemblyandreview-woodworksbyjohn-7.jpgSawStop-ProfessionalCabinetSaw-AssemblyandReview-WoodworksbyJohn-7Guard Assembly2015-05-20T14:31:25+00:00monthlyhttps://woodworksbyjohn.com/2015/05/16/tablesaw-conundrum/https://woodworksbyjohn.com/wp-content/uploads/2015/05/screen-shot-2015-05-16-at-1-18-32-pm.pngScreen Shot 2015-05-16 at 1.18.32 PMSawStop with Sliding Tablehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/whatsmissing-woodworksbyjohn-lasvegas-customfurniture.jpgWhat'sMissing?-WoodworksbyJohn-LasVegas-CustomFurnitureWhat's Missing? https://woodworksbyjohn.com/wp-content/uploads/2015/05/walnutbox-woodworksbyjohn-rear.jpgWalnutBox-WoodworksbyJohn-rearhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/walnutbox-woodworksbyjohn-front.jpgWalnutBox-WoodworksbyJohn-fronthttps://woodworksbyjohn.com/wp-content/uploads/2015/05/screen-shot-2015-05-14-at-2-24-17-pm.pngScreen Shot 2015-05-14 at 2.24.17 PMJet sold in 2 Days on Craigslithttps://woodworksbyjohn.com/wp-content/uploads/2015/05/lidchamfer-blockplane-3.jpglidchamfer-blockplane-3https://woodworksbyjohn.com/wp-content/uploads/2015/05/lidchamfer-blockplane-1.jpglidchamfer-blockplane-1https://woodworksbyjohn.com/wp-content/uploads/2015/05/lidchamfer-blockplane-2.jpglidchamfer-blockplane-2https://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetailed-pine-box-woodworksbyjohn-open.jpgDovetailed Pine Box-WoodworksbyJohn-Openhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetailed-pine-box-woodworksbyjohn-closed.jpgDovetailed Pine Box-WoodworksbyJohn-Closed2015-05-19T11:32:10+00:00monthlyhttps://woodworksbyjohn.com/2015/05/09/shop-happenings/https://woodworksbyjohn.com/wp-content/uploads/2015/05/armoireassembledstage2.jpgArmoireAssembledStage2Assembly Stage 2https://woodworksbyjohn.com/wp-content/uploads/2015/05/armoireassembledstage1.jpgArmoireAssembledStage1Stage one of Assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetaildrawerstretcher-6.jpgDovetailDrawerStretcher-66.) Finished with piece vertical in visehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetaildrawerstretcher-5.jpgDovetailDrawerStretcher-55.) Majority of material removed laying downhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetaildrawerstretcher-3.jpgDovetailDrawerStretcher-33.) Paring to the linehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetaildrawerstretcher-4.jpgDovetailDrawerStretcher-4https://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetaildrawerstretcher-2.jpgDovetailDrawerStretcher-22.) Cheek cutshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/dovetaildrawerstretcher-1.jpgDovetailDrawerStretcher-11.) Shoulder cut https://woodworksbyjohn.com/wp-content/uploads/2015/05/pinebox-handcutmortise-handle-7.jpgPineBox-HandcutMortise-Handle-76.) Glue/Clamp to lidhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/pinebox-handcutmortise-handle-51.jpgPineBox-HandcutMortise-Handle-55.) Checking final depth2015-05-18T13:01:17+00:00monthlyhttps://woodworksbyjohn.com/2015/05/03/carving-and-gilding-of-picture-frames/https://woodworksbyjohn.com/wp-content/uploads/2015/05/8x8distressed-complete.jpg8x8Distressed completeOregon Sunsethttps://woodworksbyjohn.com/wp-content/uploads/2015/05/12x12fresh.jpg12x12Freshhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/12x12-frame-complete.jpg12x12 Frame Completehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/8x8fresh.jpg8x8Freshhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/8x8framecomplete.jpg8x8FrameCompletehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/8x8covecomplete.jpg8x8CoveCompletehttps://woodworksbyjohn.com/wp-content/uploads/2015/05/8x8covefresh.jpg8x8CoveFresh2015-05-04T02:23:57+00:00monthlyhttps://woodworksbyjohn.com/2015/05/01/frame-carving-and-gilding/https://woodworksbyjohn.com/wp-content/uploads/2015/05/8x8frame.jpg8x8FrameDistressed Frame 8x8https://woodworksbyjohn.com/wp-content/uploads/2015/05/framecarving-woodworksbyjohn-veining.jpgFrameCarving-WoodworksbyJohn-Veining5.) Add veining with v-chiselhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/framecarving-woodworksbyjohn-toolsused.jpgFrameCarving-WoodworksbyJohn-ToolsUsedhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/framecarving-woodworksbyjohn-smoothbackground.jpgFrameCarving-WoodworksbyJohn-SmoothBackground4.) Smooth out background, specialty Pheil chiselshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/framecarving-woodworksbyjohn-specialtoolusage.jpgFrameCarving-WoodworksbyJohn-SpecialToolUsage2.) Using the skew and headlamp to see betterhttps://woodworksbyjohn.com/wp-content/uploads/2015/05/framecarving-woodworksbyjohn-groundout.jpgFrameCarving-WoodworksbyJohn-GroundOut3.) Grounding out with #3 fishtail, one of my favorite toolshttps://woodworksbyjohn.com/wp-content/uploads/2015/05/framecarving-woodworksbyjohn-firststep.jpgFrameCarving-WoodworksbyJohn-FirstStep1.) Define end of area, outline with golf ball handled skew2015-05-01T20:13:04+00:00monthlyhttps://woodworksbyjohn.com/2015/04/29/off-the-fence-details-details-details/https://woodworksbyjohn.com/wp-content/uploads/2015/04/boximage.jpgBoxImageFirst of Off the Fence Serieshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-lidsepartation-3.jpgOfftheFence-RusticBox-LidSepartation-33.) Cleaned up with block planehttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-lidsepartation-2.jpgOfftheFence-RusticBox-LidSepartation-22.) 1/16" or so piece remaininghttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-lidsepartation-1.jpgOfftheFence-RusticBox-LidSepartation-11.) Completing tablesaw cut with utility knifehttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-hardware-3.jpgOfftheFence-RusticBox-Hardware-33.) Spacer clamped between lid/box to locate hingeshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-hardware-4.jpgOfftheFence-RusticBox-Hardware-44.) Locating, fastening, and testing the actionhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-hardware-2.jpgOfftheFence-RusticBox-Hardware-22.) Trim router, chisel, gimlet, headlamphttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-rusticbox-hardware-1.jpgOfftheFence-RusticBox-Hardware-11.) After centering hasp and spacing, holes were pre-drilled with a gimlet2015-04-29T14:55:13+00:00monthlyhttps://woodworksbyjohn.com/2015/04/23/off-the-fence-a-new-box-series/https://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-prototype.jpgOfftheFence-PrototypeOff The Fencehttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-boxseries-etsystore-woodworksbyjohn-sprayshellac.jpgOfftheFence-BoxSeries-EtsyStore-WoodworksbyJohn-SprayShellacOutdoor Spray Areahttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-boxseries-etsystore-woodworksbyjohn-production-4.jpgOfftheFence-BoxSeries-EtsyStore-WoodworksbyJohn-Production-44.) Bottoms stamped, laid out, ready for assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-boxseries-etsystore-woodworksbyjohn-production-2.jpgOfftheFence-BoxSeries-EtsyStore-WoodworksbyJohn-Production-22.) Rabbet cut on top after sizing it for each boxhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-boxseries-etsystore-woodworksbyjohn-production-3.jpgOfftheFence-BoxSeries-EtsyStore-WoodworksbyJohn-Production-33.) Radius drawn to accommodate corner, formed on 1" belt sanderhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/offthefence-boxseries-etsystore-woodworksbyjohn-production-1.jpgOfftheFence-BoxSeries-EtsyStore-WoodworksbyJohn-Production-11.) Clamped together, groove for top and bottom cut2015-04-24T02:36:38+00:00monthlyhttps://woodworksbyjohn.com/2015/04/15/cigar-tray-complete-ready-for-delivery/https://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-customfurniture-lasvegas-glassbottom.jpgCigarPresentationTray-WoodworksbyJohn-CustomFurniture-LasVegas-GlassbottomClose up of Glasshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-customfurniture-lasvegas-cubanpeso-closeup.jpgCigarPresentationTray-WoodworksbyJohn-CustomFurniture-LasVegas-CubanPeso-Closeup4.) Final resultshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-customfurniture-lasvegas-cubanpeso-3.jpgCigarPresentationTray-WoodworksbyJohn-CustomFurniture-LasVegas-CubanPeso-33.) Five minute epoxy, centered and clampedhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-customfurniture-lasvegas-cubanpeso-2.jpgCigarPresentationTray-WoodworksbyJohn-CustomFurniture-LasVegas-CubanPeso-22.) Went with bit slightly larger than Peso, hole wasn't flat so needed to be trued uphttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-customfurniture-lasvegas-completed.jpgCigarPresentationTray-WoodworksbyJohn-CustomFurniture-LasVegas-CompletedCigar Presentation Tray2015-04-19T14:03:23+00:00monthlyhttps://woodworksbyjohn.com/2015/04/12/can-traditional-artists-skills-transfer-to-high-tech/https://woodworksbyjohn.com/wp-content/uploads/2015/04/computerrepair.jpgComputerRepairNew use for the kitchen islandhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/woodworksbyjohn-computerrepair.jpgWoodworksbyJohn-ComputerRepairTools of a Different Trade2015-04-12T15:25:29+00:00monthlyhttps://woodworksbyjohn.com/2015/04/11/cigar-presentation-tray-with-a-cuban-influence/https://woodworksbyjohn.com/wp-content/uploads/2015/04/glass1.jpgGlass1Glass sample for tray bottomhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-pesofitting.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-PesoFitting1.) Tried to enlarge 1" diameter hole but bevel of chisel created a ridgehttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-pattern-3.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-Pattern-33.) After tracing and cutting the Walnut piece on bandsaw, pattern attached and routedhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-pattern-4.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-Pattern-44.) Once sides are cut down to width, spokeshave used to true cornershttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-pattern-2.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-Pattern-22.) Curvature refined with rasp and sandpaperhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-fingerjoints.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-FingerjointsFinger Joint jig on Tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-pattern-1.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-Pattern-11.) Pattern drawn freehand on graph paper then cut on bandsaw.https://woodworksbyjohn.com/wp-content/uploads/2015/04/cigarpresentationtray-woodworksbyjohn-lasvegascustomfurniture-assembled.jpgCigarPresentationTray-WoodworksbyJohn-LasVegasCustomFurniture-AssembledAssembled Presentation Tray2015-04-12T11:18:02+00:00monthlyhttps://woodworksbyjohn.com/2015/04/10/how-to-add-keys-or-splines-to-a-mitered-box-cat-box-completed/https://woodworksbyjohn.com/wp-content/uploads/2015/04/catboxhardware-2.jpgCatboxHardware-2Gimlet in usehttps://woodworksbyjohn.com/wp-content/uploads/2015/04/catboxhardware-1.jpgCatboxHardware-1Fitting Hingeshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-view2.jpgJessCatBox-View2Back/Side view, notice the grain?https://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-separating-lid-2.jpgJessCatBox-Separating Lid-2All that remains to be planedhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-mitersplines-tablesawsplinejig-3.jpgJessCatBox-MiterSplines-TablesawSplineJig-3Tablesaw jig showing stop block.https://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-mitersplines-tablesawsplinejig-1.jpgJessCatBox-MiterSplines-TablesawSplineJig-1Box in place, ready to cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-mitersplines-tablesawsplinejig-2.jpgJessCatBox-MiterSplines-TablesawSplineJig-2Lines drawn on cradle to locate cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-mitersplines-separatinglid-2.jpgJessCatBox-MiterSplines-SeparatingLid-2Cut completed to separate lidhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-mitersplines-procedure-trimming.jpgJessCatBox-MiterSplines-Procedure-TrimmingPlaning flush after glue drieshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-mitersplines-procedure-glueup.jpgJessCatBox-MiterSplines-Procedure-GlueUpApplying the glue2015-04-10T23:54:55+00:00monthlyhttps://woodworksbyjohn.com/2015/04/08/how-i-made-a-stone-carvers-bench/https://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-complete-2.jpgStoneCarversBench-WoodworksbyJohn-Complete-2Front Viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-complete-1.jpgStoneCarversBench-WoodworksbyJohn-Complete-1A Stone-carvers benchhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-beginnings-4x4-b.jpgStoneCarversBench-WoodworksbyJohn-Beginnings-4x4-bDraw lines from each side of kerf, flip board and complete cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-beginnings-3.jpgStoneCarversBench-WoodworksbyJohn-Beginnings-3Transfer mounting holes from apron to legshttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-beginnings-4x4-a.jpgStoneCarversBench-WoodworksbyJohn-Beginnings-4x4-aMake initial cut as deep as possiblehttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-beginnings-2.jpgStoneCarversBench-WoodworksbyJohn-Beginnings-2Marking legs to correct lengthhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-beginnings-1.jpgStoneCarversBench-WoodworksbyJohn-Beginnings-1Squared Up Top Sectionhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/stonecarversbench-woodworksbyjohn-beginnings.jpgStoneCarversBench-WoodworksbyJohn-Beginnings-A pile of wood, glue, screws, and bolts2022-07-21T14:08:51+00:00monthlyhttps://woodworksbyjohn.com/2014/10/31/art-nouveau-inspired-picture-frame/https://woodworksbyjohn.com/wp-content/uploads/2014/10/art-nouveau-pictureframe-customwoodworker-woodworksbyjohn-6.jpgArt Nouveau-PictureFrame-CustomWoodworker-WoodworksbyJohn-6Hold, pivot, and never lose sight of the line!https://woodworksbyjohn.com/wp-content/uploads/2014/10/art-nouveau-pictureframe-customwoodworker-woodworksbyjohn-5.jpgArt Nouveau-PictureFrame-CustomWoodworker-WoodworksbyJohn-5Marples re-handled with Golf Ballhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/art-nouveau-pictureframe-customwoodworker-woodworksbyjohn-4.jpgArt Nouveau-PictureFrame-CustomWoodworker-WoodworksbyJohn-4Cutter extended on Marking Gaugehttps://woodworksbyjohn.com/wp-content/uploads/2014/10/art-nouveau-pictureframe-customwoodworker-woodworksbyjohn-3.jpgArt Nouveau-PictureFrame-CustomWoodworker-WoodworksbyJohn-3Scribing parallel lineshttps://woodworksbyjohn.com/wp-content/uploads/2014/10/art-nouveau-pictureframe-customwoodworker-woodworksbyjohn-2.jpgArt Nouveau-PictureFrame-CustomWoodworker-WoodworksbyJohn-2Preparing for the Carvehttps://woodworksbyjohn.com/wp-content/uploads/2014/10/art-nouveau-pictureframe-customwoodworker-woodworksbyjohn-1.jpgArt Nouveau-PictureFrame-CustomWoodworker-WoodworksbyJohn-1Carve Prototype2015-04-04T21:13:17+00:00monthlyhttps://woodworksbyjohn.com/2015/04/04/carving-and-gilding-a-cat-for-a-lid-or-plaque/https://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-burnishedsealer-woodworksbyjohn-etsycustomorder-11.jpgJessCatBox-BurnishedSealer-WoodworksbyJohn-EtsyCustomOrder-1Steel wooled burnisher/sealerhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/oilgilding-woodworksbyjohn-customfurniture-lasvegas.jpgOilGilding-WoodworksbyJohn-CustomFurniture-LasVegasBurnisher/Sealerhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-slowsetoil-woodworksbyjohn-etsycustomorder.jpgJessCatBox-SlowSetOil-WoodworksbyJohn-EtsyCustomOrder1.) Check size for correct "tack"https://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-woodworksbyjohn-etsycustomorder-carving-background.jpgJessCatBox-WoodworksbyJohn-EtsyCustomOrder-Carving-BackgroundAlmost satisfiedhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-coppergild-woodworksbyjohn-etsycustomorder-5.jpgJessCatBox-CopperGild-WoodworksbyJohn-EtsyCustomOrder-5Complete, dry for 24+ hours before sealinghttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-coppergild-woodworksbyjohn-etsycustomorder-4.jpgJessCatBox-CopperGild-WoodworksbyJohn-EtsyCustomOrder-4Sometimes a brush is useful in crevasses https://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-coppergild-woodworksbyjohn-etsycustomorder-3.jpgJessCatBox-CopperGild-WoodworksbyJohn-EtsyCustomOrder-34.) Press gently onto surface with fingershttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-coppergild-woodworksbyjohn-etsycustomorder-2.jpgJessCatBox-CopperGild-WoodworksbyJohn-EtsyCustomOrder-23.) Gently press down while sliding off of leaf layerhttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-carving-woodworksbyjohn-etsyorder-4.jpgJessCatBox-Carving-WoodworksbyJohn-EtsyOrder-4V-tool and small mallethttps://woodworksbyjohn.com/wp-content/uploads/2015/04/jesscatbox-coppergild-woodworksbyjohn-etsycustomorder-1.jpgJessCatBox-CopperGild-WoodworksbyJohn-EtsyCustomOrder-12.) Anchor leaf at top2015-04-04T15:21:04+00:00monthlyhttps://woodworksbyjohn.com/2015/03/31/how-to-make-a-mitered-box-on-the-tablesaw/https://woodworksbyjohn.com/wp-content/uploads/2015/03/woodworksbyjohn-etsycustomorder-gildedcatbox.jpgWoodworksbyJohn-EtsyCustomOrder-GildedCatBoxAll the parts fithttps://woodworksbyjohn.com/wp-content/uploads/2015/03/screen-shot-2015-02-09-at-7-07-21-pm.pngScreen Shot 2015-02-09 at 7.07.21 PMFree clip-art https://woodworksbyjohn.com/wp-content/uploads/2015/03/jesscatbox-carving-woodworksbyjohn-etsyorder-2.jpgJessCatBox-Carving-WoodworksbyJohn-EtsyOrder-2Transferring Design to Lidhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/atticus.jpgAtticushttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mitersled-tablesaw-miteredbox-technique-woodworksbyjohn-7.jpgMiterSled-TableSaw-MiteredBox-Technique-WoodworksbyJohn-76.) Lay pieces out as cut to maintain grain continuity, I use tape for markinghttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mitersled-tablesaw-miteredbox-technique-woodworksbyjohn-6.jpgMiterSled-TableSaw-MiteredBox-Technique-WoodworksbyJohn-6https://woodworksbyjohn.com/wp-content/uploads/2015/03/mitersled-tablesaw-miteredbox-technique-woodworksbyjohn-4.jpgMiterSled-TableSaw-MiteredBox-Technique-WoodworksbyJohn-44.) Flip piece over, remove the least amount of material to orient the miterhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mitersled-tablesaw-miteredbox-technique-woodworksbyjohn-5.jpgMiterSled-TableSaw-MiteredBox-Technique-WoodworksbyJohn-55.) Use a block that equals the difference between the short and long sides. You'll cut a long, then short, then long, and finally the last shorthttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mitersled-tablesaw-miteredbox-technique-woodworksbyjohn-3.jpgMiterSled-TableSaw-MiteredBox-Technique-WoodworksbyJohn-33.) Set stop block and make your cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mitersled-tablesaw-miteredbox-technique-woodworksbyjohn-2.jpgMiterSled-TableSaw-MiteredBox-Technique-WoodworksbyJohn-22.) After cutting one end, mark length of longest piece2015-04-01T03:32:52+00:00monthlyhttps://woodworksbyjohn.com/2015/03/18/mechanical-cellarette-final-details/https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocase-6.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCase-66.) Success!https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocase-4.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCase-44.) Cut …...https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocase-5.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCase-55.) Installed …...https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocase-3.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCase-33.) Measured at 7/8" long …...https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocase-2.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCase-22.) 1/4" Oak dowel radiusedhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocase-1.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCase-11.) Center established, pilot holes drilled, then taken to drill presshttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocasework-1.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCasework-1Squaring top to lifthttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-toptocasework-2.jpgMechanicalCellarette-WoodworksbyJohn-ToptoCasework-2Side Clearancehttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-liftmechanisminstall-5.jpgMechanicalCellarette-WoodworksbyJohn-LiftMechanismInstall-55.) Unit set into positionhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-liftmechanisminstall-4.jpgMechanicalCellarette-WoodworksbyJohn-LiftMechanismInstall-44.) Driven in by hand to avoid breakage2015-03-18T15:38:35+00:00monthlyhttps://woodworksbyjohn.com/2015/03/11/now-where-is-my-tape-measure-time-to-clean/https://woodworksbyjohn.com/wp-content/uploads/2015/03/black-1.jpgBlack-1Blacked outhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-dollies-woodworksbyjohn-1.jpgBubinga-MechanicalCellarette-Dollies-WoodworksbyJohn-1Front Viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/woodworksbyjohn-shoppanorama.jpgWoodworksbyJohn-ShopPanoramaTime to Clean! https://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-dollies-3-woodworksbyjohn.jpgBubinga-MechanicalCellarette-Dollies-3-WoodworksbyJohnHousing for Auton 1000-Ahttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-details-woodworksbyjohn-cornerblocks-3.jpgBubinga-MechanicalCellarette-Details-WoodworksbyJohn-CornerBlocks-3Hard wood!! https://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-dollies-2-woodworksbyjohn.jpgBubinga-MechanicalCellarette-Dollies-2-WoodworksbyJohnOpen Back Viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-details-woodworksbyjohn-cornerblocks-2.jpgBubinga-MechanicalCellarette-Details-WoodworksbyJohn-CornerBlocks-2Pre-drilled and countersunk holeshttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-details-woodworksbyjohn-cornerblocks-1.jpgBubinga-MechanicalCellarette-Details-WoodworksbyJohn-CornerBlocks-1Set up on Drillpresshttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-details-woodworksbyjohn-autonlift-4.jpgBubinga-MechanicalCellarette-Details-WoodworksbyJohn-AutonLift-44.) Completed box on lifthttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bubinga-mechanicalcellarette-details-woodworksbyjohn-autonlift-3.jpgBubinga-MechanicalCellarette-Details-WoodworksbyJohn-AutonLift-33.) Slot created with series of holes, adjustment works2015-03-14T02:37:50+00:00monthlyhttps://woodworksbyjohn.com/2015/03/06/tgif-assembled-cant-wait-until-tomorrow/https://woodworksbyjohn.com/wp-content/uploads/2015/03/tenons-mechanical-cellarette-woodworksbyjohn-lasvegas-customfurniture.jpgTenons-Mechanical Cellarette-WoodworksbyJohn-LasVegas-CustomFurnitureTrimming Tenonshttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mortises-mechanical-cellarette-woodworksbyjohn-lasvegas-customfurniture.jpgMortises-Mechanical Cellarette-WoodworksbyJohn-LasVegas-CustomFurniture1/2" Mortise for legshttps://woodworksbyjohn.com/wp-content/uploads/2015/03/firstfinishcoat-mechanical-cellarette-woodworksbyjohn-lasvegas-customfurniture.jpgFirstFinishCoat-Mechanical Cellarette-WoodworksbyJohn-LasVegas-CustomFurnitureCoat 1 of many! Tried and True Danish Oilhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/assembly-mechanical-cellarette-woodworksbyjohn-lasvegas-customfurniture-2.jpgAssembly-Mechanical Cellarette-WoodworksbyJohn-LasVegas-CustomFurniture-2Frontside Viewhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/bottomdetails-mechanical-cellarette-woodworksbyjohn-lasvegas-customfurniture.jpgBottomDetails-Mechanical Cellarette-WoodworksbyJohn-LasVegas-CustomFurnitureBottom Apronhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/assembly-mechanical-cellarette-woodworksbyjohn-lasvegas-customfurniture-1.jpgAssembly-Mechanical Cellarette-WoodworksbyJohn-LasVegas-CustomFurniture-1Backside View2015-03-07T14:32:05+00:00monthlyhttps://woodworksbyjohn.com/2015/03/03/finally-glue-up-of-bubinga-frame-and-panel/https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-workingbubinga-cardscraper-2.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-WorkingBubinga-CardScraper-23.) …. and pushedhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-workingbubinga-cardscraper-1.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-WorkingBubinga-CardScraper-12.) Card Scraper being pulled ….https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-workingbubinga-3.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-WorkingBubinga-34.) Results!https://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-workingbubinga-1.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-WorkingBubinga-1Smoothing tools for the Bubingahttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-workingbubinga-2.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-WorkingBubinga-21.) Chatter marks revealed by DNA wettinghttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-panel-1.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-Panel-1Rabbet Block Plane to fine tune joineryhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-bubinga-panelframe-assembly-3.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-Bubinga-Panel&Frame-Assembly-3Final, glued up sectionhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-bubinga-panelframe-assembly-2.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-Bubinga-Panel&Frame-Assembly-2Clamps and cauls readyhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-bubinga-horizontal-tenon-2.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-Bubinga-Horizontal-Tenon-2Japanese Razor Sawhttps://woodworksbyjohn.com/wp-content/uploads/2015/03/mechanicalcellarette-woodworksbyjohn-lasvegasfurnituremaker-bubinga-panelframe-assembly-1.jpgMechanicalCellarette-WoodworksbyJohn-LasVegasFurnituremaker-Bubinga-Panel&Frame-Assembly-1Dry fit and label all pieces2015-03-03T15:22:07+00:00monthlyhttps://woodworksbyjohn.com/2015/02/24/creating-the-panel-frame-mechanical-cellarette/https://woodworksbyjohn.com/wp-content/uploads/2015/02/panelframe-woodworksbyjohn-customfurniture-readyforshaper.jpgPanel&Frame-WoodworksbyJohn-CustomFurniture-ReadyforShaperEnd panels labeled for shaping. https://woodworksbyjohn.com/wp-content/uploads/2015/02/panelframe-woodworksbyjohn-customfurniture-preparing-stock.jpgPanel&Frame-WoodworksbyJohn-CustomFurniture-Preparing stockInitial Planing of Stockhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/panelframe-woodworksbyjohn-customfurniture-panels-1.jpgPanel&Frame-WoodworksbyJohn-CustomFurniture-Panels-13.) Reducing edge to fit framehttps://woodworksbyjohn.com/wp-content/uploads/2015/02/panelframe-woodworksbyjohn-customfurniture-math-1.jpgPanel&Frame-WoodworksbyJohn-CustomFurniture-Math-12.) Panels cut after much math and practice cutting on scraphttps://woodworksbyjohn.com/wp-content/uploads/2015/02/panelframe-woodworksbyjohn-customfurniture-aftershaping.jpgPanel&Frame-WoodworksbyJohn-CustomFurniture-AfterShapingReady for Panelshttps://woodworksbyjohn.com/wp-content/uploads/2015/02/panelframe-woodworksbyjohn-customfurniture-dryfit.jpgPanel&Frame-WoodworksbyJohn-CustomFurniture-Dryfit4.) First assembly of front panelhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/mechanicalcellarette-shapersetup-woodworksbyjohn-customfurniture-3.jpgMechanicalCellarette-ShaperSetUp-WoodworksbyJohn-CustomFurniture-31.) Close up of coped endhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/mechanicalcellarette-shapersetup-woodworksbyjohn-customfurniture-1.jpgMechanicalCellarette-ShaperSetUp-WoodworksbyJohn-CustomFurniture-1Squaring miter gaugehttps://woodworksbyjohn.com/wp-content/uploads/2015/02/mechanicalcellarette-shapersetup-woodworksbyjohn-customfurniture-2.jpgMechanicalCellarette-ShaperSetUp-WoodworksbyJohn-CustomFurniture-22015-02-25T04:39:10+00:00monthlyhttps://woodworksbyjohn.com/2015/02/23/hand-tool-class-ends/https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-8.jpgHandToolClass-2015-Wooditis-JohnEugster-8https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-6.jpgHandToolClass-2015-Wooditis-JohnEugster-6https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-5.jpgHandToolClass-2015-Wooditis-JohnEugster-5https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-4.jpgHandToolClass-2015-Wooditis-JohnEugster-4https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-3.jpgHandToolClass-2015-Wooditis-JohnEugster-3https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-2.jpgHandToolClass-2015-Wooditis-JohnEugster-2https://woodworksbyjohn.com/wp-content/uploads/2015/02/handtoolclass-2015-wooditis-johneugster-1.jpgHandToolClass-2015-Wooditis-JohnEugster-12015-02-24T04:14:10+00:00monthlyhttps://woodworksbyjohn.com/2015/02/20/inlaying-marble-in-a-bubinga-top/https://woodworksbyjohn.com/wp-content/uploads/2015/02/wooworksbyjohn-mechanicalcellarette-customfurniture-lasvegas.jpgWooworksbyJohn-MechanicalCellarette-CustomFurniture-LasVegasGlued up and curinghttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-routertable-set-up.jpgWoodworksbyJohn-RouterTable set upRouter table to cut groove https://woodworksbyjohn.com/wp-content/uploads/2015/02/mechanicalcellarette-italianmarble-woodworksbyjohn-customfurniture.jpgMechanicalCellarette-ItalianMarble-WoodworksbyJohn-CustomFurniture-First Look at Marble and Tophttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-mechanicalcellarette-tenons-3.jpgWoodworksbyJohn-MechanicalCellarette-Tenons-3Rabbet block plane to adjust cheekshttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-mechanicalcellarette-tenons-2.jpgWoodworksbyJohn-MechanicalCellarette-Tenons-2Chisel to pare shouldershttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-mechanicalcellarette-tenons-1.jpgWoodworksbyJohn-MechanicalCellarette-Tenons-1Dovetail saw to size tenonhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-mechanicalcellarette-l-fence.jpgWoodworksbyJohn-MechanicalCellarette-L fenceL-Fence on Tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-draftingdesk-bookstorage-spaltedmaple.jpgWoodworksbyJohn-DraftingDesk-BookStorage-SpaltedMaple2015-02-20T23:49:32+00:00monthlyhttps://woodworksbyjohn.com/2015/02/16/fitting-lee-valley-brass-leg-tip-01a4535/https://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-8.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-85.) Take light cuts, sneak up on fit. Sometimes it's best to skew planehttps://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-6.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-64.) Begin planing, remember it doesn't have to be pretty, --- just needs to fit!https://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-7.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-7https://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-5.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-53.) Bottom of tip should fit bottom of leghttps://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-4.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-42.) Cut on Bandsaw, flip leg 90 degrees and mark other sidehttps://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-3.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-31.) Lay out angles on tiphttps://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-1.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-1Smooth Plane on tapershttps://woodworksbyjohn.com/wp-content/uploads/2015/02/leevalleylegcap01a4535-howtoinstall-woodworksbyjohn-2.jpgLeeValleyLegCap#01A4535-HowToInstall-WoodworksbyJohn-2Determining Tip Anglehttps://woodworksbyjohn.com/wp-content/uploads/2015/02/brasslegcaps-howto-bubinga-woodworksbyjohn-customfurniture-8.jpgBrassLegCaps-HowTo-Bubinga-WoodworksbyJohn-CustomFurniture-8Tops of legs marked for positionhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/brasslegcaps-howto-bubinga-woodworksbyjohn-customfurniture-7.jpgBrassLegCaps-HowTo-Bubinga-WoodworksbyJohn-CustomFurniture-76.) Finally fits, one brad hole and friction holds it on.2015-02-17T18:34:28+00:00monthlyhttps://woodworksbyjohn.com/2015/02/11/work-begins-on-latest-commission/https://woodworksbyjohn.com/wp-content/uploads/2015/02/mechanical-cellarette-woodworksbyjohn-originaldesign.jpgMechanical Cellarette-WoodworksbyJohn-OriginalDesignhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-bubinga-mechanicalcellarette-customfurniture-resawn.jpgWoodworksbyJohn-Bubinga-MechanicalCellarette-CustomFurniture-ResawnRe-sawing top materialhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-bubinga-mechanicalcellarette-customfurniture-1.jpgWoodworksbyJohn-Bubinga-MechanicalCellarette-CustomFurniture-18/4 Bubinga ready to cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-bubinga-mechanicalcellarette-customfurniture-pre-sized.jpgWoodworksbyJohn-Bubinga-MechanicalCellarette-CustomFurniture-Pre-sizedDays end resulthttps://woodworksbyjohn.com/wp-content/uploads/2015/02/mechanicalcellarette-woodworksbyjohn-customfurniture-lasvegas.jpgMechanicalCellarette-WoodworksbyJohn-CustomFurniture-LasVegasBrass Leg Cup on Poplar2015-02-11T16:25:45+00:00monthlyhttps://woodworksbyjohn.com/2015/02/09/nicks-media-stand-delivered/https://woodworksbyjohn.com/wp-content/uploads/2015/02/woodworksbyjohn-lasvegas-mediacenter.jpgWoodworksbyJohn-LasVegas-MediaCenterNicks' Media Stand in placehttps://woodworksbyjohn.com/wp-content/uploads/2015/02/wooditis-handtool-class-johneugster-session4-3.jpgWooditIs-Handtool Class-JohnEugster-Session4-3https://woodworksbyjohn.com/wp-content/uploads/2015/02/wooditis-handtool-class-johneugster-session4-2.jpgWooditIs-Handtool Class-JohnEugster-Session4-2https://woodworksbyjohn.com/wp-content/uploads/2015/02/wooditis-handtool-class-johneugster-session4-1.jpgWooditIs-Handtool Class-JohnEugster-Session4-1https://woodworksbyjohn.com/wp-content/uploads/2015/02/nicksmediacabinet-woodworksbyjohn-customfurniture-lasvegas-4.jpgNicksMediaCabinet-WoodworksbyJohn-CustomFurniture-LasVegas-4Drawer Unithttps://woodworksbyjohn.com/wp-content/uploads/2015/02/nicksmediacabinet-woodworksbyjohn-customfurniture-lasvegas-2.jpgNicksMediaCabinet-WoodworksbyJohn-CustomFurniture-LasVegas-2Media Cabinethttps://woodworksbyjohn.com/wp-content/uploads/2015/02/nicksmediacabinet-woodworksbyjohn-customfurniture-lasvegas-3.jpgNicksMediaCabinet-WoodworksbyJohn-CustomFurniture-LasVegas-3Drawer Detailhttps://woodworksbyjohn.com/wp-content/uploads/2015/02/nicksmediacabinet-woodworksbyjohn-customfurniture-lasvegas-1.jpgNicksMediaCabinet-WoodworksbyJohn-CustomFurniture-LasVegas-1Inspiration Photo2015-02-09T17:34:42+00:00monthlyhttps://woodworksbyjohn.com/2015/01/26/2424/https://woodworksbyjohn.com/wp-content/uploads/2015/01/dsc03307.jpgDSC033073.) Attach drawer member on center linehttps://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfront.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFrontDrawer Unithttps://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-8.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-8Notching bottom boards to fit around legshttps://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-7.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-7Making progress as you can see!https://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-6.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-64.) Attach phony drawer front to adjust slideshttps://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-5.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-52.) Locate center line on drawer boxhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-4.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-41.) Use set up stick to locate inside drawer box accurately https://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-3.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-3https://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-2.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-2How's that go?https://woodworksbyjohn.com/wp-content/uploads/2015/01/tvstand-reclaimedwood-woodworksbyjohn-drawerfitting-1.jpgTVStand-ReclaimedWood-WoodworksbyJohn-DrawerFitting-12015-02-03T00:53:24+00:00monthlyhttps://woodworksbyjohn.com/2015/01/31/hand-tool-class-session-3/https://woodworksbyjohn.com/wp-content/uploads/2015/01/handtoolclass-wooditis-lasvegas-johneugster-4.jpgHandToolClass-Wooditis-LasVegas-JohnEugster-4Tool Totehttps://woodworksbyjohn.com/wp-content/uploads/2015/01/handtoolclass-wooditis-lasvegas-johneugster-3.jpgHandToolClass-Wooditis-LasVegas-JohnEugster-3https://woodworksbyjohn.com/wp-content/uploads/2015/01/handtoolclass-wooditis-lasvegas-johneugster-2.jpgHandToolClass-Wooditis-LasVegas-JohnEugster-2https://woodworksbyjohn.com/wp-content/uploads/2015/01/handtoolclass-wooditis-lasvegas-johneugster-1.jpgHandToolClass-Wooditis-LasVegas-JohnEugster-12015-02-01T03:44:41+00:00monthlyhttps://woodworksbyjohn.com/2015/01/22/all-the-parts-have-arrived/https://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-tracksaw.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-TrackSawhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-legbracket.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-LegBracketLeg Bracket Errorhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-firstlooks.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-FirstLooksMock up and first visual https://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-drillpresssetup-straightholes.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-DrillPresssetup-straightholes1.) Holes pre-drilled 3/8" from edgehttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-assemblyprocess-finished.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-AssemblyProcess-Finished3.) Checking for square, secured at backhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-assemblyprocess-5.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-AssemblyProcess-52.) Assembling one section at a timehttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-assemblyprocess-4.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-AssemblyProcess-41.) Pre-drilling top and bottomhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-assemblyprocess-3.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-AssemblyProcess-34.) Guide insures square assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-assemblyprocess-2.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-AssemblyProcess-23.) Second piece insertedhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/televisionstand-reclaimedwood-woodworksbyjohn-assemblyprocess-1.jpgTelevisionStand-ReclaimedWood-WoodworksbyJohn-AssemblyProcess-12.) One piece clamped to guide2015-01-25T03:52:15+00:00monthlyhttps://woodworksbyjohn.com/2015/01/19/so-many-projects-thank-goodness-plenty-of-time/https://woodworksbyjohn.com/wp-content/uploads/2015/01/stanley-chisel-1.jpgstanley chisel 11970's era chiselhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/stanley-2.jpgstanley 2https://woodworksbyjohn.com/wp-content/uploads/2015/01/firstpanel-dryfit.jpgFirstPanel-DryFitDry Fit, Loving the Wood!2015-01-20T03:43:23+00:00monthlyhttps://woodworksbyjohn.com/2015/01/19/of-tools-and-wood/2015-01-21T00:26:30+00:00monthlyhttps://woodworksbyjohn.com/2015/01/16/things-ive-read-now-put-to-the-test/https://woodworksbyjohn.com/wp-content/uploads/2015/01/softpinecaul.jpgSoftPineCaulSoft Pine caul with pin impressionshttps://woodworksbyjohn.com/wp-content/uploads/2015/01/mdfcaul.jpgMDFCaulMDF Caulhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/pinewoes.jpgPineWoesClear Pine; Radiatahttps://woodworksbyjohn.com/wp-content/uploads/2015/01/handcutdovetails-maskingtape-woodworksbyjohn-glueup-1.jpgHandcutDovetails-Maskingtape-WoodworksbyJohn-Glueup-1Glue uphttps://woodworksbyjohn.com/wp-content/uploads/2015/01/handcutdovetails-maskingtape-woodworksbyjohn-experiment-3.jpgHandcutDovetails-Maskingtape-WoodworksbyJohn-Experiment-3https://woodworksbyjohn.com/wp-content/uploads/2015/01/handcutdovetails-maskingtape-woodworksbyjohn-experiment-2.jpgHandcutDovetails-Maskingtape-WoodworksbyJohn-Experiment-2Shoulder needed to be recuthttps://woodworksbyjohn.com/wp-content/uploads/2015/01/handcutdovetails-maskingtape-woodworksbyjohn-experiment-1.jpgHandcutDovetails-Maskingtape-WoodworksbyJohn-Experiment-1Pin board taped, ready to scribehttps://woodworksbyjohn.com/wp-content/uploads/2015/01/handcutdovetails-maskingtape-woodworksbyjohn-assembled.jpgHandcutDovetails-Maskingtape-WoodworksbyJohn-assembledClamped up with soft Pine cauls2017-03-10T17:18:33+00:00monthlyhttps://woodworksbyjohn.com/2015/01/13/back-in-teacher-mode/2015-01-13T18:36:53+00:00monthlyhttps://woodworksbyjohn.com/2015/01/08/dowel-making-video-my-first-hi-tech-attempt/2015-01-09T15:29:10+00:00monthlyhttps://woodworksbyjohn.com/2015/01/06/difference-between-a-good-woodworker-and-one-not-so-good/https://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-8.jpgDovetailRepair-Process-WoodworksbyJohn-88.) Rabbet block plane and chisel for final fithttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-7.jpgDovetailRepair-Process-WoodworksbyJohn-77.) Depth of socket markedhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-6.jpgDovetailRepair-Process-WoodworksbyJohn-66.) Shoulders cleaned up as neededhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-5.jpgDovetailRepair-Process-WoodworksbyJohn-55.) Top planed and sides cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-4.jpgDovetailRepair-Process-WoodworksbyJohn-44.) Dried overnight resulting repairhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-3.jpgDovetailRepair-Process-WoodworksbyJohn-33.) Piece glued on after smoothinghttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-2.jpgDovetailRepair-Process-WoodworksbyJohn-22.) Damaged area cut awayhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-process-woodworksbyjohn-1.jpgDovetailRepair-Process-WoodworksbyJohn-11.) Marking gauge to establish amount to be removedhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-before-woodworksbyjohn.jpgDovetailRepair-Before-WoodworksbyJohn-Before, grain blew out!https://woodworksbyjohn.com/wp-content/uploads/2015/01/dovetailrepair-after-woodworksbyjohn.jpgDovetailRepair-After-WoodworksbyJohn-After, piece scabbed on and fitted2015-01-07T01:20:28+00:00monthlyhttps://woodworksbyjohn.com/2015/01/03/drawer-web-frame-my-approach-for-the-armoire/https://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-tenonjig.jpgJohn'sArmoire-WoodworksbyJohn-tenonjig2.) One tenon cheek cut offsethttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-mortisetenon-fitting.jpgJohn'sArmoire-WoodworksbyJohn-Mortise&Tenon-Fittinghttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-mockup.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-MockupOffset drawer web framehttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-dado.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-DadoSide guide offset in webhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-7d.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-7d4.) Pare as needed, also chamfer ends of the tenonhttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-7c.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-7c3.) Follow with shoulder cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-7b.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-7b2.) Make cheek cuthttps://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-7a.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-7a1.) Scribe length of tenon on cheek = 1"https://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-6.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-6https://woodworksbyjohn.com/wp-content/uploads/2015/01/johnsarmoire-woodworksbyjohn-drawerweb-5.jpgJohn'sArmoire-WoodworksbyJohn-DrawerWeb-53.) Measuring for offset with ruler for spacing2015-01-04T01:48:59+00:00monthlyhttps://woodworksbyjohn.com/2014/12/31/cutting-tenons-end-of-year-thoughts/https://woodworksbyjohn.com/wp-content/uploads/2014/12/woodworksbyjohn-lasvegas-customfurniture-dovetailsaws.jpgWoodworksbyJohn-LasVegas-CustomFurniture-DovetailSawsBeeswax vs. Cold Metalhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/woodworksbyjohn-lasvegas-customfurniture-cold.jpgWoodworksbyJohn-LasVegas-CustomFurniture-ColdAround 8:00 am, Dec. 31st.https://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-8.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-84.) After a bit of fitting; one down and nineteen to go!https://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-7.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-73.)My tool of choice for fitting them is a rabbet block planehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-6.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-62.) After cutting, pare shoulders if neededhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-5.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-51.) Locate tenons and haunch as required https://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-4.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-44.) Adjust dado head to scribed linehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-3.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-33.) Marking gauge to determine tenon thicknesshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-2.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-22.) Scribe line at end of cut and set stop block for tenon lengthhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/tutorial-tenons-tablesaw-woodworksbyjohn-tutorial-1.jpgTutorial-Tenons-Tablesaw-WoodworksbyJohn-Tutorial-11.) Dado head and auxiliary fence, make shallow cut2015-01-01T17:53:18+00:00monthlyhttps://woodworksbyjohn.com/2014/12/30/2014-in-review/2014-12-31T01:06:14+00:00monthlyhttps://woodworksbyjohn.com/2014/12/26/drawbored-mortise-and-tenon-my-method/https://woodworksbyjohn.com/wp-content/uploads/2014/12/workbenchpanoramic-woodworksbyjohn.jpgWorkbenchPanoramic-WoodworksbyJohnPanoramic Bench Set-uphttps://woodworksbyjohn.com/wp-content/uploads/2014/12/image-2.jpgImage 2Fancy golf ball handlehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboremarkingtool.jpgDrawboreMarkingToolCreating a center pointhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-layout.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-LayoutMDF used to check set uphttps://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-drawborepractice-5.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-DrawBorePractice-5Cut off, planed, drawbored mortise and tenon joint completehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-drawborepractice-4.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-DrawBorePractice-4Drawbored in placehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-drawborepractice-3.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-DrawBorePractice-3Peg "sharpened" for ease of insertion https://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-drawborepractice-2.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-DrawBorePractice-2Hole highlighted, arrow shows direction to move center https://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-drawborepractice-1.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-DrawBorePractice-1Using rod to locate hole (no handle yet)https://woodworksbyjohn.com/wp-content/uploads/2014/12/drawboredmortisetenon-woodworksbyjohn-armoire-tenon-5.jpgDrawboredMortiseTenon-WoodworksbyJohn-Armoire-Tenon-5Rabbet block plane to fine tune mortise2014-12-27T16:57:47+00:00monthlyhttps://woodworksbyjohn.com/2014/12/19/sculpted-cargo-shorts-work-diary/https://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-front.jpgSculptedShorts-WoodworksbyJohn-FrontHeavy Starchhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-detail-3.jpgSculptedShorts-WoodworksbyJohn-Detail-3Front Coin Pocket Detailhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-detail-2.jpgSculptedShorts-WoodworksbyJohn-Detail-2Rear Pockets Detailhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-detail-1.jpgSculptedShorts-WoodworksbyJohn-Detail-1Rear Pocket Detailhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-back.jpgSculptedShorts-WoodworksbyJohn-BackSculpted Shorts Backhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-actual-front.jpgSculptedShorts-WoodworksbyJohn-Actual-FrontModel Shorts Fronthttps://woodworksbyjohn.com/wp-content/uploads/2014/12/sculptedshorts-woodworksbyjohn-actual-back.jpgSculptedShorts-WoodworksbyJohn-Actual-BackModel Shorts Backhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/progress8-30.jpgProgress8-30Rear Viewhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/progress-8-30-front.jpgProgress-8-30-frontFront Viewhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/carvingcloth-spokeshaveedge.jpgCarvingCloth-SpokeshaveEdge2014-12-20T15:00:56+00:00monthlyhttps://woodworksbyjohn.com/2014/12/18/panels-and-lap-joints/https://woodworksbyjohn.com/wp-content/uploads/2014/12/preparing-panel.jpgPreparing Panelhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/woodworksbyjohn-sawtableassemblytable.jpgWoodworksbyJohn-SawTable=AssemblyTableTablesaw aka Clamping Tablehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-7.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-7Marked after fitting -- I'm up to F!https://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-6.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-6Setting #71 for depthhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-5.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-5Checked for squarehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-4.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-4Adjustment wheel flipped over to gain 1/8" of depthhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-3.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-3On my toes!https://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-2.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-2Notch to aid starting the sawhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/lapjoint-armoire-handcut-woodworksbyjohn-1.jpgLapJoint-Armoire-Handcut-WoodworksbyJohn-1Lap Joint at end of Center Stile2014-12-18T16:23:29+00:00monthlyhttps://woodworksbyjohn.com/2014/12/17/a-much-needed-neighborly-diversion/https://woodworksbyjohn.com/wp-content/uploads/2014/12/neighborlydiversion-woodworksbyjohn-5.jpgNeighborlyDiversion-WoodworksbyJohn-5Wine Bottle Storagehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/neighborlydiversion-woodworksbyjohn-4.jpgNeighborlyDiversion-WoodworksbyJohn-4Gimlet in Usehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/neighborlydiversion-woodworksbyjohn-3.jpgNeighborlyDiversion-WoodworksbyJohn-3https://woodworksbyjohn.com/wp-content/uploads/2014/12/neighborlydiversion-woodworksbyjohn-2.jpgNeighborlyDiversion-WoodworksbyJohn-2Washer & Pencil Radiushttps://woodworksbyjohn.com/wp-content/uploads/2014/12/neighborlydiversion-woodworksbyjohn-1.jpgNeighborlyDiversion-WoodworksbyJohn-1Smooth Plane2014-12-18T00:32:59+00:00monthlyhttps://woodworksbyjohn.com/2014/12/13/measuring-marking-keeping-organized/https://woodworksbyjohn.com/wp-content/uploads/2014/12/woodworksbyjohn-customfurniture-lasvegas.jpgWoodworksbyJohn-CustomFurniture-LasVegasMachinists Stampshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-carcass-dovetails-4.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-Carcass-Dovetails-4Flatten Bottom of Jointhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-carcass-dovetails-3.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-Carcass-Dovetails-3Angled to Sides from Centerhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-carcass-dovetails-2.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-Carcass-Dovetails-2Angle From Center to Edgehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-carcass-dovetails-1.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-Carcass-Dovetails-1https://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-carcass-dovetails.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-Carcass-Dovetails-Beginning The Processhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-4.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-4Darken Scribed Lineshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-3.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-3Temporary Markingshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-2.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-2Second Stretcherhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-layout-woodworksbyjohn-armoire-1.jpgCustomFurniture-Layout-WoodworksbyJohn-Armoire-1Locating Bottom Stretcher2014-12-13T21:48:57+00:00monthlyhttps://woodworksbyjohn.com/2014/12/09/armoire-work-begins-outer-legs/https://woodworksbyjohn.com/wp-content/uploads/2014/12/experiment3.jpgExperiment3Reclaimed Fence Boards to pay the billshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-layout.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-LayoutLay-Out of Drawer Stretchershttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-9.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-9One down -- Seven to go!https://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-7.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-7After scribing, I use a Stanley 271 to scribe bottom of tailhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-6.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-6Transferring Dovetailshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-5.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-5Check for square, adjust if neededhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-4.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-4Before shoulder cuts, remove wedge to aid sawinghttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-3.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-3Lines penciled in for better visibility!https://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-2.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-21:6 Tail scribed on endhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/customfurniture-lasvegas-woodworksbyjohn-armoire-legs-dovetails-1.jpgCustomFurniture-LasVegas-WoodworksbyJohn-Armoire-Legs-Dovetails-1Tenon jig and tablesaw for first cuts2014-12-10T02:36:58+00:00monthlyhttps://woodworksbyjohn.com/2014/12/04/preparing-a-hock-blade-for-my-7/https://woodworksbyjohn.com/wp-content/uploads/2014/12/johnsarmoire-practicedovetail.jpgJohn'sArmoire-PracticeDovetailhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-sharpness.jpgHockToolsBlade-Preparation-WoodworksbyJohn-SharpnessYep, That's Sharp!https://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-proof.jpgHockToolsBlade-Preparation-WoodworksbyJohn-proofThe proof is in the Shavings!https://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-microbevel.jpgHockToolsBlade-Preparation-WoodworksbyJohn-microbevel4K, then 8K and Secondary Bevelhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-4.jpgHockToolsBlade-Preparation-WoodworksbyJohn-4Problematic Cornerhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-3.jpgHockToolsBlade-Preparation-WoodworksbyJohn-3Checked for Square -- Looks Goodhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-2.jpgHockToolsBlade-Preparation-WoodworksbyJohn-2Back to 1K Waterstonehttps://woodworksbyjohn.com/wp-content/uploads/2014/12/hocktoolsblade-preparation-woodworksbyjohn-1.jpgHockToolsBlade-Preparation-WoodworksbyJohn-1Initial Work--4K Wetstone2014-12-05T02:13:44+00:00monthlyhttps://woodworksbyjohn.com/2014/12/01/johns-armoire-first-cuts/https://woodworksbyjohn.com/wp-content/uploads/2014/12/johns-armoire-dividers.jpgJohns Armoire-DividersStepping off the Widthhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/johns-armoire-1.jpgJohns Armoire-1Posts and Drawer Dividershttps://woodworksbyjohn.com/wp-content/uploads/2014/12/johns-armoire-resawingwood-woodworksbyjohn-lasvegas-customfurniture-3.jpgJohn's Armoire-ReSawingWood-WoodworksbyJohn-LasVegas-CustomFurniture-3First slice for the end panelshttps://woodworksbyjohn.com/wp-content/uploads/2014/12/johns-armoire-resawingwood-woodworksbyjohn-lasvegas-customfurniture-2.jpgJohn's Armoire-ReSawingWood-WoodworksbyJohn-LasVegas-CustomFurniture-2Panels for Ends and Doorhttps://woodworksbyjohn.com/wp-content/uploads/2014/12/johns-armoire-resawingwood-woodworksbyjohn-lasvegas-customfurniture-1.jpgJohn's Armoire-ReSawingWood-WoodworksbyJohn-LasVegas-CustomFurniture-1At The Bandsaw2014-12-01T22:35:29+00:00monthlyhttps://woodworksbyjohn.com/2014/11/25/art-nouveau-frame-update-and-fixes/https://woodworksbyjohn.com/wp-content/uploads/2014/11/artnueveu-frame.jpgArtNueveu Framehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/briwax.jpgBriwaxBriWax = more Solventhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-silverleaf-pictureframe-original.jpgArtNouveauFrame-WoodworksbyJohn-SilverLeaf-PictureFrame-OriginalOriginal Framehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-silverleaf-cornerdetail.jpgArtNouveauFrame-WoodworksbyJohn-SilverLeaf-CornerDetailCorner Detail of Framehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-silverleaf.jpgArtNouveauFrame-WoodworksbyJohn-SilverLeaf-New Art Nouveau Framehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-samplecomplete-e1416971620889.jpgArtNouveauFrame-WoodworksbyJohn-SampleCompleteCompleted Samplehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-rubback-liberon-2.jpgArtNouveauFrame-WoodworksbyJohn-RubBack-Liberon-2Sight Edge almost Donehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-rubback-liberon-1.jpgArtNouveauFrame-WoodworksbyJohn-RubBack-Liberon-1Beginning the Sight Edge with Cotton Ballhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-rubback-briwax-qtip.jpgArtNouveauFrame-WoodworksbyJohn-RubBack-BriWax-QtipMore Control with Q-tiphttps://woodworksbyjohn.com/wp-content/uploads/2014/11/artnouveauframe-woodworksbyjohn-rubback-briwax-cheesecloth.jpgArtNouveauFrame-WoodworksbyJohn-RubBack-BriWax-CheeseclothRagged off with BriWax2014-11-26T19:19:41+00:00monthlyhttps://woodworksbyjohn.com/2014/11/20/art-nouveau-frame-tale-of-woe/https://woodworksbyjohn.com/wp-content/uploads/2014/11/woodworksbyjohn-customfurniture-lasvegas-mahogany-drwga.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Mahogany-DrwgAJohn's Armoire Planhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/woodworksbyjohn-customfurniture-lasvegas-mahogany-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Mahogany-2Wow, this is wide!https://woodworksbyjohn.com/wp-content/uploads/2014/11/woodworksbyjohn-customfurniture-lasvegas-mahogany-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Mahogany-18/4 Genuine Mahoganyhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/woodworksbyjohn-customfurniture-artnuveauframe.jpgWoodworksbyJohn-CustomFurniture-ArtNuveauFrameClayed and Gilded, Ready for Paint2014-11-20T18:06:05+00:00monthlyhttps://woodworksbyjohn.com/2014/11/13/etsy-box-order-almost-ready-to-ship/2014-11-14T01:12:53+00:00monthlyhttps://woodworksbyjohn.com/2014/11/13/break-from-the-routine-road-trip/https://woodworksbyjohn.com/wp-content/uploads/2014/11/fosterplaningmill-1.jpgFosterPlaningMill-180 Feet of Seconds Moldinghttps://woodworksbyjohn.com/wp-content/uploads/2014/11/fosterplaningmill-logo.jpgFosterPlaningMill Logohttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-woodworksbyjohn-lasvegas-dovetailboxes-4.jpgEtsyCustomOrder-WoodworksbyJohn-LasVegas-DovetailBoxes-4Beveling the lid at 15 degreeshttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-woodworksbyjohn-lasvegas-dovetailboxes-3.jpgEtsyCustomOrder-WoodworksbyJohn-LasVegas-DovetailBoxes-3https://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-woodworksbyjohn-lasvegas-dovetailboxes-2.jpgEtsyCustomOrder-WoodworksbyJohn-LasVegas-DovetailBoxes-2Drilling holes for pinshttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-woodworksbyjohn-lasvegas-dovetailboxes-1.jpgEtsyCustomOrder-WoodworksbyJohn-LasVegas-DovetailBoxes-1Radius on the corner of the bottom piecehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-woodworksbyjohn-lasvegas-1.jpgEtsyCustomOrder-WoodworksbyJohn-LasVegas-1Nothing like the smell of Shellac in the morning!2014-11-13T17:53:40+00:00monthlyhttps://woodworksbyjohn.com/2014/11/07/etsy-custom-order-two-boxes-continued/https://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-layout-3.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-LayOut-3Cut to line after penciling it inhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-layout-2.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-LayOut-2Lines extended to shoulderhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-layout-1.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-LayOut-1Tail transferred to edge of boardhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-boxes.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-BoxesPile of Boxes!https://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-5.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-5Initial cuts on shoulder linehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-3.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-3Half removed from one sidehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-2.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-2Flip board over and remove the resthttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-dovetailedbox-woodworksbyjohn-lasvegas-1.jpgEtsyCustomOrder-DovetailedBox-WoodworksbyJohn-LasVegas-1Pile of Pins2015-08-28T02:16:25+00:00monthlyhttps://woodworksbyjohn.com/2014/11/04/etsy-custom-order-two-boxes/https://woodworksbyjohn.com/wp-content/uploads/2014/11/screen-shot-2014-11-04-at-1-49-16-pm.pngScreen Shot 2014-11-04 at 1.49.16 PMChinese Checker Sethttps://woodworksbyjohn.com/wp-content/uploads/2014/11/lie-nielsendowelplate-howto-woodworksbyjohn-lasvegaswoodworker-6.jpgLie-NielsenDowelPlate-Howto-WoodworksbyJohn-LasVegasWoodworker-6Bottom has slightly larger holes to help guide dowel being madehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/lie-nielsendowelplate-howto-woodworksbyjohn-lasvegaswoodworker-5.jpgLie-NielsenDowelPlate-Howto-WoodworksbyJohn-LasVegasWoodworker-5This is my dowel plate holderhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/lie-nielsendowelplate-howto-woodworksbyjohn-lasvegaswoodworker-4.jpgLie-NielsenDowelPlate-Howto-WoodworksbyJohn-LasVegasWoodworker-4Hammer through 3/16" hole, use thumb to support ithttps://woodworksbyjohn.com/wp-content/uploads/2014/11/lie-nielsendowelplate-howto-woodworksbyjohn-lasvegaswoodworker-3.jpgLie-NielsenDowelPlate-Howto-WoodworksbyJohn-LasVegasWoodworker-3Sharpen end of piecehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/lie-nielsendowelplate-howto-woodworksbyjohn-lasvegaswoodworker-2.jpgLie-NielsenDowelPlate-Howto-WoodworksbyJohn-LasVegasWoodworker-2After doing both sides, lay piece flat and cut NOTE: piece will fly out behind you!https://woodworksbyjohn.com/wp-content/uploads/2014/11/lie-nielsendowelplate-howto-woodworksbyjohn-lasvegaswoodworker-1.jpgLie-NielsenDowelPlate-Howto-WoodworksbyJohn-LasVegasWoodworker-1Fence set 3/16"+, blade height the same. Run short piece (4"-5") as shownhttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-tailsaroundthecorner-woodworksbyjohn-5.jpgEtsyCustomOrder-TailsAroundtheCorner-WoodworksbyJohn-5Paring to the linehttps://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-tailsaroundthecorner-woodworksbyjohn-4.jpgEtsyCustomOrder-TailsAroundtheCorner-WoodworksbyJohn-4https://woodworksbyjohn.com/wp-content/uploads/2014/11/etsycustomorder-tailsaroundthecorner-woodworksbyjohn-3.jpgEtsyCustomOrder-TailsAroundtheCorner-WoodworksbyJohn-3Parts laid out2014-11-09T19:14:09+00:00monthlyhttps://woodworksbyjohn.com/2014/10/20/garage-side-door-unorthodox-methods-but-done/https://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-planingbevel-customdoor.jpgSideDoor-VegasDutch-PlaningBevel-CustomDoorBeveling the Strike Edgehttps://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-outsideopen-customdoor.jpgSideDoor-VegasDutch-OutsideOpen-CustomDoorOutside view -- openhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-outsideclosed-customdoor.jpgSideDoor-VegasDutch-OutsideClosed-CustomDoorOutside view -- closedhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-layingoutbevel-customdoor.jpgSideDoor-VegasDutch-LayingOutBevel-CustomDoorLaying out bevelhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-insideopen-customdoor.jpgSideDoor-VegasDutch-InsideOpen-CustomDoorInside view -- openhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-insideclosed-customdoor.jpgSideDoor-VegasDutch-InsideClosed-CustomDoorInside view -- closedhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/sidedoor-vegasdutch-fittingspeakeasy-customdoor.jpgSideDoor-VegasDutch-FittingSpeakEasy-CustomDoorSpeak Easy adjustmentshttps://woodworksbyjohn.com/wp-content/uploads/2014/10/olddoor.jpgOldDoorOut with the Old2014-10-20T18:41:09+00:00monthlyhttps://woodworksbyjohn.com/2014/10/13/an-unorthodox-way-to-hang-a-door/https://woodworksbyjohn.com/wp-content/uploads/2014/10/crappyshot.jpgCrappyshothttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-assemblyprocess-woodworksbyjohn-1.jpgGarageSideDoor-AssemblyProcess-WoodworksbyJohn-1Assembled and Clampedhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-panels-woodworksbyjohn-surfacedwithplanes.jpgGarageDoor-Panels-WoodworksbyJohn-SurfacedwithplanesPlease --- no Paint!!https://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-mortisetenon-woodworksbyjohn-clamped.jpgGarageDoor-Mortise&Tenon-WoodworksbyJohn-ClampedGlued and Clampedhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-panels-woodworksbyjohn-raisedpaneldetail.jpgGarageDoor-Panels-WoodworksbyJohn-RaisedPanelDetailChamfered Edge on Panelhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-hingetemplate-woodworksbyjohn-3.jpgGarageDoor-HingeTemplate-WoodworksbyJohn-3Adjusting the backsethttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-hingetemplate-woodworksbyjohn-2.jpgGarageDoor-HingeTemplate-WoodworksbyJohn-2All mortises cuthttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-doorlockset-woodworksbyjohn.jpgGarageDoor-DoorLockset-WoodworksbyJohn-Lockset hole and mortisehttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagedoor-hingetemplate-woodworksbyjohn-1.jpgGarageDoor-HingeTemplate-WoodworksbyJohn-1Hinge mortise jig test in scrap wood2014-10-14T00:33:48+00:00monthlyhttps://woodworksbyjohn.com/2014/10/11/garage-side-door-past-due-project/https://woodworksbyjohn.com/wp-content/uploads/2014/10/stanley-71-small-router-plane.jpgStanley #71 small router planeStanley #271 small router plane to set haunch depthhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor.jpgGarageSideDoorhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-13.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-13Success, one down and seven to go!https://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-11.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-11Twin Tenonshttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-9.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-9Penciling in haunch depth with glass tilehttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-10.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-10Removing waste between twin tenonshttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-8.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-8https://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-7.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-7Checking calculations -- 31 3/4" as neededhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-5.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-5https://woodworksbyjohn.com/wp-content/uploads/2014/10/garagesidedoor-preparingstock-woodworksbyjohn-6.jpgGarageSideDoor-PreparingStock-WoodworksbyJohn-6Cutting tenons on tablesaw2014-10-11T22:07:32+00:00monthlyhttps://woodworksbyjohn.com/2014/10/08/updating-the-bathroom/https://woodworksbyjohn.com/wp-content/uploads/2014/10/image-1.jpgImage 1https://woodworksbyjohn.com/wp-content/uploads/2014/10/bathroom-shelf.jpgBathroom Shelfhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/pano-wlight-off.jpgBathroom CabinetsWalnut Bathroomhttps://woodworksbyjohn.com/wp-content/uploads/2014/10/old-tile.jpgold tilehttps://woodworksbyjohn.com/wp-content/uploads/2014/10/backsplash-closeup.jpgbacksplash closeup2014-10-09T15:11:39+00:00monthlyhttps://woodworksbyjohn.com/2014/09/30/dining-chair-with-seagrass/https://woodworksbyjohn.com/wp-content/uploads/2014/09/image-2.jpgImage 2Clamped to torsion boxes and warp is started. That's called a "Heddle" with the grass wrapped around it. https://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-frame-weave-3.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Frame-weave-3Pattern laid out with sticks, weaving begins.https://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-frame-weave-1.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Frame-weave-1Corner Blockshttps://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-frame-weave-2.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Frame-weave-2Goal is to hit the center point at the front and back rail at the same time.https://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-frame-lapjoint-2.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Frame-Lapjoint-2Leveling with Router Planehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-complete-2.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Complete-2https://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-frame-lapjoint-1.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Frame-Lapjoint-1Cutting Lap Joints with Ripsawhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/hongkongseagrass-woodworksbyjohn-prototypechair-complete-1.jpgHongKongSeagrass-WoodworksbyJohn-PrototypeChair-Complete-1Prototype with new seat2014-09-30T15:34:20+00:00monthlyhttps://woodworksbyjohn.com/2014/09/21/of-beading-tools-and-scratch-stocks/https://woodworksbyjohn.com/wp-content/uploads/2014/09/musicianswallart-woodworksbyjohn-gildedtrebleclef-4.jpgMusiciansWallArt-WoodworksbyJohn-GildedTrebleClef-4https://woodworksbyjohn.com/wp-content/uploads/2014/09/musicianswallart-woodworksbyjohn-gildedtrebleclef-1.jpgMusiciansWallArt-WoodworksbyJohn-GildedTrebleClef-1https://woodworksbyjohn.com/wp-content/uploads/2014/09/custompictureframe-walnut-handbeaded-woodworksbyjohn-lasvegas-4.jpgCustomPictureFrame-Walnut-HandBeaded-WoodworksbyJohn-LasVegas-4https://woodworksbyjohn.com/wp-content/uploads/2014/09/custompictureframe-walnut-handbeaded-woodworksbyjohn-lasvegas-3.jpgCustomPictureFrame-Walnut-HandBeaded-WoodworksbyJohn-LasVegas-3https://woodworksbyjohn.com/wp-content/uploads/2014/09/custompictureframe-walnut-handbeaded-woodworksbyjohn-lasvegas-2.jpgCustomPictureFrame-Walnut-HandBeaded-WoodworksbyJohn-LasVegas-2Nice cuts on Walnuthttps://woodworksbyjohn.com/wp-content/uploads/2014/09/custompictureframe-walnut-handbeaded-woodworksbyjohn-lasvegas-1.jpgCustomPictureFrame-Walnut-HandBeaded-WoodworksbyJohn-LasVegas-1Adjusting Fence2014-09-22T13:34:59+00:00monthlyhttps://woodworksbyjohn.com/2014/09/18/the-real-reward/https://woodworksbyjohn.com/wp-content/uploads/2014/09/trebleclefbox-etsy-africanokoume-woodworksbyjohn-4.jpgTrebleClefBox-Etsy-AfricanOkoume-WoodworksbyJohn-4https://woodworksbyjohn.com/wp-content/uploads/2014/09/trebleclefbox-etsy-africanokoume-woodworksbyjohn-3.jpgTrebleClefBox-Etsy-AfricanOkoume-WoodworksbyJohn-3Treble Clef Box: African Okoume with Gilded, Copper LId2014-09-18T17:47:29+00:00monthlyhttps://woodworksbyjohn.com/2014/09/15/treble-clef-box-update/https://woodworksbyjohn.com/wp-content/uploads/2014/09/antiquedtrebleclef-copper-gilded-woodworksbyjohn-lasvegas.jpgAntiquedTrebleClef-Copper-Gilded-WoodworksbyJohn-LasVegasPretty Boxes All in a Rowhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/antiquedtrebleclef-copper-gilded-woodworksbyjohn-lasvegas-4.jpgAntiquedTrebleClef-Copper-Gilded-WoodworksbyJohn-LasVegas-4https://woodworksbyjohn.com/wp-content/uploads/2014/09/antiquedtrebleclef-copper-gilded-woodworksbyjohn-lasvegas-3.jpgAntiquedTrebleClef-Copper-Gilded-WoodworksbyJohn-LasVegas-3https://woodworksbyjohn.com/wp-content/uploads/2014/09/antiquedtrebleclef-copper-gilded-woodworksbyjohn-lasvegas-2.jpgAntiquedTrebleClef-Copper-Gilded-WoodworksbyJohn-LasVegas-2https://woodworksbyjohn.com/wp-content/uploads/2014/09/antiquedtrebleclef-copper-gilded-woodworksbyjohn-lasvegas-1.jpgAntiquedTrebleClef-Copper-Gilded-WoodworksbyJohn-LasVegas-12014-09-15T14:44:34+00:00monthlyhttps://woodworksbyjohn.com/2014/09/11/treble-clef-box-lid/https://woodworksbyjohn.com/wp-content/uploads/2014/09/trebleclefbox-lidchamfering-blockplane-2.jpgTrebleClefBox-LidChamfering-BlockPlane-2Lines drawn in, beginning on end grainhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/trebleclefbox-lidchamfer-2.jpgTrebleClefBox-LidChamfer-2How the corner should look when donehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/trebleclefbox-lidchamfer-1.jpgTrebleClefBox-LidChamfer-1Check for correct angle after a few passeshttps://woodworksbyjohn.com/wp-content/uploads/2014/09/coppergildedtrebleclef.jpgCopperGildedTrebleClefhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/carvedtrebleclef-woodworksbyjohn-etsycustom-1.jpgCarvedTrebleClef-WoodworksbyJohn-EtsyCustom-12014-09-11T20:59:13+00:00monthlyhttps://woodworksbyjohn.com/2014/09/09/assembling-the-treble-clef-box/https://woodworksbyjohn.com/wp-content/uploads/2014/09/woodworksbyjohn-lasvegas-splinemiterjig-tablesaw.jpgWoodworksbyJohn-LasVegas-SplineMiterJig-TablesawTablesaw Jighttps://woodworksbyjohn.com/wp-content/uploads/2014/09/woodworksbyjohn-lasvegas-custometsybox-assembly-2.jpgWoodworksbyJohn-LasVegas-CustomEtsyBox-Assembly-2#2: Inside corner protectedhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/woodworksbyjohn-lasvegas-custometsybox-assembly-3.jpgWoodworksbyJohn-LasVegas-CustomEtsyBox-Assembly-3#3: Clamped and left to dryhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/woodworksbyjohn-lasvegas-custometsybox-assembly-1.jpgWoodworksbyJohn-LasVegas-CustomEtsyBox-Assembly-1#1: Tape appliedhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/shootingboard-woodworksbyjohn-lasvegas-customfurniture-5.jpgShootingBoard-WoodworksbyJohn-LasVegas-CustomFurniture-5Resulting "dust" from end grain cuthttps://woodworksbyjohn.com/wp-content/uploads/2014/09/shootingboard-woodworksbyjohn-lasvegas-customfurniture-4.jpgShootingBoard-WoodworksbyJohn-LasVegas-CustomFurniture-4Sandpaper and tight grip keeps it in placehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/shootingboard-woodworksbyjohn-lasvegas-customfurniture-2.jpgShootingBoard-WoodworksbyJohn-LasVegas-CustomFurniture-245 Degree block clamped to fencehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/shootingboard-woodworksbyjohn-lasvegas-customfurniture-1.jpgShootingBoard-WoodworksbyJohn-LasVegas-CustomFurniture-1Shooting Boardhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/etsycustomorder-remotecontrolbox-lid-trebleclef-2.jpgEtsyCustomOrder-RemoteControlBox-Lid-TrebleClef-2Initial outline with chip knifehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/etsycustomorder-remotecontrolbox-lid-trebleclef-3.jpgEtsyCustomOrder-RemoteControlBox-Lid-TrebleClef-3Grounding down the background2014-09-10T00:09:13+00:00monthlyhttps://woodworksbyjohn.com/2014/09/05/etsy-custom-order-treble-clef-box/https://woodworksbyjohn.com/wp-content/uploads/2014/09/tablesaw-miter-sequence-woodworksbyjohn-4.jpgTablesaw Miter Sequence-WoodworksbyJohn-4Box Parts Galore!https://woodworksbyjohn.com/wp-content/uploads/2014/09/tablesaw-miter-sequence-woodworksbyjohn-3.jpgTablesaw Miter Sequence-WoodworksbyJohn-3Short side cut with spacerhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/tablesaw-miter-sequence-woodworksbyjohn-2.jpgTablesaw Miter Sequence-WoodworksbyJohn-2Trimming miter endhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/tablesaw-miter-sequence-woodworksbyjohn-1.jpgTablesaw Miter Sequence-WoodworksbyJohn-1First cut to lengthhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/screen-shot-2014-09-03-at-7-24-01-am.pngScreen Shot 2014-09-03 at 7.24.01 AMhttps://woodworksbyjohn.com/wp-content/uploads/2014/09/custometsybox-trebleclef-woodworksbyjohn-mitersled.jpgCustomEtsyBox-TrebleClef-WoodworksbyJohn-MiterSled-Table Saw Miter Jighttps://woodworksbyjohn.com/wp-content/uploads/2014/09/custometsybox-trebleclef-woodworksbyjohn-miters-1.jpgCustomEtsyBox-TrebleClef-WoodworksbyJohn-Miters-1Measuring First Piecehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/custometsybox-trebleclef-woodworksbyjohn-boxes.jpgCustomEtsyBox-TrebleClef-WoodworksbyJohn-BoxesPlethora of Boxes to Be!https://woodworksbyjohn.com/wp-content/uploads/2014/09/custometsybox-trebleclef-woodworksbyjohn-2.jpgCustomEtsyBox-TrebleClef-WoodworksbyJohn-2Book matched, ready to planehttps://woodworksbyjohn.com/wp-content/uploads/2014/09/custometsybox-trebleclef-woodworksbyjohn-1.jpgCustomEtsyBox-TrebleClef-WoodworksbyJohn-1Re-sawing the Okoume2014-09-05T21:26:19+00:00monthlyhttps://woodworksbyjohn.com/2014/08/23/custom-picture-frame-molding-part-2-finished/https://woodworksbyjohn.com/wp-content/uploads/2014/08/walnutpictureframe-custommolding-lasvegaswoodworker-3.jpgWalnutPictureFrame-CustomMolding-LasVegasWoodworker-3Gimlet to pre-drill for screwshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/walnutpictureframe-custommolding-lasvegaswoodworker-2.jpgWalnutPictureFrame-CustomMolding-LasVegasWoodworker-2Finished & Ready for Paintinghttps://woodworksbyjohn.com/wp-content/uploads/2014/08/walnutpictureframe-custommolding-lasvegaswoodworker-1.jpgWalnutPictureFrame-CustomMolding-LasVegasWoodworker-1https://woodworksbyjohn.com/wp-content/uploads/2014/08/nunsatthefountain-dianeeugster-enhanced.jpgNunsattheFountain-DianeEugster-enhancedNuns at the Fountain by Diane Eugsterhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-profile1.jpgCustomPictureFrameMolding-ProfileGained 3/8+" of depthhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-final-sanding-tadpolesander1.jpgCustomPictureFrameMolding-Final Sanding-TadpoleSanderTadpole Sanderhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-final-sanding-chalkboard-eraser1.jpgCustomPictureFrameMolding-Final Sanding-Chalkboard Eraserhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-clamping-assembly1.jpgCustomPictureFrameMolding-Clamping-AssemblyClamped Up2014-08-25T14:20:38+00:00monthlyhttps://woodworksbyjohn.com/2014/08/20/custom-picture-frame-molding-part-1/https://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-7.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-7Beaded, Coved, and ready for Final Workhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-6.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-6Setting up for the cove cuthttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-5.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-5https://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-4.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-4Picture #3https://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-3.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-3Picture #2https://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-2.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-2Picture #1https://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-pictureframemolding-walnut-tutorial-woodworksbyjohn-1.jpgLasVegas-CustomWoodworker-PictureFrameMolding-Walnut-Tutorial-WoodworksbyJohn-1First step, routed bead on both outer edgeshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-profile.jpgCustomPictureFrameMolding-Profilehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-final-sanding-tadpolesander.jpgCustomPictureFrameMolding-Final Sanding-TadpoleSanderhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/custompictureframemolding-final-sanding-chalkboard-eraser.jpgCustomPictureFrameMolding-Final Sanding-Chalkboard Eraser2014-08-20T23:33:02+00:00monthlyhttps://woodworksbyjohn.com/2014/08/12/fig-leaf-frame-complete-gold-leaf-tutorial/https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-12.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-12Final burnishing after all is coveredhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-11.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-11Ready for the next leafhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-10.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-10Almost therehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-9.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-9Slowly pull leaf layer back, continue laying leaf in curveshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-8.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-8Gently press onto frame, side to sidehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-7.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-7Anchor on sight edge of framehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-6.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-6Begin at corners (hardest part)https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-5.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-5Pipe & plastic "tent" to ward off dusthttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-3.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-3Frame with slow set sizehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-dutchgold-metalleafgilding-tutorial-2.jpgWoodworksbyJohn-DutchGold-Metalleafgilding-tutorial-2Burnished with 4/0 wool2014-08-13T23:40:30+00:00monthlyhttps://woodworksbyjohn.com/2014/08/09/fig-leaf-frame/https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleafpictureframe-oneleg.jpgWoodworksbyJohn-LasVegas-FigLeafPictureFrame-onelegOne leg, ready for burnisher/sealerhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleafpictureframe-eraser-sandingblock.jpgWoodworksbyJohn-LasVegas-FigLeafPictureFrame-Eraser-SandingBlockFinal sanding, my favorite sanding block!https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleaf-pictureframecarve-6.jpgWoodworksbyJohn-LasVegas-FigLeaf-PictureFrameCarve-6Drawing line to work to with chiselshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleaf-pictureframecarve-4.jpgWoodworksbyJohn-LasVegas-FigLeaf-PictureFrameCarve-4Removing outer edge of framehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleaf-pictureframecarve-3.jpgWoodworksbyJohn-LasVegas-FigLeaf-PictureFrameCarve-3https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleaf-pictureframecarve-2.jpgWoodworksbyJohn-LasVegas-FigLeaf-PictureFrameCarve-2Same process with smaller #3https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegas-figleaf-pictureframecarve-11.jpgWoodworksbyJohn-LasVegas-FigLeaf-PictureFrameCarve-1Using a 3/20 to outline design2014-08-09T18:40:23+00:00monthlyhttps://woodworksbyjohn.com/2014/08/06/selig-chairs-my-learning-adventure/https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-straps.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-strapsPackage from USPS with 27 strapshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-ottoman.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-OttomanOttoman https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-joinerydetail-2.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-Joinerydetail-2Keyhole slot bracket, rear stretcherhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-joinerydetail-1.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-JoineryDetail-1Rear stretcher, single screwhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-frontrail.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-frontrailClose-up, note the two round head screwshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-frontrail-1.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-FrontRail-1Front Apron of Reclinerhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-done.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-DoneRefurbished, Re-Strapped, & Ready to be Returnedhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-refurbishing-1.jpgWoodworksbyJohn-FagasStraps-SeligChairs-Refurbishing-1Authentic, made in Denmarkhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-fagasstraps-seligchairs-reclinermechanism.jpgWoodworksbyJohn-FagasStraps-SeligChairs-ReclinerMechanismReclining Mechanism2014-11-20T15:11:54+00:00monthlyhttps://woodworksbyjohn.com/2014/08/06/beer-boot-serverpaddle-done/https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-lasvegaswoodworker-beerboot-servingpaddle.jpgWoodworksbyJohn-LasVegasWoodworker-BeerBoot-servingpaddle2014-08-06T14:12:42+00:00monthlyhttps://woodworksbyjohn.com/2014/08/03/refurbishing-danish-modern-selig-chairs-ottoman/https://woodworksbyjohn.com/wp-content/uploads/2014/08/seligchair-marker.jpgSeligChair-markerScar after touch up and waxhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/seligchair-leg.jpgSeligChair-LegLeg vacuum cleaner scarhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/seligchair-blended.jpgSeligChair-blendedBack completed, some wear here.https://woodworksbyjohn.com/wp-content/uploads/2014/08/seligchair-arm-raw.jpgSeligChair-Arm-RawFront of arm, typical wearhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/seligchair-1.jpgSeligChair-1Cleaning the bracket slothttps://woodworksbyjohn.com/wp-content/uploads/2014/08/screen-shot-2014-08-03-at-11-59-14-am.pngScreen Shot 2014-08-03 at 11.59.14 AMDanish Modern Selig Chair2020-10-22T20:15:29+00:00monthlyhttps://woodworksbyjohn.com/2014/08/01/production-mode-its-all-about-the-process/https://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-beerbootserver-4.jpgWoodworksbyJohn-BeerBootServer-4Blank flipped around and end routedhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-beerbootserver-3.jpgWoodworksbyJohn-BeerBootServer-3Blank clamped to template, handle routedhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-beerbootserver-2.jpgWoodworksbyJohn-BeerBootServer-2After drawing design, cut close to line on bandsawhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/woodworksbyjohn-beerbootserver-1.jpgWoodworksbyJohn-BeerBootServer-1Ready for final sanding and finishhttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-woodworksbyjohn-beerboot-server-templates.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-BeerBoot-Server-templatesTemplates for Boot and paddle endshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-woodworksbyjohn-beerboot-server-templates-5.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-BeerBoot-Server-templates-5Completed paddlehttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-woodworksbyjohn-beerboot-server-templates-4.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-BeerBoot-Server-templates-4Routed in three passeshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-woodworksbyjohn-beerboot-server-templates-3.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-BeerBoot-Server-templates-3Drill press work with modified forstner bithttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-woodworksbyjohn-beerboot-server-templates-2.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-BeerBoot-Server-templates-2Transferring cut-out, located by center lineshttps://woodworksbyjohn.com/wp-content/uploads/2014/08/lasvegas-customwoodworker-woodworksbyjohn-beerboot-server-templates-1.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-BeerBoot-Server-templates-1Locating cut-outs2014-08-01T22:41:07+00:00monthlyhttps://woodworksbyjohn.com/2014/07/30/busy-feels-good/https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-72.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-7Vertical leg is back side of leafhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-81.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-8Corner sample toned with Asphaltum https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-61.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-6Laying the leafhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/lasvegas-customwoodworker-woodworksbyjohn-figleaf-frame.jpgLasVegas-CustomWoodworker-WoodworksbyJohn-FigLeaf-FrameFrame with trial corner sample2014-07-31T04:14:26+00:00monthlyhttps://woodworksbyjohn.com/2014/07/28/two-very-interesting-projects-dianes-picture-frame/https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-seligchairs-2.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-SeligChairs-2Recliner Mechanismhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-seligchairs-1.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-SeligChairs-1Selig chairs at my homehttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-5.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-5Checking for proper tackhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-4.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-4https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-3.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-3https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-2.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-2https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-pictureframe-1.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-PictureFrame-1https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-beerboots-5.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-Beerboots-5Template is placed on board and routed out.https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-beerboots-4.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-Beerboots-4Bulk of the waste is removed with a modified forstner bit.https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-lasvegas-customwoodworker-beerboots-3.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-Beerboots-3The template is filed/sanded until the boot fits.2014-07-28T14:31:10+00:00monthlyhttps://woodworksbyjohn.com/2014/07/20/carving-italy-picture-frames/https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-figleafcarving-pictureframe-basswood-pattern.jpgWoodworksbyJohn-FigLeafCarving-PictureFrame-Basswood-PatternFig Leaf Templatehttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-figleafcarving-pictureframe-basswood-4.jpgWoodworksbyJohn-FigLeafCarving-PictureFrame-Basswood-4Burnisher/Sealer polished with 4/0 steel woolhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-figleafcarving-pictureframe-basswood-3.jpgWoodworksbyJohn-FigLeafCarving-PictureFrame-Basswood-3Frame sealed with one coat of burnisher/sealerhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-figleafcarving-pictureframe-basswood-2.jpgWoodworksbyJohn-FigLeafCarving-PictureFrame-Basswood-2Burnisher/Sealer -- note how thick it is due to a high clay content.https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-figleafcarving-pictureframe-basswood-1.jpgWoodworksbyJohn-FigLeafCarving-PictureFrame-Basswood-1Initial Carve on Samplehttps://woodworksbyjohn.com/wp-content/uploads/2014/07/romancarving.jpgRomanCarving2014-07-21T00:17:24+00:00monthlyhttps://woodworksbyjohn.com/2014/07/08/crib-to-bed-what-its-really-all-about/https://woodworksbyjohn.com/wp-content/uploads/2014/07/image1.jpgImage1I think this will work!!https://woodworksbyjohn.com/wp-content/uploads/2014/07/image-3.jpgImage 3Almost complete, needs glass tophttps://woodworksbyjohn.com/wp-content/uploads/2014/07/image-2.jpgImage 2Project beginnings, aka Cribhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/image-1.jpgImage 1Clients first reactionhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed-woodworksbyjohn-lasvegasfurnituremaker-final-3.jpgCribtoBed-WoodworksbyJohn-LasVegasFurnitureMaker-Final-3https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed-woodworksbyjohn-lasvegasfurnituremaker-final-2.jpgCribtoBed-WoodworksbyJohn-LasVegasFurnitureMaker-Final-2Gorilla Glue removed easilyhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed-woodworksbyjohn-lasvegasfurnituremaker-final-1.jpgCribtoBed-WoodworksbyJohn-LasVegasFurnitureMaker-Final-1Stock preparation2014-07-25T14:07:07+00:00monthlyhttps://woodworksbyjohn.com/2014/07/04/crib-to-desk-part-ii/https://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-jointtest-2.jpgWoodworksbyJohn-JointTest-2One good whack! Note wood was weaker than jointhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/woodworksbyjohn-jointtest-1.jpgWoodworksbyJohn-JointTest-1Clamped, dried, and ready to testhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-marking-3.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-Marking-3Twin tenons for front apronhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-7.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-7Refining shape after pattern routinghttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-6.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-6Pattern and tracing on apron, ready for bandsawhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-5.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-5https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-4.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-4https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-2.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-2Fine tuning tenonshttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtobed2-woodworksbyjohn-lasvegas-furnituremaker-1.jpgCribtoBed2-WoodworksbyJohn-LasVegas-FurnitureMaker-1Success! measurements were correct -- crib side fits2014-07-04T14:24:23+00:00monthlyhttps://woodworksbyjohn.com/2014/07/02/the-challenge-crib-to-desk/https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-woodworksbyjohn-uniqueproject-51.jpgCribtoDesk-WoodworksbyJohn-UniqueProject-5https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-woodworksbyjohn-uniqueproject-41.jpgCribtoDesk-WoodworksbyJohn-UniqueProject-4https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-customwoodworkproject-woodworksbyjohn-furniturebuilder-lasvegas-61.jpgCribtoDesk-CustomWoodworkProject-WoodworksbyJohn-FurnitureBuilder-LasVegas-6https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-customwoodworkproject-woodworksbyjohn-furniturebuilder-lasvegas-41.jpgCribtoDesk-CustomWoodworkProject-WoodworksbyJohn-FurnitureBuilder-LasVegas-4Checking fit as I gohttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-customwoodworkproject-woodworksbyjohn-furniturebuilder-lasvegas-31.jpgCribtoDesk-CustomWoodworkProject-WoodworksbyJohn-FurnitureBuilder-LasVegas-3Rounding over tenon to match factory mortisehttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-customwoodworkproject-woodworksbyjohn-furniturebuilder-lasvegas-21.jpgCribtoDesk-CustomWoodworkProject-WoodworksbyJohn-FurnitureBuilder-LasVegas-2Cutting shoulder of tenon: dado and stop blockhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-woodworksbyjohn-uniqueproject-8.jpgCribtoDesk-WoodworksbyJohn-UniqueProject-8Jig in use on bottom of one sidehttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-woodworksbyjohn-uniqueproject-7.jpgCribtoDesk-WoodworksbyJohn-UniqueProject-7Jig with one of many test joints.https://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-woodworksbyjohn-uniqueproject-5.jpgCribtoDesk-WoodworksbyJohn-UniqueProject-5Repairing a loose jointhttps://woodworksbyjohn.com/wp-content/uploads/2014/07/cribtodesk-woodworksbyjohn-uniqueproject-4.jpgCribtoDesk-WoodworksbyJohn-UniqueProject-4Carefully prying out bottom of slats2014-07-02T14:07:57+00:00monthlyhttps://woodworksbyjohn.com/2014/06/28/tapping-into-my-artistic-side/https://woodworksbyjohn.com/wp-content/uploads/2014/06/artisticwoodcarve-woodworksbyjohn-beginnings.jpgArtisticWoodCarve-WoodworksbyJohn-Beginningshttps://woodworksbyjohn.com/wp-content/uploads/2014/06/ruinedshirt-carvedcloth-woodworksbyjohn-artistic-4.jpgRuinedShirt-CarvedCloth-WoodworksbyJohn-Artistic-4https://woodworksbyjohn.com/wp-content/uploads/2014/06/ruinedshirt-carvedcloth-woodworksbyjohn-artistic-3.jpgRuinedShirt-CarvedCloth-WoodworksbyJohn-Artistic-3https://woodworksbyjohn.com/wp-content/uploads/2014/06/ruinedshirt-carvedcloth-woodworksbyjohn-artistic-2.jpgRuinedShirt-CarvedCloth-WoodworksbyJohn-Artistic-2https://woodworksbyjohn.com/wp-content/uploads/2014/06/ruinedshirt-carvedcloth-woodworksbyjohn-artistic-1.jpgRuinedShirt-CarvedCloth-WoodworksbyJohn-Artistic-1https://woodworksbyjohn.com/wp-content/uploads/2014/06/buttoncarve.jpgButtonCarveWho's got the button?2014-06-30T14:36:05+00:00monthlyhttps://woodworksbyjohn.com/2014/06/23/hand-tool-work-relaxation/https://woodworksbyjohn.com/wp-content/uploads/2014/06/front-in-stand.jpgfront in standFront Viewhttps://woodworksbyjohn.com/wp-content/uploads/2014/06/back.jpgbackBack Viewhttps://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-8a.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-8aFlattening out the bottomhttps://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-8.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-8Initial material removed at angle from edgehttps://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-7a.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-7aMove to bench top bench, easier on my old back!https://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-7.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-7Scribed line outlined with chisel https://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-6.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-6Starting to come together https://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-5a.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-5aInitial angled cut on shoulderhttps://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-5.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-5Opposite side and removal of wastehttps://woodworksbyjohn.com/wp-content/uploads/2014/06/handtool-woodwork-lasvegas-woodworksbyjohn-displaystand-4a.jpgHandtool-woodwork-LasVegas-WoodworksbyJohn-DisplayStand-4aFinish on Longer Cheek 2014-06-23T14:51:31+00:00monthlyhttps://woodworksbyjohn.com/2014/06/17/since-the-wood-in-design-show/2014-06-18T03:36:53+00:00monthlyhttps://woodworksbyjohn.com/2014/06/05/miscellaneous-postpartum-blog/https://woodworksbyjohn.com/wp-content/uploads/2014/06/woodworksbyjohn-miscellaneousblog-5.jpgWoodworksbyJohn-MiscellaneousBlog-5Completed knifehttps://woodworksbyjohn.com/wp-content/uploads/2014/06/woodworksbyjohn-miscellaneousblog-4.jpgWoodworksbyJohn-MiscellaneousBlog-4Source of blade and cuts made on Basswoodhttps://woodworksbyjohn.com/wp-content/uploads/2014/06/woodworksbyjohn-miscellaneousblog-3.jpgWoodworksbyJohn-MiscellaneousBlog-3https://woodworksbyjohn.com/wp-content/uploads/2014/06/woodworksbyjohn-miscellaneousblog-2.jpgWoodworksbyJohn-MiscellaneousBlog-2https://woodworksbyjohn.com/wp-content/uploads/2014/06/woodworksbyjohn-miscellaneousblog-1.jpgWoodworksbyJohn-MiscellaneousBlog-12014-06-06T02:18:25+00:00monthlyhttps://woodworksbyjohn.com/2014/05/23/integral-dust-check/https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-customfurniture-lasvegas-integraldustcheck-6.jpgWoodworksbyJohn-CustomFurniture-LasVegas-IntegralDustCheck-6https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-customfurniture-lasvegas-integraldustcheck-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-IntegralDustCheck-5Finished processhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-customfurniture-lasvegas-integraldustcheck-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-IntegralDustCheck-4Clamped to the max!https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-customfurniture-lasvegas-integraldustcheck-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-IntegralDustCheck-3Fitting the dust checkhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-customfurniture-lasvegas-integraldustcheck-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-IntegralDustCheck-2Cleaning up separation cuthttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-customfurniture-lasvegas-integraldustcheck-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-IntegralDustCheck-1Dado cut inside box, dust check material in foreground2014-05-23T14:45:55+00:00monthlyhttps://woodworksbyjohn.com/2014/05/21/lidded-plywood-box-project-in-progress/https://woodworksbyjohn.com/wp-content/uploads/2014/05/assembled.jpgAssembledhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-mitersquare-shopmade-2.jpgWoodworksbyJohn-MiterSquare-ShopMade-2Completed miter squarehttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-mitersquare-shopmade-1.jpgWoodworksbyJohn-MiterSquare-ShopMade-1Inspiration photo and partshttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-7.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-7Small carving chisel flattens out saw cut, note V in left side that is removed from the right side.https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-5.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-5Parts laid out as cut, then marked so box can be assembled with continuous grain.https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-6.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-6Blade lowered, stop block set to cut groove for spline.https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-4.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-4Piece is flipped over and re-mitered to keep same side out. Stop block is added to make up difference between long and short side.https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-3.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-3Short side cut, piece is flipped and re-cut. Stop block removed to cut opposite long side.https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-2.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-2After mitering one end, longest piece is marked. Stop block is clamped to the sledhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lasvegasfurnituremaker-splined-mitered-box-1.jpgWoodworksbyJohn-LasVegasFurnitureMaker-Splined-Mitered-Box-1Exact 45 degrees angle is crucial2014-05-21T14:39:59+00:00monthlyhttps://woodworksbyjohn.com/2014/05/18/juried-in/2014-05-19T13:54:08+00:00monthlyhttps://woodworksbyjohn.com/2014/05/13/why-i-like-old-brown-glue/https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-oldbrownglue-liquidhide-5.jpgWoodworksbyJohn-OldBrownGlue-LiquidHide-5CA glue rejected stain!https://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-oldbrownglue-liquidhide-4.jpgWoodworksbyJohn-OldBrownGlue-LiquidHide-4Stained with one coat of wipe on polyhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-oldbrownglue-liquidhide-3.jpgWoodworksbyJohn-OldBrownGlue-LiquidHide-3Drying the surfacehttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-oldbrownglue-liquidhide-2.jpgWoodworksbyJohn-OldBrownGlue-LiquidHide-2Scrubbing away the gluehttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-oldbrownglue-liquidhide-1.jpgWoodworksbyJohn-OldBrownGlue-LiquidHide-1OaK Ply box -- glued uphttps://woodworksbyjohn.com/wp-content/uploads/2014/05/screen-shot-2014-05-13-at-4-55-50-pm.pngScreen Shot 2014-05-13 at 4.55.50 PM2019-05-26T21:56:45+00:00monthlyhttps://woodworksbyjohn.com/2014/05/04/two-fingered-typist-blog/https://woodworksbyjohn.com/wp-content/uploads/2014/05/egg-to-man.jpgEgg to Manhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lite-2.jpgWoodworksbyJohn-Lite-2Very few shadowshttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-lite-1.jpgWoodworksbyJohn-Lite-1Lights Onhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-dark.jpgWoodworksbyJohn-DarkLights Offhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-boxmaker-lasvegas-stanley140trick.jpgWoodworksbyJohn-BoxMaker-LasVegas-Stanley140trickTenon Jig to do a faux Stanley 140 trickhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-boxmaker-lasvegas-3.jpgWoodworksbyJohn-BoxMaker-LasVegas-3Rough cut to shape prior to cutting tailshttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-boxmaker-lasvegas-2.jpgWoodworksbyJohn-BoxMaker-LasVegas-214 Degree tails laid outhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/woodworksbyjohn-boxmaker-lasvegas-1.jpgWoodworksbyJohn-BoxMaker-LasVegas-1Shooting board to square bottomhttps://woodworksbyjohn.com/wp-content/uploads/2014/05/dsc02638.jpgDSC026382014-05-05T17:14:02+00:00monthlyhttps://woodworksbyjohn.com/2014/04/27/in-the-house-diane-is-happy-me-too/https://woodworksbyjohn.com/wp-content/uploads/2014/04/hdtv-stand-woodworksbyjohn-2.jpgHDTV Stand-WoodworksbyJohn-2Access for Control Boxhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/hdtv-stand-woodworksbyjohn-1.jpgHDTV Stand-WoodworksbyJohn-1Woodworks by John: HDTV Stand2014-05-07T10:33:11+00:00monthlyhttps://woodworksbyjohn.com/2014/04/03/not-quite-easter-but-heres-my-egg/https://woodworksbyjohn.com/wp-content/uploads/2014/04/screen-shot-2014-04-03-at-8-43-40-pm.pngScreen Shot 2014-04-03 at 8.43.40 PMhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-9.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-9Circles drawn on end as guidehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-10.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-10https://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-8.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-8Bench hook to "hog out" woodhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-7.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-7Lower half completehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-6.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-6Also tried to hold with a bench hook.https://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-5.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-5Which means you're cutting towards your thumb and you could get cut!https://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-4.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-4One way to carve is to hold the knife as shown...https://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-3.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-3Randy showed a better way to "fulcrum" the knifehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/eggcarving-woodworksbyjohn-lasvegas-furnituremaker-2.jpgEggCarving-WoodworksbyJohn-LasVegas-FurnitureMaker-2Next, a circle was drawn to begin the carve.2014-04-26T16:32:03+00:00monthlyhttps://woodworksbyjohn.com/2014/04/20/so-close-i-can-almost-taste-it/https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-cutting-5.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-Cutting-5Final tapering with jack planehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-cutting-4.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-Cutting-4Beginnings with the block planehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-cutting-3.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-Cutting-3https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-cutting-2.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-Cutting-2Roughed out steps for 14 degree anglehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-cutting-1.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-Cutting-1Successive passes with fence guided routerhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-7.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-7Removing saw marks with block plane on endshttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-6.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-6Cut to length with trim saw and guidehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-5.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-5Planing the working edgehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-4.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-4A work in progresshttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-14degree-sapele-cabinettop-3.jpgWoodworksbyJohn-14degree-Sapele-Cabinettop-3At times it was easier to pull the Jointer Plane!2014-04-21T01:58:22+00:00monthlyhttps://woodworksbyjohn.com/2014/04/14/psst-wanna-see-a-topless-cabinet/https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-topless-1.jpgWoodworksbyJohn-HDTVStand-Topless-1Topless HDTV Cabinethttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-topattachmentblocks-3.jpgWoodworksbyJohn-HDTVStand-TopAttachmentBlocks-3https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-topattachmentblocks-2-e1397485635208.jpgWoodworksbyJohn-HDTVStand-TopAttachmentBlocks-2Top Mounting Blockshttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-topattachmentblocks-1.jpgWoodworksbyJohn-HDTVStand-TopAttachmentBlocks-1Top Mounting Blockshttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-drawerpulls-birdseyemaple-2.jpgWoodworksbyJohn-HDTVStand-DrawerPulls-BirdseyeMaple-2https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-drawerpulls-birdseyemaple-1.jpgWoodworksbyJohn-HDTVStand-DrawerPulls-BirdseyeMaple-1https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-hdtvstand-dovetails-relationship-1.jpgWoodworksbyJohn-HDTVStand-Dovetails-relationship-12014-04-16T14:01:49+00:00monthlyhttps://woodworksbyjohn.com/2014/04/09/hardware-jewelry-for-the-cabinet/https://woodworksbyjohn.com/wp-content/uploads/2014/04/drawerpulls-woodworkbyjohn-birdseyemaple-shopmade-4.jpgDrawerPulls-WoodworkbyJohn-BirdseyeMaple-ShopMade-4Template for Pullshttps://woodworksbyjohn.com/wp-content/uploads/2014/04/drawerpulls-woodworkbyjohn-birdseyemaple-shopmade-5.jpgDrawerPulls-WoodworkbyJohn-BirdseyeMaple-ShopMade-5https://woodworksbyjohn.com/wp-content/uploads/2014/04/drawerpulls-woodworkbyjohn-birdseyemaple-shopmade-2.jpgDrawerPulls-WoodworkbyJohn-BirdseyeMaple-ShopMade-2Final fitting of Pullhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/drawerpulls-woodworkbyjohn-birdseyemaple-shopmade-1.jpgDrawerPulls-WoodworkbyJohn-BirdseyeMaple-ShopMade-1Four pulls, One coat of Shellachttps://woodworksbyjohn.com/wp-content/uploads/2014/04/drawerpulls-woodworkbyjohn-birdseyemaple-shopmade-0.jpgDrawerPulls-WoodworkbyJohn-BirdseyeMaple-ShopMade-0Dovetail inspired, Birdseye Maple Drawer Pulls2014-04-10T03:11:43+00:00monthlyhttps://woodworksbyjohn.com/2014/04/06/fitting-drawers-and-such/https://woodworksbyjohn.com/wp-content/uploads/2014/04/fittingdrawers-woodworksbyjohn-furniturebuilder-4.jpgFittingDrawers-WoodworksbyJohn-FurnitureBuilder-4Drawer fitting completehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/fittingdrawers-woodworksbyjohn-furniturebuilder-3.jpgFittingDrawers-WoodworksbyJohn-FurnitureBuilder-3Installing drawer stophttps://woodworksbyjohn.com/wp-content/uploads/2014/04/fittingdrawers-woodworksbyjohn-furniturebuilder-2.jpgFittingDrawers-WoodworksbyJohn-FurnitureBuilder-2Smoothing out the drawer webhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/fittingdrawers-woodworksbyjohn-furniturebuilder-1.jpgFittingDrawers-WoodworksbyJohn-FurnitureBuilder-1Aligning drawer guidehttps://woodworksbyjohn.com/wp-content/uploads/2014/04/dovetaileddrawerassembly-woodworksbyjohn-furniturebuilder-4.jpgDovetailedDrawerAssembly-WoodworksbyJohn-FurnitureBuilder-4Fine tuning drawer fit and revealhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/dovetaileddrawerassembly-woodworksbyjohn-furniturebuilder-3.jpgDovetailedDrawerAssembly-WoodworksbyJohn-FurnitureBuilder-3Trimming joint flushhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/dovetaileddrawerassembly-woodworksbyjohn-furniturebuilder-2.jpgDovetailedDrawerAssembly-WoodworksbyJohn-FurnitureBuilder-2Fully assembled, half blind dovetails in front and sliding dovetail for backhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/dovetaileddrawerassembly-woodworksbyjohn-furniturebuilder-1.jpgDovetailedDrawerAssembly-WoodworksbyJohn-FurnitureBuilder-1Caul used at dovetails to maintain pressure on bowed sides!2014-04-08T00:32:55+00:00monthlyhttps://woodworksbyjohn.com/2014/04/01/lesson-learned-drawer-woes/https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-lessonlearned-dovetaileddrawers-2.jpgWoodworksbyJohn-LessonLearned-DovetailedDrawers-2RR = right side of right drawerhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-lessonlearned-dovetaileddrawers-1.jpgWoodworksbyJohn-LessonLearned-DovetailedDrawers-1https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-drawerbottoms-2.jpgWoodworksbyJohn-DrawerBottoms-2Glued & clampedhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-drawerbottoms-1.jpgWoodworksbyJohn-DrawerBottoms-1Resawing Alder https://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-dovetaileddrawers-bottom-3.jpgWoodworksbyJohn-DovetailedDrawers-Bottom-3Surfacing with my bronze smootherhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-dovetaileddrawers-bottom-2.jpgWoodworksbyJohn-DovetailedDrawers-Bottom-2Ready to run through the planerhttps://woodworksbyjohn.com/wp-content/uploads/2014/04/woodworksbyjohn-dovetaileddrawers-bottom-1.jpgWoodworksbyJohn-DovetailedDrawers-Bottom-1Cleaning off glue with Stanley#802014-04-02T03:41:19+00:00monthlyhttps://woodworksbyjohn.com/2014/03/28/half-blind-dovetails-in-sapele-the-challenge-continues/https://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-lasvegas-furniture-halfblinddovetails-tail-layout-7.jpgWoodworksbyJohn-lasVegas-furniture-halfblinddovetails-Tail layout-7Ready to cut the tailshttps://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-lasvegas-furniture-halfblinddovetails-tail-layout-6.jpgWoodworksbyJohn-lasVegas-furniture-halfblinddovetails-Tail layout-6https://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-dovetailtrick.jpgWoodworksbyJohn-DovetailTrickSetting marking gauge with 1/4" polyethylene https://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-dovetailtrick-applied.jpgWoodworksbyJohn-DovetailTrick-AppliedUsing polyethylene to guide chiselhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/sapele-crazygrain-difficultdovetail-1.jpgSapele-CrazyGrain-DifficultDovetail-1Does not cut Cleanly2014-03-28T15:00:23+00:00monthlyhttps://woodworksbyjohn.com/2014/03/25/sapele-half-blind-dovetails-sharpening-time/https://woodworksbyjohn.com/wp-content/uploads/2014/03/sharpening.jpgsharpeninghttps://woodworksbyjohn.com/wp-content/uploads/2014/03/sapele-dovetails.jpgSapele DovetailsSapele D/Thttps://woodworksbyjohn.com/wp-content/uploads/2014/03/boxes.jpgBoxes2014-03-26T16:00:37+00:00monthlyhttps://woodworksbyjohn.com/2014/03/17/back-to-work-dont-get-the-pull-before-the-drawer/https://woodworksbyjohn.com/wp-content/uploads/2014/03/slidingdoors-bigleafmaple-woodworksbyjohn-installed.jpgSlidingDoors-BigLeafMaple-WoodworksbyJohn-installedDoors installed in cabinethttps://woodworksbyjohn.com/wp-content/uploads/2014/03/slidingdoors-bigleafmaple-woodworksbyjohn-3.jpgSlidingDoors-BigLeafMaple-WoodworksbyJohn-3Fine tuning tablesaw cut rabbet and testing the fithttps://woodworksbyjohn.com/wp-content/uploads/2014/03/slidingdoors-bigleafmaple-woodworksbyjohn-2.jpgSlidingDoors-BigLeafMaple-WoodworksbyJohn-2Penciling in rabbetshttps://woodworksbyjohn.com/wp-content/uploads/2014/03/slidingdoors-bigleafmaple-woodworksbyjohn-1.jpgSlidingDoors-BigLeafMaple-WoodworksbyJohn-1Working the doors with smooth planehttps://woodworksbyjohn.com/wp-content/uploads/2014/03/panelframeback-bigleafmaple-woodworksbyjohn.jpgPanel&Frameback-BigLeafMaple-WoodworksbyJohn-Rabbeted back for cabinethttps://woodworksbyjohn.com/wp-content/uploads/2014/03/finishing-bigleafmaple-woodworksbyjohn.jpgFinishing-BigLeafMaple-WoodworksbyJohn-Finishing Room?https://woodworksbyjohn.com/wp-content/uploads/2014/03/cardboard-drawers.jpgCardboard Drawers2014-03-17T15:16:00+00:00monthlyhttps://woodworksbyjohn.com/2014/03/13/whoops-got-ahead-of-myself/https://woodworksbyjohn.com/wp-content/uploads/2014/03/drawerpull-bigleafmaple-4grooved.jpgDrawerPull-BigLeafMaple-4groovedSecond design, now you can "get a grip"!https://woodworksbyjohn.com/wp-content/uploads/2014/03/drawerpull-bigleafmaple-4.jpgDrawerPull-BigLeafMaple-4First design, no finger groove but shellackedhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/drawerpull-bigleafmaple-3.jpgDrawerPull-BigLeafMaple-3https://woodworksbyjohn.com/wp-content/uploads/2014/03/drawerpull-bigleafmaple-2.jpgDrawerPull-BigLeafMaple-2https://woodworksbyjohn.com/wp-content/uploads/2014/03/drawerpull-bigleafmaple-1.jpgDrawerPull-BigLeafMaple-12014-03-14T13:49:13+00:00monthlyhttps://woodworksbyjohn.com/2014/03/08/cabinet-is-taking-shape/https://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-bottomrailshaped-assembly.jpgHDTV Cabinet-WoodworksbyJohn-bottomrailshaped-assemblyOne side, ready to be assembledhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-tenons-handwork.jpgHDTV Cabinet-WoodworksbyJohn-tenons-handworkSet up for finish work and final fittinghttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-tenons-base.jpgHDTV Cabinet-WoodworksbyJohn-Tenons-baseTenoning jig, notice sled with stop block used to cut shouldershttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-progresstodate.jpgHDTV Cabinet-WoodworksbyJohn-ProgresstodateAll but the top!https://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-mockup-actual.jpgHDTV Cabinet-WoodworksbyJohn-mockup-actualCabinet and full sized mock uphttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-finish2.jpgHDTV Cabinet-WoodworksbyJohn-finish2Finish with a flashhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-finish.jpgHDTV Cabinet-WoodworksbyJohn-finishFinish without a flashhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-bottomrailshaped-spokeshaves.jpgHDTV Cabinet-WoodworksbyJohn-bottomrailshaped-spokeshavesSpokeshaves to refine and smooth out cutshttps://woodworksbyjohn.com/wp-content/uploads/2014/03/hdtv-cabinet-woodworksbyjohn-bottomrailshaped-bandsaw.jpgHDTV Cabinet-WoodworksbyJohn-bottomrailshaped-bandsawTransferring pattern onto the green tape for visibility 2014-03-09T14:01:03+00:00monthlyhttps://woodworksbyjohn.com/2014/03/06/beginning-the-base-mitered-legs/https://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-miteredlegs-5.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-MiteredLegs-5Finished leg checks squarehttps://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-miteredlegs-4.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-MiteredLegs-4Three clamps, glued together, cure overnighthttps://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-miteredlegs-3.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-MiteredLegs-3Pieces prepared, spline ready to gohttps://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-miteredlegs-2.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-MiteredLegs-2Rabbeting the tops of each leghttps://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-miteredlegs-1.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-MiteredLegs-1Mitered piece to make 4 legshttps://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-hollowchiselmortiser-2.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-hollowchiselmortiser-2https://woodworksbyjohn.com/wp-content/uploads/2014/03/pedestal-base-customfurniture-woodworksbyjohn-hollowchiselmortiser-1.jpgPedestal Base-CustomFurniture-WoodworksbyJohn-hollowchiselmortiser-1Setting up hollow chisel mortiser2014-03-06T15:49:16+00:00monthlyhttps://woodworksbyjohn.com/2014/03/02/drawer-frames-webs-and-sliding-doors-oh-my/https://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-assembled1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-AssembledFirst glue up completed, shelf, bottom and top stretchers https://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-twindovetails-bottomrail.jpgWoodworksbyJohn-CustomFurniture-LasVegas-TwinDovetails-BottomRailTwin dovetails for bottom stretcher, groove is for drawer webhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-slidingdoors-profile.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlidingDoors-profileProfile of sliding door https://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-drawerweb-slidingdoors.jpgWoodworksbyJohn-CustomFurniture-LasVegas-DrawerWeb-slidingdoorsProof that it workshttps://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-drawerweb-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-DrawerWeb-4Attaching them squarely through bottom of drawer webhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-drawerweb-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-DrawerWeb-3Planing drawer guides to flat & squarehttps://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-drawerweb-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-DrawerWeb-2Web and dust panels in place, ready to glue back stretcherhttps://woodworksbyjohn.com/wp-content/uploads/2014/03/woodworksbyjohn-customfurniture-lasvegas-drawerweb-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-DrawerWeb-1Detail of back stretcher and side drawer web2014-05-11T21:23:55+00:00monthlyhttps://woodworksbyjohn.com/2014/02/27/dovetails-in-sapele-tough-fibrous-wood-for-sure/https://woodworksbyjohn.com/wp-content/uploads/2014/02/longgraincarcassdovetails-customfurniture-lasvegas.jpgLongGrainCarcassDovetails-CustomFurniture-LasVegashttps://woodworksbyjohn.com/wp-content/uploads/2014/02/longgraincarcassdovetails-customfurniture-lasvegas-penciled.jpgLongGrainCarcassDovetails-CustomFurniture-LasVegas-penciledMarked in with a sharpened pencilhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/dsc02423.jpgDSC02423Initial scribed lines with Kerf Cadet IIhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-tail2.jpgCarcassDovetails-Sapele-WoodworksbyJohn-tail2Checking all for square prior to transferring https://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-transfertail.jpgCarcassDovetails-Sapele-WoodworksbyJohn-transfertailTransferring tails to bottom stretcherhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-tail-1.jpgCarcassDovetails-Sapele-WoodworksbyJohn-tail-1Layout of 14 degree sideshttps://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-stanley271.jpgCarcassDovetails-Sapele-WoodworksbyJohn-Stanley271Unorthodox use of Stanley #271https://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-inprogress.jpgCarcassDovetails-Sapele-WoodworksbyJohn-inprogressWork in progresshttps://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-honing.jpgCarcassDovetails-Sapele-WoodworksbyJohn-honingHoning my chiselshttps://woodworksbyjohn.com/wp-content/uploads/2014/02/carcassdovetails-sapele-woodworksbyjohn-fibrous.jpgCarcassDovetails-Sapele-WoodworksbyJohn-fibrousEnhanced photo to show fibrous nature of this wood2014-03-01T14:24:10+00:00monthlyhttps://woodworksbyjohn.com/2014/02/25/a-tricky-half-blind-carcass-dovetail/https://woodworksbyjohn.com/wp-content/uploads/2014/02/14-degree.jpg14 degreePractice twin, 14 degree dovetail for bottom stretcherhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/topdovetails-cabinetcarcass-done.jpgTopDovetails-CabinetCarcass-DonePoor picture but joints are visiblehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/dovetailcarcass-woodworksbyjohn-customfurniture-lasvegas-6.jpgDovetailCarcass-WoodworksbyJohn-CustomFurniture-LasVegas-6https://woodworksbyjohn.com/wp-content/uploads/2014/02/dovetailcarcass-woodworksbyjohn-customfurniture-lasvegas-5.jpgDovetailCarcass-WoodworksbyJohn-CustomFurniture-LasVegas-5Resulting cuthttps://woodworksbyjohn.com/wp-content/uploads/2014/02/dovetailcarcass-woodworksbyjohn-customfurniture-lasvegas-4.jpgDovetailCarcass-WoodworksbyJohn-CustomFurniture-LasVegas-4Small chisel to remove waste by cutting end grainhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/dovetailcarcass-woodworksbyjohn-customfurniture-lasvegas-2.jpgDovetailCarcass-WoodworksbyJohn-CustomFurniture-LasVegas-2Trick from Tage Fridhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/dovetailcarcass-woodworksbyjohn-customfurniture-lasvegas-1.jpgDovetailCarcass-WoodworksbyJohn-CustomFurniture-LasVegas-12014-02-26T00:52:54+00:00monthlyhttps://woodworksbyjohn.com/2014/02/23/woods-cut-joinery-started-tv-stand-progress/https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-slidingdoortrack.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-SlidingDoorTrackSliding Door Trackhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-9.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-9L-Shaped Fence for tablesawhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-8.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-8Tenon jig used for second cut for rabbethttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-6.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-6Slight variation cleaned up with Stanley #71https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-7.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-7First cut for rabbet, note notched stop block to clear sawdusthttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-5.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-5Fence moved 1/4", cut with dovetail bithttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-3.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-3Initial cuts, fence set at 10 1/4" from endhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-2.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-2Dovetail bit installed, depth set using test piecehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-customfurniture-hdtvstand-joinery-1.jpgWoodworksbyJohn-LasVegas-CustomFurniture-HDTVStand-Joinery-12014-02-24T13:35:57+00:00monthlyhttps://woodworksbyjohn.com/2014/02/19/bare-faced-dovetail-critique-requested/2014-02-20T00:48:37+00:00monthlyhttps://woodworksbyjohn.com/2014/02/19/the-challenge-tv-stand-project/https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-hdtvstand-sapele-firststeps-drawerresaw-2.jpgWoodworksbyJohn-HDTVStand-Sapele-FirstSteps-DrawerResaw-2https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-hdtvstand-sapele-firststeps-drawerresaw-1.jpgWoodworksbyJohn-HDTVStand-Sapele-FirstSteps-DrawerResaw-1https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-hdtvstand-sapele-firststeps-4.jpgWoodworksbyJohn-HDTVStand-Sapele-FirstSteps-4https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-hdtvstand-sapele-firststeps-3.jpgWoodworksbyJohn-HDTVStand-Sapele-FirstSteps-3https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-hdtvstand-sapele-firststeps-2.jpgWoodworksbyJohn-HDTVStand-Sapele-FirstSteps-2https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-hdtvstand-sapele-firststeps-1.jpgWoodworksbyJohn-HDTVStand-Sapele-FirstSteps-1https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-customfurniture-tvstand-sapele-2.jpgWoodworksbyJohn-CustomFurniture-TVStand-Sapele-2Better look at what I bought, 52 board feet of 6/4 Sapele plus Maple.https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-customfurniture-tvstand-sapele-1.jpgWoodworksbyJohn-CustomFurniture-TVStand-Sapele-1Loaded up at Woodworkers Source in Phoenixhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-barefaceddovetail-exp.jpgWoodworksbyJohn-BarefacedDovetail-Exp3/8 Rabbet bit on scrap to set depthhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-barefaceddovetail-exp-9.jpgWoodworksbyJohn-BarefacedDovetail-Exp-92014-02-19T20:53:14+00:00monthlyhttps://woodworksbyjohn.com/2014/02/16/roman-shades-custom-pull/https://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-robcosman-1.jpgFamilyRoomRemodel-RomanShades-Pull-RobCosman-1Check out that shaving!https://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-finished.jpgFamilyRoomRemodel-RomanShades-Pull-FinishedEnd result!https://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-6.jpgFamilyRoomRemodel-RomanShades-Pull-6Finished with wax, applied with abrasive padhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-5.jpgFamilyRoomRemodel-RomanShades-Pull-5Smaller hole to pass cords (up to 7) throughhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-4.jpgFamilyRoomRemodel-RomanShades-Pull-4Large hole to conceal knot of cordshttps://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-2.jpgFamilyRoomRemodel-RomanShades-Pull-2Block planing to the linehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroomremodel-romanshades-pull-1.jpgFamilyRoomRemodel-RomanShades-Pull-1Drawing out 1/8" line for chamferhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/familyroom-remodel-drapes-1.jpgFamilyRoom-Remodel-Drapes-12014-02-16T16:28:07+00:00monthlyhttps://woodworksbyjohn.com/2014/02/09/repair-job-on-a-custom-stool/https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-11.jpgWoodworksbyJohn-StoolRepair-11Clamps removedhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-10.jpgWoodworksbyJohn-StoolRepair-10https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-9.jpgWoodworksbyJohn-StoolRepair-9https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-8.jpgWoodworksbyJohn-StoolRepair-8Refining shape with a block planehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-7.jpgWoodworksbyJohn-StoolRepair-7Trial and error, note how the leg split!https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-6.jpgWoodworksbyJohn-StoolRepair-6Initial forming with Jack planehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-5.jpgWoodworksbyJohn-StoolRepair-5Traced onto the caul, marks indicate leg widthhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-3.jpgWoodworksbyJohn-StoolRepair-3Copy Cat used to copy curvaturehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-2.jpgWoodworksbyJohn-StoolRepair-2https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-stoolrepair-1.jpgWoodworksbyJohn-StoolRepair-12014-02-10T15:20:31+00:00monthlyhttps://woodworksbyjohn.com/2014/02/07/from-the-bar-to-the-desk/https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-8.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-8Bottom painted and casters installed.https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-7.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-7Stick clamped on leg to guide drill bit angle.https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-6.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-6Flush cut saw had too fine of a cut so went to Japanese Razor saw.https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-5.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-5Tape to protect finish, first tried a flush cut saw.https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-4.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-4These assembly screws dictated caster placement.https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-3.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-3….. short of it!https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-2.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-2https://woodworksbyjohn.com/wp-content/uploads/2014/02/woodworksbyjohn-lasvegas-barstool-conversion-1.jpgWoodworksbyJohn-LasVegas-BarStool-Conversion-1The tall and …...2014-02-07T20:51:58+00:00monthlyhttps://woodworksbyjohn.com/2014/02/06/last-word-on-the-re-model/https://woodworksbyjohn.com/wp-content/uploads/2014/02/wallfinal2.jpgwallfinal2https://woodworksbyjohn.com/wp-content/uploads/2014/02/wallfinal1.jpgWallFinal1https://woodworksbyjohn.com/wp-content/uploads/2014/02/firstlook.jpgFirstLook…… and After2014-02-07T01:02:40+00:00monthlyhttps://woodworksbyjohn.com/2014/02/03/all-over-cept-the-clean-up/https://woodworksbyjohn.com/wp-content/uploads/2014/02/shop.jpgshopShop re-configured to cut long baseboards.https://woodworksbyjohn.com/wp-content/uploads/2014/02/molding2.jpgmolding2Let There be Moldinghttps://woodworksbyjohn.com/wp-content/uploads/2014/02/let-there-be-wine.jpglet there be winehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/let-there-be-light.jpgLet there be LightLet There be Light!https://woodworksbyjohn.com/wp-content/uploads/2014/02/let-there-be-molding-2.jpgLet there be Molding 2Let There be Cablehttps://woodworksbyjohn.com/wp-content/uploads/2014/02/coping.jpgCopingCoping the joints.2014-02-04T01:12:52+00:00monthlyhttps://woodworksbyjohn.com/2014/02/01/nineties-no-more/https://woodworksbyjohn.com/wp-content/uploads/2014/02/nineties-no-more-sat-noon.jpgNineties no more-Sat-noonAbout 10am, edged and readyhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/nineties-no-more-sat-am.jpgNineties no more-Sat-amhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/nineties-no-more-sat-2-30.jpgNineties no more-Sat-2-30First coat, around 2pmhttps://woodworksbyjohn.com/wp-content/uploads/2014/02/nineties-no-more-2.jpgNineties no more-2https://woodworksbyjohn.com/wp-content/uploads/2014/02/nineties-no-more-1.jpgNineties no more-1First light, Friday2014-02-02T04:26:38+00:00monthlyhttps://woodworksbyjohn.com/2014/01/27/custom-baseboard-no-problem/https://woodworksbyjohn.com/wp-content/uploads/2014/01/homeremodel-custombaseboardmolding-5.jpgHomeRemodel-CustomBaseboardMolding-5https://woodworksbyjohn.com/wp-content/uploads/2014/01/homeremodel-custombaseboardmolding-4.jpgHomeRemodel-CustomBaseboardMolding-4Large hole allows a gentle bend for the cablehttps://woodworksbyjohn.com/wp-content/uploads/2014/01/homeremodel-custombaseboardmolding-3.jpgHomeRemodel-CustomBaseboardMolding-3Dado location for basehttps://woodworksbyjohn.com/wp-content/uploads/2014/01/homeremodel-custombaseboardmolding-2.jpgHomeRemodel-CustomBaseboardMolding-2!" hole through OSB for cablehttps://woodworksbyjohn.com/wp-content/uploads/2014/01/homeremodel-custombaseboardmolding-1.jpgHomeRemodel-CustomBaseboardMolding-12014-02-02T02:36:51+00:00monthlyhttps://woodworksbyjohn.com/2014/01/25/ready-for-drywall-paint/https://woodworksbyjohn.com/wp-content/uploads/2014/01/finished.jpgfinished2014-01-25T22:14:45+00:00monthlyhttps://woodworksbyjohn.com/2014/01/24/twice-in-18-years-get-rid-of-it/https://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-7.jpgRoom Remodel-7 Before …….https://woodworksbyjohn.com/wp-content/uploads/2014/01/wallprogress.jpgWallProgresshttps://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-6b.jpgRoom Remodel-6bMiller time --- on the job?https://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-6a.jpgRoom Remodel-6aCombustibles right next to the Firebox!https://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-6.jpgRoom Remodel-6https://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-3.jpgRoom Remodel-3https://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-2.jpgRoom Remodel-2Fireplace wall insulatedhttps://woodworksbyjohn.com/wp-content/uploads/2014/01/room-remodel-1.jpgRoom Remodel-1Framing complete, only the top remains to be sheathed.2014-01-25T14:30:02+00:00monthlyhttps://woodworksbyjohn.com/2014/01/15/dovetails-dutchmen/https://woodworksbyjohn.com/wp-content/uploads/2014/01/dovetail-dutchman-final.jpgDovetail-Dutchman-finalAssembled with one coat of shellachttps://woodworksbyjohn.com/wp-content/uploads/2014/01/dovetail-dutchman-4.jpgDovetail-Dutchman-4Fine tuning the Dutchman with sandpaperhttps://woodworksbyjohn.com/wp-content/uploads/2014/01/dovetail-dutchman-2.jpgDovetail-Dutchman-2Cutting Dutchman, tablesaw and rip fence.https://woodworksbyjohn.com/wp-content/uploads/2014/01/dovetail-dutchman-3.jpgDovetail-Dutchman-3https://woodworksbyjohn.com/wp-content/uploads/2014/01/dovetail-dutchman-1.jpgDovetail-Dutchman-12014-01-16T15:11:02+00:00monthlyhttps://woodworksbyjohn.com/2014/01/01/first-of-the-year-first-glue-up/https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-pins-6.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Pins-6Ready for some final tweaking.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-pins-5.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Pins-5Remaining material chiseled out.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-pins-3.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Pins-3After extending the line, I'll cut the pins with jig in place.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-pins-2.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Pins-2Before removing shoulder I notch with chisel to aid starting the saw.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-pins-1.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Pins-1Transferring the tails in special jig.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-assy-7.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Assy-7Grooved out on tablesaw, about 1/8" deep.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-assy-6.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Assy-6Roughly lay out tail locations.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-assy-5.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Assy-5https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-assy-4.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Assy-4Finishing cut with chisel and mallet.https://woodworksbyjohn.com/wp-content/uploads/2014/01/handcutdovetails-walnut-quartersawnwhiteoak-assy-3.jpgHandcutDovetails-Walnut-QuarterSawnWhiteOak-Assy-3Extending lid slot to edge of board.2014-01-02T03:33:38+00:00monthlyhttps://woodworksbyjohn.com/2013/12/26/love-hand-planes/https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-11.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-11Squaring the edge for the sides.https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-10.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-10Completed lidhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-9.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-9https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-8.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-8https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-7.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-7https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-6.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-6https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-3Old school way to check for a true edge.https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-5High tech way to check for a true edge.https://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-2Full Length Shaving -- Alderhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/woodworksbyjohn-customfurniture-lasvegas-handplaning-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-Handplaning-12015-07-30T00:07:03+00:00monthlyhttps://woodworksbyjohn.com/2013/12/19/2-x-4-x-8-challenge-december-2013-sin-city-woodworkers/https://woodworksbyjohn.com/wp-content/uploads/2013/12/image-18.jpgImage 18Proof of the "quality" material.https://woodworksbyjohn.com/wp-content/uploads/2013/12/jamiechallengelogo.pngJamieChallengeLogohttps://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-stool.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-Stoolhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-legs-tenons.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-Legs-TenonsMitered tenons for top stretcher.https://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-legs-mortises.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-Legs-MortisesAll mortises cut for top and bottom stretchers.https://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-legs-tapered.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-Legs-TaperedBottom of legs tapered on tablesaw.https://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-legs-dowels.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-Legs-DowelsPegs formed from Chakte Kokhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-legs-4.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-legs-4Detail on top of legs, hand chamfered.https://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-legs-1.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-Legs-1PIeces ripped, planed, and identified as to leg layout.https://woodworksbyjohn.com/wp-content/uploads/2013/12/2x4x8-challenge-woodworksbyjohn-sincitywoodworkers-hongkongseagrass-wovenseat-3.jpg2x4x8 Challenge-WoodworksbyJohn-SinCityWoodworkers-HongKongSeaGrass-WovenSeat-3Figuring out the pattern and then weaving away!2013-12-19T22:32:52+00:00monthlyhttps://woodworksbyjohn.com/2013/12/17/dyed-box-is-in-the-mail/https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedbox-inspiration.jpgDyedBox-Inspirationhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedbox-complete-2.jpgDyedBox-Complete-2Box Closedhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/dyed-box-woodworksbyjohn-complete-1.jpgDyed Box-WoodworksbyJohn-Complete-1Box Open2013-12-18T00:41:37+00:00monthlyhttps://woodworksbyjohn.com/2013/12/13/dyed-black-box-built-in-dust-check/https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-woodworksbyjohn-lasvegas-dyedbox.jpgDustCheck-WoodworksbyJohn-LasVegas-DyedBoxhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-woodworksbyjohn-lasvegas-completecheck.jpgDustCheck-WoodworksbyJohn-LasVegas-CompleteCheckHere's the finished dust check installed. The picture showing it prior to dying the box didn't come out!https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-woodworksbyjohn-lasvegas-4.jpgDustCheck-WoodworksbyJohn-LasVegas-4Once they fit properly, a taper is planed on the protruding edge for clearance.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-woodworksbyjohn-lasvegas-3.jpgDustCheck-WoodworksbyJohn-LasVegas-3After ripping pieces to width they are mitered with a Japanese saw and a bench hook.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-woodworksbyjohn-lasvegas-2.jpgDustCheck-WoodworksbyJohn-LasVegas-2https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-woodworksbyjohn-lasvegas-1.jpgDustCheck-WoodworksbyJohn-LasVegas-12013-12-14T04:03:19+00:00monthlyhttps://woodworksbyjohn.com/2013/12/07/dyed-plywood-box-assembled-in-spite-of-cold-shop/https://woodworksbyjohn.com/wp-content/uploads/2013/12/plywoodboxes-topsbottoms-l-fence-6.jpgPlywoodBoxes-Tops:Bottoms-L-Fence-6Finally, some quiet handwork to even out the rabbet.https://woodworksbyjohn.com/wp-content/uploads/2013/12/plywoodboxes-topsbottoms-l-fence-5.jpgPlywoodBoxes-Tops:Bottoms-L-Fence-5Completed rabbet all around piece.https://woodworksbyjohn.com/wp-content/uploads/2013/12/plywoodboxes-topsbottoms-l-fence-4.jpgPlywoodBoxes-Tops:Bottoms-L-Fence-4First cuts were across the grain -- even though this is plywood!https://woodworksbyjohn.com/wp-content/uploads/2013/12/plywoodboxes-topsbottoms-l-fence-3.jpgPlywoodBoxes-Tops:Bottoms-L-Fence-3Fence is adjusted to cut slightly more than thickness of plywood sides.https://woodworksbyjohn.com/wp-content/uploads/2013/12/plywoodboxes-topsbottoms-l-fence-2.jpgPlywoodBoxes-Tops:Bottoms-L-Fence-2Dado head is adjusted to cut 1/4" deep.https://woodworksbyjohn.com/wp-content/uploads/2013/12/plywoodboxes-topsbottoms-l-fence-1.jpgPlywoodBoxes-Tops:Bottoms-L-Fence-1Fence is attached and height is adjusted to about 3/8" above table top.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-precut-dyedbox-assembled.jpgDustCheck-Precut-DyedBox-Assembledhttps://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-precut-dyedbox-2.jpgDustCheck-Precut-DyedBox-2https://woodworksbyjohn.com/wp-content/uploads/2013/12/dustcheck-precut-dyedbox-1.jpgDustCheck-Precut-DyedBox-12013-12-08T13:37:44+00:00monthlyhttps://woodworksbyjohn.com/2013/12/03/dyed-plywood-box-cutting-the-sides/https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedplywood-miteredboxes-splinemiter-6.jpgDyedPlywood-MiteredBoxes-Spline:Miter-6Custom ordered box dry fit together, note tape with markings used to keep grain continuous.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedplywood-miteredboxes-splinemiter-5.jpgDyedPlywood-MiteredBoxes-Spline:Miter-5Test fit of spline into the saw kerfs.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedplywood-miteredboxes-splinemiter-4.jpgDyedPlywood-MiteredBoxes-Spline:Miter-4Mitered edge being cut, note the stop block.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedplywood-miteredboxes-splinemiter-3.jpgDyedPlywood-MiteredBoxes-Spline:Miter-3Spacer block is put between stop block to cut the shorter piece.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedplywood-miteredboxes-splinemiter-2.jpgDyedPlywood-MiteredBoxes-Spline:Miter-2Piece is flipped over to have miter cut in the proper direction.https://woodworksbyjohn.com/wp-content/uploads/2013/12/dyedplywood-miteredboxes-splinemiter-1.jpgDyedPlywood-MiteredBoxes-Spline:Miter-1Stop block set for longest piece -- cut it.2013-12-04T03:35:54+00:00monthlyhttps://woodworksbyjohn.com/2013/11/30/applying-felt-on-box-sides-not-just-the-bottom-2/2013-12-01T05:44:42+00:00monthlyhttps://woodworksbyjohn.com/2013/11/19/down-to-the-wire/https://woodworksbyjohn.com/wp-content/uploads/2013/11/armcuff-presentationbox-monkeypod-3.jpgArmCuff-PresentationBox-Monkeypod-3Arm Cuff Presentation Box -- Front Viewhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/armcuff-presentationbox-monkeypod-2.jpgArmCuff-PresentationBox-Monkeypod-2Arm Cuff Presentation Box -- Rear Viewhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/armcuff-presentationbox-monkeypod-1.jpgArmCuff-PresentationBox-Monkeypod-1Arm Cuff Presentation Box -- Open2013-12-01T05:43:33+00:00monthlyhttps://woodworksbyjohn.com/2013/11/30/always-something-to-learn/https://woodworksbyjohn.com/wp-content/uploads/2013/11/wooodworksbyjohn-l-fence-1.jpgWooodworksbyJohn-L Fence- 1https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-l-fence-2.jpgWoodworksbyJohn-L Fence-22013-12-01T02:41:03+00:00monthlyhttps://woodworksbyjohn.com/2013/11/21/applying-felt-on-box-sides-not-just-the-bottom/https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-monkeypod-finished-presentationbox.jpgFeltLining-BoxSides-WoodworksbyJohn-Monkeypod-Finished-PresentationBoxSilver Arm Cuff Presentation Box Completed 11-20-2013https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-8.jpgFeltLining-BoxSides-WoodworksbyJohn-8https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-7.jpgFeltLining-BoxSides-WoodworksbyJohn-7https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-6.jpgFeltLining-BoxSides-WoodworksbyJohn-6https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-5.jpgFeltLining-BoxSides-WoodworksbyJohn-5Bottom seated in the box.https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-4.jpgFeltLining-BoxSides-WoodworksbyJohn-4Try to push into place evenly.https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-3.jpgFeltLining-BoxSides-WoodworksbyJohn-3https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-2.jpgFeltLining-BoxSides-WoodworksbyJohn-2https://woodworksbyjohn.com/wp-content/uploads/2013/11/feltlining-boxsides-woodworksbyjohn-1.jpgFeltLining-BoxSides-WoodworksbyJohn-12013-12-06T15:27:57+00:00monthlyhttps://woodworksbyjohn.com/2013/09/03/hand-cut-dovetails-mass-produced/https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-15.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-15https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-14.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-14https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-13.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-13Board is flipped, notice how the "140 trick" helps hold the chisel perpendicular. https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-11.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-11Initial wedge of wood chiseled out.https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-10.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-10Resulting cut (out of focus!) but clean.https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-9.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-9This provides a flat spot for your crosscut saw.https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-8.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-8Begin by chiseling a notch on scribed line.https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-7.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-7Both tail boards cut at same time.https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-6.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-6Cut a strip of wood 1/6 angle that could be placed on rabbet better.https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-customwoodworker-dovetailtutorial-5.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-DovetailTutorial-5Hard to balance lay out gauge on rabbet.2013-11-16T02:57:41+00:00monthlyhttps://woodworksbyjohn.com/2013/11/15/arm-cuff-presentation-box/2013-11-16T02:42:09+00:00monthlyhttps://woodworksbyjohn.com/2013/11/15/walnut-monkeypod-finger-jointed-boxes-done/https://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutfingerjointbox-slidingtray-woodworksbyjohn-3.jpgWalnutFingerJointBox-Slidingtray-WoodworksbyJohn-3Right Viewhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutfingerjointbox-slidingtray-woodworksbyjohn-2.jpgWalnutFingerJointBox-Slidingtray-WoodworksbyJohn-2Black Walnut with Ebony lid lift and a sliding tray.https://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutfingerjointbox-slidingtray-woodworksbyjohn-1.jpgWalnutFingerJointBox-Slidingtray-WoodworksbyJohn-1Left Viewhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-silverarmcuff-custompresentationbox-woodworksbyjohn.jpgMonkeypod-SilverArmCuff-CustomPresentationBox-WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-silverarmcuff-custompresentationbox-woodworksbyjohn-3.jpgMonkeypod-SilverArmCuff-CustomPresentationBox-WoodworksbyJohn-3Backhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-silverarmcuff-custompresentationbox-woodworksbyjohn-2.jpgMonkeypod-SilverArmCuff-CustomPresentationBox-WoodworksbyJohn-2Lid Openedhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-silverarmcuff-custompresentationbox-woodworksbyjohn-1.jpgMonkeypod-SilverArmCuff-CustomPresentationBox-WoodworksbyJohn-1Fronthttps://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-wood-memorybox-woodworksbyjohn-2.jpgMonkeypod wood-MemoryBox-WoodworksbyJohn-2Rectangular and taller Monkeypod box.https://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-wood-memorybox-woodworksbyjohn-1.jpgMonkeypod wood-MemoryBox-WoodworksbyJohn-1Short and square Monkeypod box.2013-11-15T22:43:28+00:00monthlyhttps://woodworksbyjohn.com/2013/11/13/monkeypod-wood-dovetails-challenge/https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-3Waste was marked right away to avoid removing the wrong part!https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-7.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-7Each board was flipped over to remove the waste from the other side.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-6.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-6Waste material removed from the show side first, set both pieces in line in a semi-production mode.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-5All cuts were made on every board at one time.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-4Couldn't use the jigs fence for one side so a square is used to line pieces up.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-2Using a guide jig, tails are transferred to pin board.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-1Starts by scribing tail thickness on pin board. https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-customfurniture-lasvegas-monkeypodbox-dovetails.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonkeypodBox-Dovetails-https://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-dovetails-woodworksbyjohn-6.jpgMonkeyPod-Dovetails-WoodworksbyJohn-6Tails done.https://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypod-dovetails-woodworksbyjohn-5.jpgMonkeyPod-Dovetails-WoodworksbyJohn-5Removing waste between tails, spacer under the rabbet steadies the board.2013-11-13T15:03:09+00:00monthlyhttps://woodworksbyjohn.com/2013/11/10/silver-arm-cuff-presentation-box/https://woodworksbyjohn.com/wp-content/uploads/2013/11/armcuffbox-woodworksbyjohn-customwood-lasvegas-3.jpgPractice dovetail and box parts.https://woodworksbyjohn.com/wp-content/uploads/2013/11/armcuffbox-woodworksbyjohn-customwood-lasvegas-2.jpgArmCuffBox-WoodworksbyJohn-CustomWood-LasVegas-2Stanley 140 trick with dado head and miter gauge.https://woodworksbyjohn.com/wp-content/uploads/2013/11/armcuffbox-woodworksbyjohn-customwood-lasvegas-1.jpgArmCuffBox-WoodworksbyJohn-CustomWood-LasVegas-12013-11-11T04:11:14+00:00monthlyhttps://woodworksbyjohn.com/2013/11/09/monkeypod-wood-and-a-lid-lift/https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-lasvegas-lidlift-monkeypod-6.jpgWoodworksbyJohn-LasVegas-LidLift-Monkeypod-6https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-lasvegas-lidlift-monkeypod-5.jpgWoodworksbyJohn-LasVegas-LidLift-Monkeypod-5Make a series of cuts with a dovetail saw and remove waste with chisel followed by the router plane.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-lasvegas-lidlift-monkeypod-4.jpgWoodworksbyJohn-LasVegas-LidLift-Monkeypod-4Use that to scribe the depth on the lid. Easier to control than a marking knife.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-lasvegas-lidlift-monkeypod-3.jpgWoodworksbyJohn-LasVegas-LidLift-Monkeypod-3Set a small router plane (Stanley#271) for the thickness of the rabbeted part of the lift.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-lasvegas-lidlift-monkeypod-2.jpgWoodworksbyJohn-LasVegas-LidLift-Monkeypod-2Center lift and scribe location. After scribing the first side I cover that line by sliding the lift before scribing the other side. This gives you a snug fit.https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-lasvegas-lidlift-monkeypod-1.jpgWoodworksbyJohn-LasVegas-LidLift-Monkeypod-12013-11-09T23:39:30+00:00monthlyhttps://woodworksbyjohn.com/2013/11/08/walnut-box-sliding-tray-and-miscellaneous/https://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutebony.jpgWalnut:Ebonyhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/slidingtray-insideout-woodworksbyjohn-5.jpgSlidingTray-InsideOut-WoodworksbyJohn-5All done!https://woodworksbyjohn.com/wp-content/uploads/2013/11/slidingtray-insideout-woodworksbyjohn-4.jpgSlidingTray-InsideOut-WoodworksbyJohn-4https://woodworksbyjohn.com/wp-content/uploads/2013/11/slidingtray-insideout-woodworksbyjohn-3.jpgSlidingTray-InsideOut-WoodworksbyJohn-3Dry fit of bottom into the tray.https://woodworksbyjohn.com/wp-content/uploads/2013/11/slidingtray-insideout-woodworksbyjohn-2.jpgSlidingTray-InsideOut-WoodworksbyJohn-2Rabbeting on the tablesaw, kind of small but I'm careful!https://woodworksbyjohn.com/wp-content/uploads/2013/11/slidingtray-insideout-woodworksbyjohn-1.jpgSlidingTray-InsideOut-WoodworksbyJohn-12013-11-09T17:45:55+00:00monthlyhttps://woodworksbyjohn.com/2013/11/06/assembled-but-still-a-ways-to-go/https://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutbox-etsycommission-stanley101.jpgWalnutBox-EtsyCommission-Stanley101https://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutbox-etsycommission-dated.jpgWalnutBox-EtsyCommission-Datedhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutbox-etsycommission-cardscraper.jpgWalnutBox-EtsyCommission-CardScraperhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/walnutbox-etsycommission-assembled.jpgWalnutBox-EtsyCommission-Assembledhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypodwood-box-etsycommission-doubleradius-tadpolesander.jpgMonkeypodWood-Box-EtsyCommission-DoubleRadius-tadpolesanderAssortment of tadpole sanding blocks.https://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypodwood-box-etsycommission-doubleradius-2.jpgMonkeypodWood-Box-EtsyCommission-DoubleRadius-2Edge refined and smoothed with tadpole sanding block.https://woodworksbyjohn.com/wp-content/uploads/2013/11/monkeypodwood-box-etsycommission-doubleradius-1.jpgMonkeypodWood-Box-EtsyCommission-DoubleRadius-1Radius put on box top edge.2013-11-06T20:57:16+00:00monthlyhttps://woodworksbyjohn.com/2013/11/04/walnut-finger-joints-etsy-custom-work/https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworksbyjohn-tablesawsled-fingerjoint.jpgWoodworksbyJohn-TablesawSled-FingerJointhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/customwalnutbox-fingerjoints-woodworksbyjohn-4.jpgCustomWalnutBox-FingerJoints-WoodworksbyJohn-4Woodsmith Jighttps://woodworksbyjohn.com/wp-content/uploads/2013/11/customwalnutbox-fingerjoints-woodworksbyjohn-3.jpgCustomWalnutBox-FingerJoints-WoodworksbyJohn-3https://woodworksbyjohn.com/wp-content/uploads/2013/11/customwalnutbox-fingerjoints-woodworksbyjohn-1.jpgCustomWalnutBox-FingerJoints-WoodworksbyJohn-12013-11-05T02:43:38+00:00monthlyhttps://woodworksbyjohn.com/2013/11/01/from-sketch-up-to-reality/https://woodworksbyjohn.com/wp-content/uploads/2013/11/woodworkbyjohn.jpgWoodworkbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2013/11/victorianbookshopbell-woodworksbyjohn-customfurniture-lasvegas-6.jpgVictorianBookshopBell-WoodworksbyJohn-CustomFurniture-LasVegas-6Two + inch radius being smoothed out with sandpaper wrapped around a socket!https://woodworksbyjohn.com/wp-content/uploads/2013/11/victorianbookshopbell-woodworksbyjohn-customfurniture-lasvegas-5.jpgVictorianBookshopBell-WoodworksbyJohn-CustomFurniture-LasVegas-5Then, any remaining wood was carefully pared away.https://woodworksbyjohn.com/wp-content/uploads/2013/11/victorianbookshopbell-woodworksbyjohn-customfurniture-lasvegas-4.jpgVictorianBookshopBell-WoodworksbyJohn-CustomFurniture-LasVegas-4First the piece is cut out with a crosscut saw.https://woodworksbyjohn.com/wp-content/uploads/2013/11/victorianbookshopbell-woodworksbyjohn-customfurniture-lasvegas-3.jpgVictorianBookshopBell-WoodworksbyJohn-CustomFurniture-LasVegas-3Corners of lid need to be radiused to fit in grooves.https://woodworksbyjohn.com/wp-content/uploads/2013/11/victorianbookshopbell-woodworksbyjohn-customfurniture-lasvegas-2.jpgVictorianBookshopBell-WoodworksbyJohn-CustomFurniture-LasVegas-2https://woodworksbyjohn.com/wp-content/uploads/2013/11/victorianbookshopbell-woodworksbyjohn-customfurniture-lasvegas-1.jpgVictorianBookshopBell-WoodworksbyJohn-CustomFurniture-LasVegas-12013-11-02T21:18:25+00:00monthlyhttps://woodworksbyjohn.com/2013/10/30/victorian-bell-mount-continued/https://woodworksbyjohn.com/wp-content/uploads/2013/10/victorianbooksellers-antiquebell-4.jpgVictorianBookSellers-AntiqueBell-4https://woodworksbyjohn.com/wp-content/uploads/2013/10/victorianbooksellers-antiquebell-3.jpgVictorianBookSellers-AntiqueBell-3https://woodworksbyjohn.com/wp-content/uploads/2013/10/victorianbooksellers-antiquebell-2.jpgVictorianBookSellers-AntiqueBell-2https://woodworksbyjohn.com/wp-content/uploads/2013/10/victorianbooksellers-antiquebell-1.jpgVictorianBookSellers-AntiqueBell-12013-10-30T21:39:17+00:00monthlyhttps://woodworksbyjohn.com/2013/10/28/antique-victorian-bell-commission/https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-bookstorebell-5.jpgWoodworksbyJohn-CustomWoodworker-BookstoreBell-5https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-bookstorebell-6.jpgWoodworksbyJohn-CustomWoodworker-BookstoreBell-6https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-bookstorebell-4.jpgWoodworksbyJohn-CustomWoodworker-BookstoreBell-4https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-bookstorebell-3.jpgWoodworksbyJohn-CustomWoodworker-BookstoreBell-3https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-bookstorebell-2.jpgWoodworksbyJohn-CustomWoodworker-BookstoreBell-2https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-bookstorebell-1.jpgWoodworksbyJohn-CustomWoodworker-BookstoreBell-1https://woodworksbyjohn.com/wp-content/uploads/2013/10/screen-shot-2013-10-26-at-7-13-09-am.pngScreen Shot 2013-10-26 at 7.13.09 AM2013-10-29T03:13:24+00:00monthlyhttps://woodworksbyjohn.com/2013/10/27/scrub-plane-in-fine-woodworking-magazine/https://woodworksbyjohn.com/wp-content/uploads/2013/10/tools-shop-2014.jpgTools & Shop 2014https://woodworksbyjohn.com/wp-content/uploads/2013/10/scrubplane.jpgScrubPlane2013-12-30T18:59:04+00:00monthlyhttps://woodworksbyjohn.com/2013/10/22/mortises-two-ways/https://woodworksbyjohn.com/wp-content/uploads/2013/10/blacklimba2.jpgBlackLimba2Open, note black hinges to match Ebony lift.https://woodworksbyjohn.com/wp-content/uploads/2013/10/blacklimba1.jpgBlackLimba1Looks greenish rather than black but nice grain!https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-workbench.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-WorkBenchhttps://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-7.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-7https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-6.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-6https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-5.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-5https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-4.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-4https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-3.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-3Notice the wedge removed with chisel prior to sawing.https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-2.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-2https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-customwoodworker-lasvegas-mortises-1.jpgWoodworksbyJohn-CustomWoodworker-LasVegas-Mortises-12013-10-23T14:26:40+00:00monthlyhttps://woodworksbyjohn.com/2013/10/18/macacauba-box-complete/https://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-box-woodworksbyjohn-lasvegas.jpgMacacauba Box- WoodworksbyJohn-LasVegas2013-10-18T21:55:31+00:00monthlyhttps://woodworksbyjohn.com/2013/10/17/kaizen-foam/https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-macacauba-specialorder-3.jpgWoodworksbyJohn-Macacauba-SpecialOrder-3https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-macacauba-specialorder-2.jpgWoodworksbyJohn-Macacauba-SpecialOrder-2Black Limba, Birdseye Maple, Macacaubahttps://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-macacauba-specialorder.jpgWoodworksbyJohn-Macacauba-SpecialOrder-!Macacauba, Birdseye Maple, Black Limbahttps://woodworksbyjohn.com/wp-content/uploads/2013/10/kaezenfoam-iphone-3.jpgKaezenFoam-Iphone-3Kaizen Foam with iPhonehttps://woodworksbyjohn.com/wp-content/uploads/2013/10/kaezenfoam-iphone-2.jpgKaezenFoam-Iphone-2https://woodworksbyjohn.com/wp-content/uploads/2013/10/kaezenfoam-iphone-1.jpgKaezenFoam-Iphone-12013-10-17T20:17:47+00:00monthlyhttps://woodworksbyjohn.com/2013/10/15/summerlin-art-festival/https://woodworksbyjohn.com/wp-content/uploads/2013/10/summerlinartfestival-3.jpgSummerlinArtFestival-3https://woodworksbyjohn.com/wp-content/uploads/2013/10/summerlinartfestival-2.jpgSummerlinArtFestival-2https://woodworksbyjohn.com/wp-content/uploads/2013/10/summerlinartfestival-1.jpgSummerlinArtFestival-12013-10-16T14:09:15+00:00monthlyhttps://woodworksbyjohn.com/2013/10/10/work-continues-planes-raised-panels-routers/https://woodworksbyjohn.com/wp-content/uploads/2013/10/img_0033.jpgIMG_0033https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-lasvegas-raisedpaneltop-4.jpgWoodworksbyJohn-LasVegas-RaisedPanelTop-4Finished top dry fit into box.https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-lasvegas-raisedpaneltop-3.jpgWoodworksbyJohn-LasVegas-RaisedPanelTop-3Using a block rabbet plane to fine tune the tongue.https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-lasvegas-raisedpaneltop-2.jpgWoodworksbyJohn-LasVegas-RaisedPanelTop-2Panel is raised with this fixture at 15 degrees. Fixture slides over the rip fence.https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-lasvegas-raisedpaneltop-1.jpgWoodworksbyJohn-LasVegas-RaisedPanelTop-1Tongue cut by holding vertical against rip fence, several passes required.https://woodworksbyjohn.com/wp-content/uploads/2013/10/woodworksbyjohn-lasvegas-lienielsen-smoothplane.jpgWoodworksbyJohn-LasVegas-LieNielsen-SmoothPlanehttps://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-lidlift-5.jpgLidded Fingerjoint Box-lidlift-5https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-lidlift-4.jpgLidded Fingerjoint Box-lidlift-4Cleaned out to required depth; shown on Maple box for clarity.https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-lidlift-3.jpgLidded Fingerjoint Box-lidlift-3Two routers, power on left & hand on right.https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-lidlift-2.jpgLidded Fingerjoint Box-lidlift-22016-06-30T02:08:59+00:00monthlyhttps://woodworksbyjohn.com/2013/10/08/forgot-about-the-complexity/https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-woodworksbyjohn-lasvegaswoodworker-5.jpgLidded FingerJoint Box-WoodworksbyJohn-LasVegasWoodworker-5https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-woodworksbyjohn-lasvegaswoodworker-4.jpgLidded FingerJoint Box-WoodworksbyJohn-LasVegasWoodworker-4https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-woodworksbyjohn-lasvegaswoodworker-3.jpgLidded FingerJoint Box-WoodworksbyJohn-LasVegasWoodworker-3https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-woodworksbyjohn-lasvegaswoodworker-2.jpgLidded FingerJoint Box-WoodworksbyJohn-LasVegasWoodworker-2Side placed in Jig for first hole. The Pine piece is the Jig.https://woodworksbyjohn.com/wp-content/uploads/2013/10/lidded-fingerjoint-box-woodworksbyjohn-lasvegaswoodworker-1.jpgLidded FingerJoint Box-WoodworksbyJohn-LasVegasWoodworker-1Piece moved in jig to drill all holes.https://woodworksbyjohn.com/wp-content/uploads/2013/10/lee-valley-bit-2.jpgLee Valley Bit-2Drawing Radius for Bottom Piecehttps://woodworksbyjohn.com/wp-content/uploads/2013/10/lee-valley-bit-1.jpgLee Valley Bit-1Slot Cutter in Router Table2013-10-08T19:53:22+00:00monthlyhttps://woodworksbyjohn.com/2013/10/04/latest-custom-order-from-etsy/https://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-d.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-dBox Sides Marked for Re-Assemblyhttps://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-c.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-cCutting Box Sides (notice spacer)https://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-b.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-bhttps://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-4.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-4https://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-3.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-3Back side is scribed to prevent blow-out.https://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-2.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-2One Piece Clamped to Jig, All others get first cut.https://woodworksbyjohn.com/wp-content/uploads/2013/10/macacauba-woodworksbyjohn-customorder-fingerjoint-1.jpgMacacauba-WoodworksbyJohn-CustomOrder-FingerJoint-1First piece is cut on both ends.2013-10-05T14:42:21+00:00monthlyhttps://woodworksbyjohn.com/2013/09/25/final-steps-on-eyeglass-cases/https://woodworksbyjohn.com/wp-content/uploads/2013/09/fingergrip1.jpgfingergrip1https://woodworksbyjohn.com/wp-content/uploads/2013/09/connor.jpgConnorhttps://woodworksbyjohn.com/wp-content/uploads/2013/09/eyeglasscase-woodworksbyjohn-custometsy-3.jpgEyeglassCase-WoodworksbyJohn-CustomEtsy-3https://woodworksbyjohn.com/wp-content/uploads/2013/09/eyeglasscase-woodworksbyjohn-custometsy-2.jpgEyeglassCase-WoodworksbyJohn-CustomEtsy-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/eyeglasscase-woodworksbyjohn-custometsy-1.jpgEyeglassCase-WoodworksbyJohn-CustomEtsy-12013-09-28T03:44:22+00:00monthlyhttps://woodworksbyjohn.com/2013/09/27/gimlets-and-sossed/https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-13.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-13Washer in place.https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-12.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-12To raise the washer and increase magnet power, place a small washer underneath it.https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-11.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-11https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-10.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-10After screwing washer in place, the magnet hides the screw.https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-8.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-8https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-7.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-7Insert magnet holding washer and use gimlet. https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-6.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-6Last of all, tighten up the tensioning screws in each barrel.https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-5.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-5When completely inserted this is what you want to see!https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-4.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-4Once they are started, close box and squeeze together, alternating sides.https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-furnituremaker-lasvegas-3.jpgCustomEyeglassCase-WoodworksbyJohn-FurnitureMaker-LasVegas-3Use a stop to align sides and insert hinge gradually into the holes, alternate to keep things even.2013-09-28T03:43:08+00:00monthlyhttps://woodworksbyjohn.com/2013/09/23/monster-truck-on-the-road/https://woodworksbyjohn.com/wp-content/uploads/2013/07/connors-truck-rear.jpgConnor's Truck-rearhttps://woodworksbyjohn.com/wp-content/uploads/2013/07/connors-truck-front.jpgConnor's Truck-front2013-09-23T16:00:40+00:00monthlyhttps://woodworksbyjohn.com/2013/09/23/monster-truck-continued/https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-tailgate-5.jpgConnorsMonsterTruck-WoodworksbyJohn-Tailgate-5I Like It !!https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-tailgate-4.jpgConnorsMonsterTruck-WoodworksbyJohn-Tailgate-4https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-tailgate-2.jpgConnorsMonsterTruck-WoodworksbyJohn-Tailgate-2https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-tailgate-1.jpgConnorsMonsterTruck-WoodworksbyJohn-Tailgate-1https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-4.jpgConnorsMonsterTruck-WoodworksbyJohn-4https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-3.jpgConnorsMonsterTruck-WoodworksbyJohn-3https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-2.jpgConnorsMonsterTruck-WoodworksbyJohn-2https://woodworksbyjohn.com/wp-content/uploads/2013/07/connorsmonstertruck-woodworksbyjohn-1.jpgConnorsMonsterTruck-WoodworksbyJohn-12013-09-23T14:21:16+00:00monthlyhttps://woodworksbyjohn.com/2013/09/22/monster-truck-tires/2016-09-23T03:32:08+00:00monthlyhttps://woodworksbyjohn.com/2013/09/22/happy-birthday-connor/2013-09-22T15:33:07+00:00monthlyhttps://woodworksbyjohn.com/2013/09/17/custom-order-for-the-u-k/https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-lasvegas-6.jpgCustomEyeglassCase-WoodworksbyJohn-LasVegas-6https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-lasvegas-5.jpgCustomEyeglassCase-WoodworksbyJohn-LasVegas-5https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-lasvegas-4.jpgCustomEyeglassCase-WoodworksbyJohn-LasVegas-4https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-lasvegas-2.jpgCustomEyeglassCase-WoodworksbyJohn-LasVegas-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/customeyeglasscase-woodworksbyjohn-lasvegas-1.jpgCustomEyeglassCase-WoodworksbyJohn-LasVegas-1https://woodworksbyjohn.com/wp-content/uploads/2013/09/reading-glasses.jpgReading Glasses2013-09-18T20:45:43+00:00monthlyhttps://woodworksbyjohn.com/2013/09/15/platform-bed-installation-and-sleep-test/https://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-lasvegas-woodworksbyjohn-1.jpgPlatformBed-LasVegas-WoodworksbyJohn-1https://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-whew.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-whewhttps://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-6.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-6….. the other. Front rim piece joins both and screws from underneathhttps://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-5.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-5One side of plywood then…….https://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-4.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-4Cross braces installed and screwed into the insertshttps://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-3.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-3Footboard attached with angle brackets https://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-2.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-2Left & Right units in positionhttps://woodworksbyjohn.com/wp-content/uploads/2013/09/platformbed-custom-lasvegas-woodworksbyjohn-sequence-1.jpgPlatformBed-Custom-LasVegas-WoodworksbyJohn-Sequence-1Cleaned out and ready, what a difference in the carpet!2013-09-16T02:02:23+00:00monthlyhttps://woodworksbyjohn.com/2013/09/14/platform-bed-next-blog-and-ill-be-in-it/https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetails-threaded-insert-5.jpgWoodworksbyJohn-PlatformBed-Framedetails-Threaded Insert-5https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetails-threaded-insert-3.jpgWoodworksbyJohn-PlatformBed-Framedetails-Threaded Insert-3https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetails-threaded-insert-2.jpgWoodworksbyJohn-PlatformBed-Framedetails-Threaded Insert-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetails-threaded-insert-1.jpgWoodworksbyJohn-PlatformBed-Framedetails-Threaded Insert-1https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetails-2.jpgWoodworksbyJohn-PlatformBed-Framedetails-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetails-1.jpgWoodworksbyJohn-PlatformBed-Framedetails-1https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-framedetail-4.jpgWoodworksbyJohn-PlatformBed-Framedetail-42013-09-14T23:53:59+00:00monthlyhttps://woodworksbyjohn.com/2013/09/12/platform-bed-progress/https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-platformbed-panelframe-6.jpgWoodworksbyJohn-LasVegas-PlatformBed-Panel&Frame-6https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-platformbed-panelframe-5.jpgWoodworksbyJohn-LasVegas-PlatformBed-Panel&Frame-5Mass Production, eh -- Efficiency in Action!https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-platformbed-panelframe-4.jpgWoodworksbyJohn-LasVegas-PlatformBed-Panel&Frame-4Initial Cut, Pencil Mark is Used as a Guide Linehttps://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-platformbed-panelframe-3.jpgWoodworksbyJohn-LasVegas-PlatformBed-Panel&Frame-3Scribing for Tenon https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-platformbed-panelframe-2.jpgWoodworksbyJohn-LasVegas-PlatformBed-Panel&Frame-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegas-platformbed-panelframe-1.jpgWoodworksbyJohn-LasVegas-PlatformBed-Panel&Frame-1https://woodworksbyjohn.com/wp-content/uploads/2013/09/lienielsen-rabbetblockplane-woodworksbyjohn.jpgLieNielsen-RabbetBlockPlane-WoodworksbyJohn2013-09-12T19:35:03+00:00monthlyhttps://woodworksbyjohn.com/2013/09/10/new-project-platform-bed/https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-lasvegas-2.jpgWoodworksbyJohn-PlatformBed-LasVegas-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-platformbed-lasvegas-1.jpgWoodworksbyJohn-PlatformBed-LasVegas-1https://woodworksbyjohn.com/wp-content/uploads/2013/09/platform-bed.jpgPlatform Bed2013-09-10T23:53:40+00:00monthlyhttps://woodworksbyjohn.com/2013/09/07/hand-cut-dovetails-part-2/https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegasfurnituremaker-dovetail-tutorial-14.jpgWoodworksbyJohn-LasVegasFurnituremaker-Dovetail-Tutorial-14https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegasfurnituremaker-dovetail-tutorial-12.jpgWoodworksbyJohn-LasVegasFurnituremaker-Dovetail-Tutorial-12Making the Cuthttps://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegasfurnituremaker-dovetail-tutorial-11.jpgWoodworksbyJohn-LasVegasFurnituremaker-Dovetail-Tutorial-11Line Extended to Required Depthhttps://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-lasvegasfurnituremaker-dovetail-tutorial-10.jpgWoodworksbyJohn-LasVegasFurnituremaker-Dovetail-Tutorial-10https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-dovetail-slidinglid-2.jpgWoodworksbyJohn-Dovetail-SlidingLid-2https://woodworksbyjohn.com/wp-content/uploads/2013/09/woodworksbyjohn-dovetail-slidinglid-1.jpgWoodworksbyJohn-Dovetail-SlidingLid-12013-09-07T15:33:31+00:00monthlyhttps://woodworksbyjohn.com/2013/08/31/dovetailed-boxes-with-spalted-maple-lid/https://woodworksbyjohn.com/wp-content/uploads/2013/08/johns-drafting-table.jpgJohns Drafting TableStand-up Drafting Tablehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-a.jpgWoodworksbyJohn-SpaltedMaple-Blog-Ahttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-8.jpgWoodworksbyJohn-SpaltedMaple-Blog-8https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-7.jpgWoodworksbyJohn-SpaltedMaple-Blog-7Finger Fits just Fine!https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-6.jpgWoodworksbyJohn-SpaltedMaple-Blog-6Repeated Cut Sequence Twicehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-5.jpgWoodworksbyJohn-SpaltedMaple-Blog-5Taper Cuts with #7 Fishtailhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-4.jpgWoodworksbyJohn-SpaltedMaple-Blog-4Began with #5 Gouge to Outline Endhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-3.jpgWoodworksbyJohn-SpaltedMaple-Blog-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-2.jpgWoodworksbyJohn-SpaltedMaple-Blog-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-spaltedmaple-blog-1.jpgWoodworksbyJohn-SpaltedMaple-Blog-12013-08-31T14:37:08+00:00monthlyhttps://woodworksbyjohn.com/2013/08/28/mystery-box-postponed/https://woodworksbyjohn.com/wp-content/uploads/2013/08/showupdate-woodworksbyjohn-1.jpgShowupdate-WoodworksbyJohn-1https://woodworksbyjohn.com/wp-content/uploads/2013/08/shop-update-woodworksbyjohn.jpgshop update-WoodworksbyJohnhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/screen-shot-2013-08-28-at-5-14-52-pm.pngScreen Shot 2013-08-28 at 5.14.52 PM2013-08-29T03:15:08+00:00monthlyhttps://woodworksbyjohn.com/2013/08/24/computer-monitor-completed/2013-08-25T14:03:39+00:00monthlyhttps://woodworksbyjohn.com/2013/08/24/mr-melvin-wilson-metal-shop-antioch-high-school/https://woodworksbyjohn.com/wp-content/uploads/2013/08/wilson4.jpgWilson4https://woodworksbyjohn.com/wp-content/uploads/2013/08/wilson-3.jpgWilson-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/wilson-2.jpgWilson-2That's it down on the Groundhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/mr.jpgMrThat's it up in the Air2013-08-25T14:02:18+00:00monthlyhttps://woodworksbyjohn.com/2013/08/22/mystery-box-first-prototype/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-latch-3.jpgWoodworksbyJohn-MysteryBox-Prototype-Latch-3Using a Small Socket for Ball Catchhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-latch-2.jpgWoodworksbyJohn-MysteryBox-Prototype-Latch-2Small Router Plane for Finishhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-latch-1.jpgWoodworksbyJohn-MysteryBox-Prototype-Latch-1Outlining Slot for Latchhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-assembled-4.jpgWoodworksbyJohn-MysteryBox-Prototype-Assembled-4Mystery Box Latch Detailhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-assembled-3.jpgWoodworksbyJohn-MysteryBox-Prototype-Assembled-3Mystery Box Box Sides Openhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-assembled-2.jpgWoodworksbyJohn-MysteryBox-Prototype-Assembled-2Mystery Box Left Side Openhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-assembled-1.jpgWoodworksbyJohn-MysteryBox-Prototype-Assembled-1Mystery Box Closedhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-2.jpgWoodworksbyJohn-MysteryBox-Prototype-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-mysterybox-prototype-1.jpgWoodworksbyJohn-MysteryBox-Prototype-12013-08-22T20:00:29+00:00monthlyhttps://woodworksbyjohn.com/2013/08/21/the-mystery-box-prototype-1/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-8.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-8https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-6.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-6Smooth Plane for Face grainhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-5Block Plane for End grainhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-4Rabbet Block Plane for Exacthttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-2Tablesaw for Approximate Sizehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-1https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-mysterybox-prototype.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MysteryBox-Prototype-What the Heck ??2013-08-21T19:52:17+00:00monthlyhttps://woodworksbyjohn.com/2013/08/20/computer-monitor-cabinet-ready-for-finish/2013-08-21T00:21:32+00:00monthlyhttps://woodworksbyjohn.com/2013/08/17/computer-monitor-cabinet-final-details/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-finaldetails-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-FinalDetails-4https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-finaldetails-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-FinalDetails-3Drilling Hole #2https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-finaldetails-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-FinalDetails-2Lining up One Hinge Holehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-finaldetails-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-FinalDetails-12013-08-17T23:41:06+00:00monthlyhttps://woodworksbyjohn.com/2013/08/16/coped-doors-with-an-antique-almost-rockwell-shaper/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-rockwell-43-120-shaper-doors-4.jpgWoodworksbyJohn-Rockwell 43-120 Shaper-Doors-4https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-rockwell-43-120-shaper-doors-3.jpgWoodworksbyJohn-Rockwell 43-120 Shaper-Doors-3Shaping the Inside https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-rockwell-43-120-shaper-doors-2.jpgWoodworksbyJohn-Rockwell 43-120 Shaper-Doors-2Coping the Railhttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-rockwell-43-120-shaper-doors-1.jpgWoodworksbyJohn-Rockwell 43-120 Shaper-Doors-12024-05-20T13:38:58+00:00monthlyhttps://woodworksbyjohn.com/2013/08/13/computer-monitor-casework-the-saga-continues/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-computermonitor-assembled-4.jpgWoodworksbyJohn-ComputerMonitor-Assembled-4https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-computermonitor-assembled-3.jpgWoodworksbyJohn-ComputerMonitor-Assembled-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-computermonitor-assembled-2.jpgWoodworksbyJohn-ComputerMonitor-Assembled-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-computermonitor-assembled-1.jpgWoodworksbyJohn-ComputerMonitor-Assembled-12013-08-13T20:08:13+00:00monthlyhttps://woodworksbyjohn.com/2013/08/12/monitor-cabinet-continued/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-monitorcabinet-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonitorCabinet-3Paring Chisel to Finish Inner Edgehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-monitorcabinet-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonitorCabinet-2Block Plane to Finish Outer Edgehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-monitorcabinet-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonitorCabinet-1Flush Cut with Pattern Bithttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-monitorcabinet.jpgWoodworksbyJohn-CustomFurniture-LasVegas-MonitorCabinet-2013-08-12T14:35:11+00:00monthlyhttps://woodworksbyjohn.com/2013/08/10/head-scratcher-project/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-lasvegas-computermonitor-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-ComputerMonitor-1https://woodworksbyjohn.com/wp-content/uploads/2013/08/monitortemplate.jpgMonitorTemplate2013-08-10T22:55:52+00:00monthlyhttps://woodworksbyjohn.com/2013/08/09/berea-kentucky-souvenir/https://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-7.jpgBerea-Spoons-CurlyCherry-7https://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-6.jpgBerea-Spoons-CurlyCherry-6Reference Edge: Ahttps://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-5.jpgBerea-Spoons-CurlyCherry-5Shooting Board to Sizehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-4.jpgBerea-Spoons-CurlyCherry-4https://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-3.jpgBerea-Spoons-CurlyCherry-3https://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-2.jpgBerea-Spoons-CurlyCherry-2https://woodworksbyjohn.com/wp-content/uploads/2013/08/berea-spoons-curlycherry-1.jpgBerea-Spoons-CurlyCherry-12013-08-09T22:58:39+00:00monthlyhttps://woodworksbyjohn.com/2013/08/06/stools-are-finished/https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-barstools-lazysusan-3.jpgWoodworksbyJohn-CustomFurniture-Barstools-lazysusan-33. Found it!https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-barstools-lazysusan-2.jpgWoodworksbyJohn-CustomFurniture-Barstools-lazysusan-22. Locate this hole on the seat through the hole on the base https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-barstools-lazysusan-1.jpgWoodworksbyJohn-CustomFurniture-Barstools-lazysusan-11. Attach bearing to basehttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-barstools-finishing.jpgWoodworksbyJohn-CustomFurniture-Barstools-finishinghttps://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-barstools-before.jpgWoodworksbyJohn-CustomFurniture-Barstools-beforeExhibit B (for before)https://woodworksbyjohn.com/wp-content/uploads/2013/08/woodworksbyjohn-customfurniture-barstools-after.jpgWoodworksbyJohn-CustomFurniture-Barstools-afterExhibit B2013-08-06T19:18:52+00:00monthlyhttps://woodworksbyjohn.com/2013/07/20/bar-stool-makeover-continued/https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegasfurniture-barstool-makeover-4.jpgWoodworksbyJohn-LasVegasFurniture-BarStool-Makeover-4Measuring 14 3/4" to locate foot resthttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegasfurniture-barstool-makeover-3.jpgWoodworksbyJohn-LasVegasFurniture-BarStool-Makeover-3Set up to cut top rabbethttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegasfurniture-barstool-makeover-2.jpgWoodworksbyJohn-LasVegasFurniture-BarStool-Makeover-2https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegasfurniture-barstool-makeover-1.jpgWoodworksbyJohn-LasVegasFurniture-BarStool-Makeover-12013-08-04T21:30:14+00:00monthlyhttps://woodworksbyjohn.com/2013/07/25/bar-stools-continued-legs-and-seat/https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-balticbirch-barstools-legs-5.jpgWoodworksbyJohn-LasVegas-BalticBirch-BarStools-Legs-5https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-balticbirch-barstools-legs-4.jpgWoodworksbyJohn-LasVegas-BalticBirch-BarStools-Legs-4https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-balticbirch-barstools-legs-3.jpgWoodworksbyJohn-LasVegas-BalticBirch-BarStools-Legs-3https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-balticbirch-barstools-legs-2.jpgWoodworksbyJohn-LasVegas-BalticBirch-BarStools-Legs-23/16" Body Holehttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-balticbirch-barstools-legs-1.jpgWoodworksbyJohn-LasVegas-BalticBirch-BarStools-Legs-13/8" Forstner Bit for Plughttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-balticbirch-barstools-legs.jpgWoodworksbyJohn-LasVegas-BalticBirch-BarStools-Legs-Glued, Screwed, Plugged, and Drying in the Househttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-balticbirchlegs-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-BalticBirchLegs-4Drill Press Jig: Leg aligns with groovehttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-balticbirchlegs-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-BalticBirchLegs-3https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-balticbirchlegs-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-BalticBirchLegs-22013-07-26T22:23:56+00:00monthlyhttps://woodworksbyjohn.com/2013/07/23/bar-stool-continued-design-evolution/https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-seatmount-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Seatmount-4Shaper With Top Mounted Bearinghttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-seatmount-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Seatmount-3Brad Point Drill to Accurately Locate Holeshttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-seatmount-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Seatmount-2View of MDF Patternhttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-seatmount-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Seatmount-1Using Block Plane to Form Shapehttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-design-6.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Design-6https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-design-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Design-5https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-design-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Design-4Disc rotated and squared to first cuthttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-design-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Design-3Initial cut lined up with Center Linehttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-design-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Design-2https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-design-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Design-12013-07-23T21:59:32+00:00monthlyhttps://woodworksbyjohn.com/2013/07/18/bar-stool-makeover/https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-8.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-8https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-7.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-7https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-6.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-6One disc cut and only 7 to go!https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-4Initial Pass about 3/16" deephttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-3https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-2https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-customfurniture-lasvegas-barstool-makeover-1.jpgWoodworksbyJohn-CustomFurniture-LasVegas-BarStool-Makeover-12013-07-19T04:09:45+00:00monthlyhttps://woodworksbyjohn.com/2013/07/12/first-peek-but-not-like-at-the-movies/https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-b.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-bhttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-a.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-ahttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-6.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-6https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-5.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-5https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-3.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-3https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-2.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-2https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-customwoodworker-remotecontrolbox-1.jpgWoodworksbyJohn-LasVegas-CustomWoodworker-RemoteControlBox-12013-07-13T15:02:40+00:00monthlyhttps://woodworksbyjohn.com/2013/07/10/will-miss-this-box/https://woodworksbyjohn.com/wp-content/uploads/2013/07/dsc09976.jpgDSC09976Walnut & Curly Cherryhttps://woodworksbyjohn.com/wp-content/uploads/2013/07/dsc09975.jpgDSC099752013-12-04T17:49:27+00:00monthlyhttps://woodworksbyjohn.com/2013/07/06/traveling-time-me-and-a-box/2013-07-07T04:02:44+00:00monthlyhttps://woodworksbyjohn.com/2013/07/01/ah-but-its-a-dry-heat/https://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-slanteddovetail-walnut-quartersawnoak.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-Walnut-quartersawnoakhttps://woodworksbyjohn.com/wp-content/uploads/2013/07/woodworksbyjohn-lasvegas-slanteddovetail-lacewood-sapele.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-Lacewood-Sapelehttps://woodworksbyjohn.com/wp-content/uploads/2013/07/temp63013.jpgTemp6:30:132013-07-01T20:18:36+00:00monthlyhttps://woodworksbyjohn.com/2013/06/28/lining-the-bottom-of-a-box-2/2013-06-28T14:21:08+00:00monthlyhttps://woodworksbyjohn.com/2013/06/28/lining-the-bottom-of-a-box/https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-customfurniture-liningboxes-5.jpgWoodworksbyJohn-LasVegas-CustomFurniture-LiningBoxes-5https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-customfurniture-liningboxes-4.jpgWoodworksbyJohn-LasVegas-CustomFurniture-LiningBoxes-4https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-customfurniture-liningboxes-3.jpgWoodworksbyJohn-LasVegas-CustomFurniture-LiningBoxes-3https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-customfurniture-liningboxes-2.jpgWoodworksbyJohn-LasVegas-CustomFurniture-LiningBoxes-2https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-customfurniture-liningboxes-1.jpgWoodworksbyJohn-LasVegas-CustomFurniture-LiningBoxes-12013-06-28T14:19:59+00:00monthlyhttps://woodworksbyjohn.com/2013/06/25/slanted-dovetail-box-series/https://woodworksbyjohn.com/wp-content/uploads/2013/06/wooworksbyjohn-slanteddovetailbox-maplesplendor.jpgWooworksbyJohn-SlantedDovetailBox-MapleSplendorhttps://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-slanteddovetail-memorybox-5.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-MemoryBox-5https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-slanteddovetail-memorybox-4.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-MemoryBox-4https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-slanteddovetail-memorybox-3.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-MemoryBox-3https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-slanteddovetail-memorybox-2.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-MemoryBox-2https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-slanteddovetail-memorybox-1.jpgWoodworksbyJohn-LasVegas-SlantedDovetail-MemoryBox-1https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-customfurniture-lasvegas-slanteddovetail-5.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlantedDovetail-5https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-customfurniture-lasvegas-slanteddovetail-4.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlantedDovetail-4https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-customfurniture-lasvegas-slanteddovetail-3.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlantedDovetail-3https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-customfurniture-lasvegas-slanteddovetail-2.jpgWoodworksbyJohn-CustomFurniture-LasVegas-SlantedDovetail-22013-06-26T02:59:50+00:00monthlyhttps://woodworksbyjohn.com/contact-me/2013-06-23T21:03:40+00:00weekly0.6https://woodworksbyjohn.com/2013/06/21/final-work-on-the-craft-show-shelves/https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-waterbornelacquer-displayshelves.jpgWoodworksbyJohn-LasVegas-WaterborneLacquer-DisplayShelveshttps://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-waterbornelacquer-displayshelves-4.jpgWoodworksbyJohn-LasVegas-WaterborneLacquer-DisplayShelves-4https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-waterbornelacquer-displayshelves-3.jpgWoodworksbyJohn-LasVegas-WaterborneLacquer-DisplayShelves-3https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-waterbornelacquer-displayshelves-2.jpgWoodworksbyJohn-LasVegas-WaterborneLacquer-DisplayShelves-2https://woodworksbyjohn.com/wp-content/uploads/2013/06/woodworksbyjohn-lasvegas-waterbornelacquer-displayshelves-1.jpgWoodworksbyJohn-LasVegas-WaterborneLacquer-DisplayShelves-12013-06-22T23:31:30+00:00monthlyhttps://woodworksbyjohn.com/2013/06/17/starting-to-use-wordpress/2013-06-17T01:42:11+00:00monthlyhttps://woodworksbyjohn.comdaily1.02026-03-18T17:18:07+00:00